开展了SiC(20vol%)-石墨(15vol%)/ZrB2复合材料室温及高温拉伸性能实验,发现高温时复合材料的拉伸强度和弹性模量有所降低,并且具有明显的非线性特征.引入热损伤来表征弹性模量随温度的衰减规律,利用强度统计分析方法确定单向应力状态下材料的机械损伤演化方程,建立了材料在热力耦合条件下的高温拉伸损伤非线性本构模型.分析表明:随着温度的升高,SiC-石墨/ZrB2复合材料的热损伤和机械损伤不断增加,延性增强,且脆性-延性破坏转变温度范围为1 250~1 350℃.
参考文献
[1] | Rodolfo Monti;Mario De Stefano Fumo;Raffaele Savino.Thermal Shielding of a Reentry Vehicle by Ultra-High-Temperature Ceramic Materials[J].Journal of Thermophysics and Heat Transfer,20063(3):500-506. |
[2] | 王俊奎;周施真.陶瓷基复合材料的研究进展[J].复合材料学报,19907(04):1-7. |
[3] | Monteverde F;Bellosi A;Scatteia L.Processing and properties of ultra-high temperature ceramics for space applications[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,20081/2(1/2):415-421. |
[4] | Marc W. Bird;Robert P. Aune;Alfred F. Thomas.Temperature-dependent mechanical and long crack behavior of zirconium diboride-silicon carbide composite[J].Journal of the European Ceramic Society,201212(12):3453-3462. |
[5] | Rubing Zhang;Xiangmeng Cheng;Daining Fang;Liaoliang Ke;Yuesheng Wang.Ultra-high-temperature tensile properties and fracture behavior of ZrB_2-based ceramics in air above 1500℃[J].Materials & design,2013Dec.(Dec.):17-22. |
[6] | Wenbo Han;Xinghong Zhang;Weibin Tai;Jiecai Han.High temperature deformation of ZrB_2-SiC-AlN ceramic composite[J].Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing,20091/2(1/2):146-151. |
[7] | Kushch VI.;Sangani AS..Stress intensity factor and effective stiffness of a solid containing aligned penny-shaped cracks[J].International Journal of Solids and Structures,200044(44):6555-6570. |
[8] | Serkan Nohut;Chunsheng Lu.Fracture statistics of dental ceramics: Discrimination of strength distributions[J].CERAMICS INTERNATIONAL,20126(6):4979-4990. |
[9] | Ren Zhongjun;Peng Xianghe;Wan Ling.three-dimensional micromechanics model for the damage of brittlematerials based on the growth and unilateral effect of elliptic microcracks[J].Engineering Fracture Mechanics,20112(2):274-288. |
[10] | Shou-Wen Yu;Xi-Qiao Feng.A micromechanics-based damage model for microcrack-weakened brittle solids[J].Mechanics of materials,19951(1):59-76. |
[11] | Maire J F;Lesne P M.A damage model for ceramic matrix composites[J].AEROSPACE SCIENCE AND TECHNOLOGY,19971(04):259-266. |
[12] | Brencich A.;Gambarotta L..Isotropic damage model with different tensile-compressive response for brittle materials[J].International Journal of Solids and Structures,200134/35(34/35):5865-5892. |
[13] | Paul Leplay;Julien Rethore;Sylvain Meille;Marie-Christine Baietto.Damage law identification of a quasi brittle ceramic from a bending test using Digital Image Correlation[J].Journal of the European Ceramic Society,201013(13):2715-2725. |
[14] | 石建勋;刘新荣;方焘;刘元锋.液压轴压作用下陶瓷的统计损伤本构模型[J].兰州大学学报(自然科学版),2010(2):117-120. |
[15] | 孙志刚;宋迎东;苗艳;李龙彪.陶瓷基复合材料基体随机开裂的损伤模拟[J].复合材料学报,2009(4):130-135. |
[16] | L.F. He;X.P. Lu;Y.W. Bao.High-temperature internal friction, stiffness and strength of Zr-Al(Si)-C ceramics[J].Scripta materialia,20091(1):60-63. |
[17] | 刘泉声;许锡昌.温度作用下脆性岩石的损伤分析[J].岩石力学与工程学报,2000(4):408-411. |
[18] | Weiguo Li;Dingyu Li;Tianbao Cheng.Temperature-damage-dependent thermal shock resistance model for ultra-high temperature ceramics[J].Engineering Fracture Mechanics,2012:9-16. |
[19] | Mark M. Opeka;Inna G. Talmy.Mechanical, Thermal, and Oxidation Properties of Refractory Hafnium and Zirconium Compounds[J].Journal of the European Ceramic Society,199913/14(13/14):2405-2414. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%