针对多钉连接中因复合材料脆性等因素导致结构中的钉载分配不均匀,以及接头在承载较大的钉位置易发生过早破坏的问题,提出了调整钉孔配合间隙改善钉载分配的不均匀性的优化方法.首先,基于弹簧质量模型,以钉孔间隙为设计变量,建立了多钉连接钉载分配的二次规划优化模型.然后,采用内点法对优化模型进行了求解,得到了优化模型的全局最优解.最后,以复合材料5钉双剪接头为例,对钉孔间隙进行了优化,将计算结果与有限元预测结果进行对比.结果表明:模型优化结果与有限元结果吻合较好,优化后最大钉载比例由41.1%降低到了20%.采用该模型可以高效、准确地实现复合材料多钉连接钉载分配比例的均匀化设计.
参考文献
[1] | 张震 .一种分析复合材料多螺栓连接件受力的数值解析方法[D].西北工业大学,2007. |
[2] | 蒋持平;张行.多钉连接件钉传载荷计算的一个解析方法[J].航空学报,1994(03):310. |
[3] | M.A. McCarthy;C.T. McCarthy;G.S. Padhi.A simple method for determining the effects of bolt-hole clearance on load distribution in single-column multi-bolt composite joints[J].Composite structures,20061(1):78-87. |
[4] | C.T. McCarthy;PJ. Gray.An analytical model for the prediction of load distribution in highly torqued multi-bolt composite joints[J].Composite structures,20112(2):287-298. |
[5] | McCarthy MA;Lawlor VP;Stanley WF.An experimental study of bolt-hole clearance effects in single-lap, multibolt composite joints[J].Journal of Composite Materials,20059(9):799-825. |
[6] | P. J. Gray;C. T. McCarthy.A global bolted joint model for finite element analysis of load distributions in multi-bolt composite joints[J].Composites, Part B. Engineering,20104(4):p.317. |
[7] | Johan Ekh;Joakim Schoen.Finite element modeling and optimization of load transfer in multi-fastener joints using structural elements[J].Composite structures,20082(2):245-256. |
[8] | Jong-Hwa Yun;Jin-Ho Choi;Jin-Hwe Kweon.A study on the strength improvement of the multi-bolted joint[J].Composite structures,2014Feb.(Feb.):409-416. |
[9] | 黄豪杰 .复合材料多钉连接载荷分配均匀化方法[D].西北工业大学,2007. |
[10] | Johan Ekh;Joakim Schoen.Load transfer in multirow, single shear, composite-to-aluminium lap joints[J].Composites science and technology,20067/8(7/8):875-885. |
[11] | R. L. Actis;B. A. Szabo.Analysis of Bonded and Fastened Repairs by the p-Version of the Finite-Element Method[J].Computers & Mathematics with Applications: An International Journal,20031(1):1-14. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%