针对中国缺少T800级复合材料螺栓连接设计参数的问题,发展一种综合连续损伤力学(CDM)和工程算法的单剪连接强度估算策略,以替代试验,降低研究周期和成本.在该强度估算策略中,首先建立试件的CDM有限元模型,通过数值模拟得到单剪螺栓连接的设计参数,包括单剪挤压强度修正系数、无缺口层合板拉伸强度和应力集中减缓因子等.随后根据上述参数,建立工程算法,估算复合材料单剪螺栓连接的最终挤压强度.结果表明:通过该策略得到的T800级复合材料螺栓连接设计参数和强度估算结果与试验结果有较好的一致性,说明该强度估算策略的可行性.
参考文献
[1] | P.J. Gray;R.M. O'Higgins;C.T. McCarthy.Effect of thickness and laminate taper on the stiffness, strength and secondary bending of single-lap, single-bolt countersunk composite joints[J].Composite structures,2014Jan.(Jan.):315-324. |
[2] | Zhai, Yunong;Li, Dongsheng;Li, Xiaoqiang;Wang, Liang;Yin, Yu.An experimental study on the effect of bolt-hole clearance and bolt torque on single-lap, countersunk composite joints[J].Composite structures,2015Sep.(Sep.):411-419. |
[3] | 唐玉玲;周振功;泮世东;田爽.三维六向编织复合材料单剪搭接连接结构在拉伸载荷下的力学性能[J].复合材料学报,2015(2):515-525. |
[4] | J. EKH;J. SCHON.Effect of secondary bending on strength prediction of composite, single shear lap joints[J].Composites science and technology,20056(6):953-965. |
[5] | 张纪奎;马志阳;程小全;陈纲.复合材料三钉单搭连接有限元模拟与钉载分布[J].复合材料学报,2012(3):179-183. |
[6] | A. Olmedo;C. Santiuste;E. Barbero.An analytical model for the secondary bending prediction in single-lap composite bolted-joints[J].Composite structures,2014May(May):354-361. |
[7] | 何柏灵;葛东云;莫与明;杜旭朕.T800碳纤维增强复合材料双剪单钉连接的拉伸试验及强度估算[J].复合材料学报,2016(7):1540-1552. |
[8] | Zhao, Libin;Qin, Tianliang;Zhang, Jianyu;Shan, Meijuan;Fei, Binjun.Determination method of stress concentration relief factors for failure prediction of composite multi-bolt joints[J].Journal of Composite Materials,201514(14):1667-1680. |
[9] | 赵丽滨;秦田亮;山美娟;张建宇.基于渐进损伤分析的复合材料螺栓连接强度包线法研究[J].复合材料学报,2015(3):823-830. |
[10] | Kapidzic, Zlatan;Ansell, Hans;Schon, Joakim;Simonsson, Kjell.Quasi-static bearing failure of CFRP composite in biaxially loaded bolted joints[J].Composite structures,2015Jul.(Jul.):60-71. |
[11] | Yi Xiao;Wen-Xue Wang;Yoshihiro Takao;Kyushu University;Takashi Ishikawa.The effective friction coefficient of a laminate composite, and analysis of pin-loaded plates[J].Journal of Composite Materials,20001(1):69-87. |
[12] | Alvaro Olmedo;Carlos Santiuste.On the prediction of bolted single-lap composite joints[J].Composite structures,20126(6):2110-2117. |
[13] | Ireneusz Lapczyk;Juan A. Hurtado.Progressive damage modeling in fiber-reinforced materials[J].Composites, Part A. Applied science and manufacturing,200711(11):2333-2341. |
[14] | 陈昆昆 .复合材料加筋板-钛合金机械连接结构优化[D].上海交通大学,2013. |
[15] | 钟小丹;陈普会;刘利阳;王进.复合材料增压舱双圆截面交点连接设计分析[J].航空学报,2013(10):2357-2363. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%