欢迎登录材料期刊网

材料期刊网

高级检索

目的 提高Nb-TiAl合金的抗高温氧化性能.方法 采用NaF为催化剂、1080℃下Si-Y扩散共渗5h的方法,在高Nb-TiA1表面制备了Y改性硅化物渗层,利用SEM、EDS和XRD分析了渗剂中Y2O3含量对共渗层组织及相组成的影响.结果 采用不同含量Y2O3所制备的Si-Y共渗层具有多层复合结构,共渗层的厚度随Y元素的添加呈先增大后减小的趋势,共渗层的内层均由γ-TiAl相组成;当渗剂中Y2O3含量为2%和3%(质量分数)时,共渗层的外层主要为(Ti,Nb)Si2相,中间层分为上下两层,分别为(Ti,Nb)5Si4相和(Ti,Nb)sSi3相,其中2%Y2O3的Si-Y共渗层有一层富A1的(Ti,Nb)5Si4和(Ti,Nb)5Si3相组成的浅表层;当渗剂中Y2O3含量为0%、1%和5%时,共渗层外层以(Ti,Nb)5Si4相为主,中间层主要为(Ti,Nb)5Si3相.结论 稀土Y元素质量分数为2%~3%时具有明显的促渗作用,且获得的Si-Y渗层组织结构致密,但添加过量的稀土元素会抑制Si元素的吸附与扩散,使得Si-Y共渗层中产生较多的孔洞,同时渗层的组织结构发生了改变.

参考文献

[1] 陈玉勇;苏勇君;孔凡涛.TiAl金属间化合物制备技术的研究进展[J].稀有金属材料与工程,2014(3):757-762.
[2] 刘志光;柴丽华;陈玉勇;孔凡涛.快速凝固TiAl化合物的研究进展[J].金属学报,2008(5):569-573.
[3] J.R. Nicholls.Advances in Coating Design for High-Performance Gas Turbines[J].MRS bulletin,20039(9):659-670.
[4] Zhang, P.;Guo, X..Y and Al modified silicide coatings on an Nb-Ti-Si based ultrahigh temperature alloy prepared by pack cementation process[J].Surface & Coatings Technology,20112/3(2/3):446-454.
[5] Mathieu, S.;Chaia, N.;Le Flem, M.;Vilasi, M..Multi-layered silicides coating for vanadium alloys for generation IV reactors[J].Surface & Coatings Technology,201222(22):4594-4600.
[6] 齐福刚;张丁非;张孝华;潘复生.稀土Y对Mg-Zn-Mn镁合金显微组织和力学性能的影响[J].中国有色金属学报(英文版),2014(5):1352-1364.
[7] Yongquan Li;FaqinXie;XiangqingWu;Xuan Li.Effects of Y_2O_3 on the microstructures and wear resistance of Si-Al-Y co-deposition coatings prepared on Ti-Al alloy by pack cementation technique[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,2013Dec.15(Dec.15):30-36.
[8] LIN Naiming;XIE Faqin;WU Xiangqing;TIAN Wei.Influence of process parameters on thickness and wear resistance of rare earth modified chromium coatings on P110 steel synthesized by pack cementation[J].稀土学报(英文版),2011(04):396-400.
[9] 徐向荣;黄拿灿;杨少敏.稀土表面改性在改善高温抗氧化和耐蚀性方面的应用[J].热处理技术与装备,2006(3):8-12.
[10] Alfeu Saraiva Ramos;Carlos Angelo Nunes;Gilberto Carvalho Ocelot.On the peritectoid Ti_3Si formation in Ti-Si alloys[J].Materials Characterization,20062(2):107-111.
[11] 李轩;郭喜平;乔彦强.Nb-Ti-Si-Cr基超高温合金表面ZrSi2-NbSi2复合渗层的组织及其抗高温氧化性能[J].金属学报,2015(6):693-700.
[12] Sanjib Majumdar;Indrakumar Sharma;Indradev Samajdar.Relationship Between Pack Chemistry and Growth of Silicide Coatings on Mo-TZM Alloy[J].Journal of the Electrochemical Society,200812(12):D734-D741.
[13] K. L. Wang;Q. B. Zhang;M. L. Sun.Microstructural characteristics of laser clad coatings with rare earth metal elements[J].Journal of Materials Processing Technology,20031/3(1/3):448-452.
[14] 齐涛;郭喜平.铌硅化物基超高温合金Si-Y_2O_3共渗涂层的组织及其高温抗氧化性能[J].无机材料学报,2009(6):1219-1225.
[15] 李涌泉;谢发勤;吴向清.包渗工艺制备TiAl合金表面Si-Y共渗层的组织和抗高温氧化性能[J].中国有色金属学报(英文版),2015(3):803-810.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%