根据有效应力准则和达西定律,结合曲线坐标系,构建了曲面复合材料构件固化过程中的树脂流动和纤维压实控制方程;建立了基于AS4/3501-6纤维树脂体系的层合板仿真模型,并将分析结果与实验数据对比,验证了模型的有效性;研究了曲率参数对复合材料构件非等温固化压实的影响规律,比较和分析了曲率参数与厚度和压力参数耦合作用下对树脂流动行为的影响机制.结果表明:构件曲率参数会对树脂分布产生一定影响,曲率越大,树脂分布的非均匀性越大;曲率参数的作用表达受到厚度与压力参数的影响,当厚度与压力较小时,对曲率的影响不明显.
参考文献
[1] | A. S. Ganapathi;Sunil C. Joshi;Zhong Chen.Simulation of bleeder flow and curing of thick composites with pressure and temperature dependent properties[J].Simulation modelling practice and theory: International journal of the Federation of European Simulation Societies,2013:64-82. |
[2] | 张纪奎;郦正能;关志东;程小全;刘涛.复合材料层合板固化压实过程有限元数值模拟及影响因素分析[J].复合材料学报,2007(2):125-130. |
[3] | 张纪奎;张江;马志阳;程小全.厚截面层合板非同步固化的三维有限元分析[J].北京航空航天大学学报,2013(11):1464-1469. |
[4] | 李艳霞;李敏;张佐光;顾轶卓.L形复合材料层板热压工艺密实变形过程的数值模拟[J].复合材料学报,2008(3):78-83. |
[5] | S.C. Joshi;X.L. Liu.A numerical approach to the modeling of polymer curing in fibre-reinforced composites[J].Composites science and technology,19997(7):1003-1013. |
[6] | Yan XQ.Finite element modeling of curing of epoxy matrix composites[J].Journal of Applied Polymer Science,20074(4):2310-2319. |
[7] | Yan XQ.Consolidation and cure simulations for laminated composites[J].Journal of Composite Materials,200620(20):1853-1869. |
[8] | Daniel D.Shin;H.Thomas Hahn.Compaction of Thick Composites:Simulation and Experiment[J].Polymer Composites,20041(1):49-59. |
[9] | Pascal Hubert;Anoush Poursartip;Composites Group.Aspects of the Compaction of Composite Angle Laminates: An Experimental Investigation[J].Journal of Composite Materials,20011(1):2-26. |
[10] | 马云荣;贺继林;李栋;谭耀;徐雷.树脂基复合材料曲面结构件固化变形数值模拟[J].复合材料学报,2015(3):874-880. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%