基于复合材料缠绕成型工艺过程研究,分别对成型过程中紧密接触与自粘接过程进行理论分析,提出影响复合材料缠绕制品质量的关键工艺参数:缠绕温度、缠绕压力和缠绕张力;以层间剪切强度(ILSS)为优化目标,根据响应面法Box-Behnken Design(BBD)原理设计实验,建立工艺参数耦合对剪切强度的回归模型,通过对残差、方差(ANVOA)、预测值与实际值对比等检验分析,验证回归模型的可靠性及有效性,进而获得缠绕成型最优工艺参数.结果表明:在最优工艺参数作用下,层间剪切强度达到22.9 MPa,缠绕制品结合强度最高.
参考文献
| [1] | Bijan Shirinzadeh;Gary Cassidy;Denny Oetomo;Gursel Alici;Marcelo H. Ang Jr.Trajectory generation for open-contoured structures in robotic fibre placement[J].Robotics and Computer Integrated Manufacturing: An International Journal of Manufacturing and Product and Process Development,20074(4):380-394. |
| [2] | Tauseef Aized;Bijan Shirinzadeh.Robotic fiber placement process analysis and optimization using response surface method[J].The International Journal of Advanced Manufacturing Technology,20111/4(1/4):393-404. |
| [3] | Namiko Yamamoto;Roberto Guzman de Villoria;Brian L. Wardle.Electrical and thermal property enhancement of fiber-reinforced polymer laminate composites through controlled implementation of multi-walled carbon nanotubes[J].Composites science and technology,201216(16):2009-2015. |
| [4] | W. Polini;L. Sorrentino.Influence of winding speed and winding trajectory on tension in robotized filament winding of full section parts[J].Composites science and technology,200510(10):1574-1581. |
| [5] | Pitchumani R.;Lamontia MA.;Gillespie JW..DESIGN AND OPTIMIZATION OF A THERMOPLASTIC TOW-PLACEMENT PROCESS WITH IN-SITU CONSOLIDATION[J].Journal of Composite Materials,19973(3):244-275. |
| [6] | Dirk Heider;Michael J. Piovoso;John W. Gillespie.A neural network model-based open-loop optimization for the automated thermoplastic composite tow-placement system[J].Composites, Part A. Applied science and manufacturing,20038(8):791-799. |
| [7] | Fazil O. Sonmez;Mustafa Akbulut.Process optimization of tape placement for thermoplastic composites[J].Composites, Part A. Applied science and manufacturing,20079(9):2013-2023. |
| [8] | Tierney J;Gillespie JW.Modeling of in situ strength development for the thermoplastic composite tow placement process[J].Journal of Composite Materials,200616(16):1487-1506. |
| [9] | J. S. U. Schell;J. Guilleminot;C. Binetruy;P. Krawczak.Computational and experimental analysis of fusion bonding in thermoplastic composites: Influence of process parameters[J].Journal of Materials Processing Technology,200911(11):5211-5219. |
| [10] | Shao Cong Dai;Lin Ye.Characteristics of CF/PEI tape winding process with on-line consolidation[J].Composites, Part A. Applied science and manufacturing,20029(9):1227-1238. |
| [11] | C Ageorges;L. Ye;M. Hou.Advances in fusion bonding techniques for joining thermoplastic matrix composites: a review[J].Composites, Part A. Applied science and manufacturing,20016(6):839-857. |
| [12] | 史耀耀;唐虹;余强.数控布带缠绕机关键技术[J].航空学报,2008(1):233-239. |
| [13] | REN Sheng-le;LU Hua;WANG Yong-zhang;FU Hong-ya.Development of PLC-based Tension Control System[J].中国航空学报（英文版）,2007(03):266-271. |
| [14] | 李旭武;周晓东;郭兵兵;万立.工艺条件对两步法缠绕成型连续玻璃纤维增强聚丙烯管材层间剪切强度及树脂含量的影响[J].玻璃钢/复合材料,2011(6):64-67. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%