适当磷含量可提高细晶镍基GH4133合金的力学性能,采用控制热加工和热处理的方法将GH4133合金的晶粒度细化至ASTM 10级.该细晶合金的最低屈服强度比晶粒度为ASTM 4-5级正常组织的合金高200 MPa以上,最低断裂强度高150 MPa以上.磷含量为0.140%(质量分数,下同)的细晶合金的屈服强度相对于正常磷含量(0.005%)的细晶合金又高约100 MPa,断裂强度约高50 MPa.镍基GH4133合金中,磷含量低于0.140%,拉伸试样均呈穿晶断裂.磷含量低于0.023%时,冲击断口呈穿晶断裂,冲击韧性高于70 MJ/m2;磷含量升至0.140%时,冲击断口部分区域呈沿晶断裂,冲击韧性约降至40 MJ/m2.延长GH4133合金持久寿命的最佳磷含量位于0.011%附近.结合位错与磷原子气团的相互作用讨论了上述不同载荷方式下磷对合金力学性能的影响特点.
参考文献
| [1] | Hu Z Q, Sun W R, Guo S R. Acta Metall Sin (Eng Lett),1996; 9:443 |
| [2] | Cao W D, Kennedy R L. In: Loria E A, ed., Superalloys 718, 625 and Various Derivatives, Warrendale, PA:TMS-AIME, 1994:463 |
| [3] | Cao W D, Kennedy R L. In: Kissinger R D, Deye D J,Anton D L, Cetel A D, Nathal M V, Pollock T M, Woodford D A, eds., Superalloys 1996, Warrendale, PA: TMSAIME, 1996:589 |
| [4] | Sun W R, Guo S R, Lu D Z, Li Z C, Tong B Y, Hu Z Q. In:Hanada S, Zhong Z, Nam S W, Wright R N, eds., 4th Pacific Rim Int Conf on Advanced Materials and Processing (PRICM4), The Japan Institute of Metals, 1996:2719 |
| [5] | Song H W. PhD Thesis, Institute of Metal Research, The Chinese Academy of Sciences, Shenyang, 1999(宋洪伟.中国科学院金属研究所博士学位论文,沈阳,1999) |
| [6] | Hu Z Q, Sun W R, Guo S R, Lu D Z. J Iron Steel Res,2002; (Spec Issue): 337. In: Xin P, Hu L, Ju D Y, eds.,The 3rd Int Forum on Advanced Materials Science and Technology, Anshan, Anshan University of Science and Technology, 2002 |
| [7] | Hu Z Q, Sun W R, Guo S R, Lu D Z. J Iron Steel Res,2002; (Spec Issue): 337. In: Xin P, Hu L, Ju D Y, eds.,The 3rd Int Forum on Advanced Materials Science and Technology, Anshan, Anshan University of Science and Technology, 2002 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%