欢迎登录材料期刊网

材料期刊网

高级检索

采用二次生长法,在廉价大孔α-Al2O3管状载体上通过变温热浸渍涂晶法获得连续致密的晶种层,在摩尔配比为1SiO2:0.05Al2O3:0.26Na2O:0.09K2O:30H2O清液体系中120℃水热晶化16 h成功制备出T型分子筛膜。实验考察了小晶种液浓度,晶化时间对T型沸石分子筛膜的形貌和性能的影响。XRD和SEM结果表明,晶化过程中晶种的外延生长和新的晶核成核过程同时进行,晶种的外延生长和新核的诱导作用产生协同作用,缩短 T 型沸石膜的生长时间。将制备的T型沸石分子筛膜用于75℃渗透汽化分离10wt%水/异丙醇体系,其渗透通量和分离系数分别达到2.96 kg/(m2·h)和6400。

T-type zeolite membrances with high permeation performance were successfully synthesized on the low cost macroporousα-Al2O3 tubular support by secondary growth from clear solutions. The effects of the con-centration of seeds and the membrane crystallization time on the morphology and pervaporation properties of zeo-lite T membrances. When the molar ration of the synthesis solution was 1SiO2:0.05Al2O3:0.26Na2O:0.09K2O: 30H2O, a high quality T zeolite membrane was obtained at crystallization temperature of 120℃ for 16 h, with water flux of 2.96 kg/(m2·h) and separation factor of 6400 for dehydration of IPA aqueous solution by pervaporation at 75℃. XRD pattern and SEM observation suggested that the shortened membrane crystallization time resulted from the secondary nucleation induced by the seeds and the seeds epitaxial growth.

参考文献

上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%