采用环状对苯二甲酸丁二醇酯(CBT)预浸料,利用真空袋辅助热压工艺制备了玻璃纤维机织布-碳纤维机织布/聚环状对苯二甲酸丁二醇酯(GF-CF/PCBT)混杂复合材料层合板.利用双悬臂梁(DCB)和三点端部开口弯曲(3ENF)试验对连续纤维增强PCBT复合材料层合板的层间强度做出评估.同时,利用低速冲击试验结合Abaqus/Explicit有限元仿真重点考察了混杂纤维增强PCBT复合材料层合板的低速冲击性能.试验结果表明:尽管CF/PCBT复合材料层合板具有优异的层间性能,当冲击能量为114.3 J时,由于CF自身的脆性,CF/PCBT复合材料层合板被完全穿透,而GF-CF/PCBT混杂复合材料层合板只在表面形成凹痕.与纯CF增强PCBT复合材料层合板相比,铺层形式为[CF/GF/CF]25的GF-CF/PCBT混杂复合材料层合板的抗冲击损伤能力提高2倍.仿真得到的云图显示,冲击引起的应力在CF中的分布区域要明显大于在GF中的分布区域.
参考文献
[1] | Shengqing Zhu;Gin Boay Chai.Low-velocity impact response of fibre-metal laminates - Experimental and finite element analysis[J].Composites science and technology,201215(15):1793-1802. |
[2] | Volnei Tita;Jonas de Carvalho;Dirk Vandepitte.Failure analysis of low velocity impact on thin composite laminates: Experimental and numerical approaches[J].Composite structures,20084(4):413-428. |
[3] | Low-velocity impact damage on dispersed stacking sequence laminates. Part I: Experiments[J].Composites science and technology,20097/8(7/8):926-936. |
[4] | Low-velocity impact damage on dispersed stacking sequence laminates. Part II: Numerical simulations[J].Composites science and technology,20097/8(7/8):937-947. |
[5] | K.Pang;R.Kotek;A.Tonelli.Review of conventional and novel polymerization processes for polyesters[J].Progress in Polymer Science,200611(11):1009-1037. |
[6] | Ishak ZAM;Shang PP;Karger-Kocsis J.A modulated dsc study on the in situ polymerization of cyclic butylene terephthalate oligomers[J].Journal of thermal analysis and calorimetry,20063(3):637-641. |
[7] | 张翼鹏;颜春;阮春寅;丁江平;刘俊龙;范欣愉.原位聚合法制备连续玻璃纤维增强PCBT复合材料及其性能[J].复合材料学报,2012(4):29-35. |
[8] | A. Agirregomezkorta;A.B. Martinez;M. Sanchez-Soto;G. Aretxaga;M. Sarrionandia;J. Aurrekoetxea.Impact behaviour of carbon fibre reinforced epoxy and non-isothermal cyclic butylene terephthalate composites manufactured by vacuum infusion[J].Composites, Part B. Engineering,20125(5):2249-2256. |
[9] | Hilde Parton;Joris Baets;Ignaas Verpoest;Bart Goderis;Jacques Devaux;Pascale Lipnik.Properties of poly(butylene terephthatlate) polymerized from cyclic oligomers and its composites[J].Polymer: The International Journal for the Science and Technology of Polymers,200523(23):9871-9880. |
[10] | Z.A. Mohd Ishak;Y.W. Leong;M. Steeg;J. Karger-Kocsis.Mechanical properties of woven glass fabric reinforced in situ polymerized poly(butylene terephthalate) composites[J].Composites science and technology,20073/4(3/4):390-398. |
[11] | Zhenyu Jiang;Suchart Siengchin;Li-Min Zhou.Poly (butylene terephthalate)/silica nanocomposites prepared from cyclic butylene terephthalate[J].Composites, Part A. Applied science and manufacturing,20093(3):273-278. |
[12] | 谢永刚 .复合材料机械连接性能研究及接头设计[D].哈尔滨工程大学,2013. |
[13] | Alvaro Olmedo;Carlos Santiuste.On the prediction of bolted single-lap composite joints[J].Composite structures,20126(6):2110-2117. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%