目的：对连续铸造过程中凝固模型表面喷雾冷却进行优化，实现表面温度的最优冷却。方法分析板坯的连铸工艺过程，推导板坯连铸的凝固模型，获得热传递方程式，对冷却过程的边界条件进行约束。对凝固模型进行仿真验证，与基准温度变化曲线进行比较。结合具体实例确定冷却过程中需要优化的目标对象，采取遗传算法搜索最优解，对相关参数进行仿真。结果和优化前相比，优化后板坯凝固过程中单位时间内温度变化波动较小，水流量密度最大值约为35 L/( m2·s)。结论优化后的板坯连铸过程中单位时间内喷雾冷却温度变化均匀，喷水量较少，能避免板坯连铸凝固模型表面裂纹的产生，提高产品的质量，效果较好。
Objective To optimize spray cooling of solidification model surface in the process of continuous casting so as to real-ize the optimal cooling surface temperature. Methods The analysis of the continuous slab casting process was conducted, the solidi-fication model of continuous slab casting was deduced and the heat transfer equations were given to constraint boundary conditions of cooling process. The model of solidification simulation was verified and compared with the reference temperature change curve. In combination with a practical example, the target object needed to be optimized was determined during the cooling process. The ge-netic algorithm was adopted to search the optimal solution, and the relevant parameters were simulated. Results Compared with be-fore simulation, the temperature fluctuation per unit time was small during the solidification process of slab after optimization and the maximum water flow density was about 35 L/( m2 ·s) . Conclusion The fluctuation of spray cooling temperature was evenly in the optimized process of continuous slab casting in unit time and the water quantity was less, avoiding cracks on the surface of slab caster solidification model and improving the quality of the products, which achieved better effects.
参考文献
| [1] | 赵勇;郭瑞光;牛林清;雷勇刚;史丽萍.DTAB和甘氨酸对钢铁表面氟铁酸盐转化膜耐蚀性的影响[J].表面技术,2014(3):15-19,30. |
| [2] | 刘梦兰;向可友;王建华;徐良.PRO-pHx酸活剂在电镀零件酸洗中的应用研究[J].表面技术,2015(11):134-137. |
| [3] | 程常桂;万文成;车芳;余乐;刘中天.宽板坯连铸二冷区喷嘴冷却特性研究[J].武汉科技大学学报（自然科学版）,2010(5):453-457. |
| [4] | 靳星;陈登福;龙木军;张健;陈嫚丽.连铸二冷区喷嘴布置方式优化方法[J].重庆大学学报,2011(1):53-59,76. |
| [5] | 高文江;邓如厅;沈厚发.基于瞬态传热数学模型的板坯连铸二冷优化[J].热加工工艺,2014(21):91-94,100. |
| [6] | 李艳磊;王南;孟彩茹;张静超.板坯连铸二冷动态配水控制研究[J].铸造技术,2015(1):141-146. |
| [7] | 张亚竹;赵增武;胡强;温治.基于反传热计算的连铸气雾喷射冷却传热测量研究[J].铸造技术,2015(2):386-388. |
| [8] | Zhaofeng Wang;Man Yao;Xudong Wang;Xiaobing Zhang;Longsheng Yang;Hongzhou Lu;Xiong Wang.Inverse problem-coupled heat transfer model for steel continuous casting[J].Journal of Materials Processing Technology,20141(1):44-49. |
| [9] | Xudong Wang;Ling Tang;Xinyang Zang;Man Yao.Mold transient heat transfer behavior based on measurement and inverse analysis of slab continuous casting[J].Journal of Materials Processing Technology,20129(9):1811-1818. |
| [10] | 丁玲;孙辉;贾宏光;杨洪波.应用遗传算法优化设计机翼复合材料蜂窝夹层结构蒙皮[J].光学精密工程,2014(12):3272-3279. |
| [11] | 史旭东;陈亮;张碧辉;金延伟;欧忠明.基于遗传算法的大展弦比复合材料机翼结构优化设计[J].航空工程进展,2015(1):110-115. |
| [12] | Hetmaniok, Edyta;Slota, Damian;Zielonka, Adam.Restoration of the cooling conditions in a three-dimensional continuous casting process using artificial intelligence algorithms[J].Applied mathematical modelling,201516(16):4797-4807. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%