基于经典层合板理论(CLT),提出一个多参数解析模型,定量研究了面外波纹缺陷对含波纹缺陷的复合材料层合板弹性模量、剪切模量和泊松比等弹性性能的影响.结果表明:面外波纹对主弹性模量、Z向弹性模量、X-Z平面剪切模量和面内泊松比都产生了显著影响;对于碳纤维/环氧树脂材料体系算例,在特定波纹比和波纹区域范围内,面内泊松比出现了负值.该建模方法为研究波纹缺陷对复合材料层合板弹性性能影响提供了参考.
参考文献
| [1] | Joyce PJ.;Moon TJ.;Kugler D..A TECHNIQUE FOR CHARACTERIZING PROCESS-INDUCED FIBER WAVINESS IN UNIDIRECTIONAL COMPOSITE LAMINATES - USING OPTICAL MICROSCOPY[J].Journal of Composite Materials,199717(17):1694-1727. |
| [2] | Martin Leong;Lars C.T. Overgaard;Ole T. Thomsen;Erik Lund;Isaac M. Daniel.Investigation of failure mechanisms in GFRP sandwich structures with face sheet wrinkle defects used for wind turbine blades[J].Composite structures,20122(2):768-778. |
| [3] | J. Wang;K. D. Potter;M. R. Wisnom.Failure mechanisms under compression loading in composites with designed out-of-plane fibre waviness[J].Plastics, Rubber and Composites,20136(6):231-238. |
| [4] | H. M. Hsiao;I. M. Daniel.Nonlinear elastic behavior of unidirectional composites with fiber waviness under compressive loading[J].Journal of engineering materials and technology,19964(4):561-570. |
| [5] | Heoung-Jae Chun;Jai-Yoon Shin;Isaac M. Daniel.Effects of material and geometric nonlinearities on the tensile and compressive behaivor of composite materials with fiber waviness[J].Composites science and technology,20011(1):125-134. |
| [6] | Mark R.Garnich.Finite Element Micromechanics for Stiffness and Strength of Wavy Fiber Composites[J].Journal of Composite Materials,20044(4):273-292. |
| [7] | MARK R.GARNICH;GHODRAT KARAMI.Localized Fiber Waviness and Implications for Failure in Unidirectional Composites[J].Journal of Composite Materials,200514(14):1225-1245. |
| [8] | 王立朋;燕瑛.编织复合材料弹性性能的细观分析及试验研究[J].复合材料学报,2004(4):152-156. |
| [9] | 张超;许希武.二维二轴编织复合材料几何模型及弹性性能预测[J].复合材料学报,2010(5):129-135. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%