在完全热力耦合搅拌摩擦焊接数值模型中采用两种接触模型--经典的Coulomb接触模型和修正的Coulomb接触模型,模拟了搅拌摩擦焊接过程,以分析不同接触模型对搅拌摩擦焊接过程数值模拟的影响.结果表明,对于低转速的搅拌摩擦焊接,两种模型的预测结果区别不大;但是对于高转速,由于界面摩擦剪切应力没有上限,采用经典的Coulomb接触模型无法模拟,需采用修正的Coulomb接触模型.搅拌头转速的增加不会改变搅拌摩擦焊接技术固态连接的本质.当采用高转速时,焊接构件上、下表面的变形趋于均匀.有利于得到均匀的显微结构.
参考文献
| [1] | Mishra R S,Ma Z Y.Mater Sci Eng,2005; R50:1 |
| [2] | Ericsson M,Sandstrom R.lnt J Fatigue,2003; 25:1379 |
| [3] | Peel M,Steuwer A,Preuss M,Withers P J.Aeta Mater,2003; 51:4791 |
| [4] | Gharacheh M A,Kokabi A H,Daneshi G H,Shalchi B,Sarrafi R.Int J Mach Tools Manuf,2006; 46:1983 |
| [5] | James M N,Hattingh D G,Bradley G R.Int J Fatigue,2003; 25,1389 |
| [6] | Kim Y G,Fujii H,Tsumura T,Komazaki T,Nakata K.Mater Lett,2006; 60:3830 |
| [7] | Hassan Kh A A,Prangness P B,Norman A F,Price D A,Williams S W.Sci Technol Weld Joining,2003; 8:257 |
| [8] | Attallah M M,Salem H G.Mater Sci Eng,2005; A391:51 |
| [9] | Reynolds A P,Tang W,Khandkar Z,Khan J A,Lindner K.Sci Technol Weld Joining,2005; 10:190 |
| [10] | Feng J C,Chen Y C,Liu H J.Mater Sci Technol,2006;22(1):86 |
| [11] | Ren S R,Ma Z Y,Chen L Q,Zhang Y Z.Acta Metall Sin,2007; 43:225(任淑荣,马宗义,陈礼清,张玉政.金属学报,2007;43:225) |
| [12] | Zhang H W,Zhang Z,Chen J T.J Mater Process Teehnol,2007;183:62 |
| [13] | Zhang Z,Zhang H W.Chin J Mater Res,2006; 20:504(张昭,张洪武.材料研究学报,2006;20:504) |
| [14] | Liu H J,Pan Q,Kong Q W,Tang X D,Su L,Li X J,Sun J B,Yang G F.Weld Joining,2007; (2):7(刘会杰,潘庆,孔庆伟,唐旭东,苏琳,李学军,孙静波,杨国锋.焊接,2007;(2):17) |
| [15] | Wang J H,Yao S,Wei L W,Qi X H.Trans Chin Weld Inst,2000; 21(4):61(汪建华,姚舜,魏良武,戚新海.焊接学报,2000;21(4):61) |
| [16] | Wang D Y,Feng J C,Wang P F.Trans Chin Weld Inst,2005; 26(3):25(王大勇,冯吉才,王攀峰.焊接学报,2005;26(3):25) |
| [17] | Han X H,Wang X J.Electron Weld Mach,2006; 36(11):48(韩晓辉,王希靖.电焊机,2006;36(11):48) |
| [18] | Zhang Z,Zhang H W.Int J Adv Manuf Technol,DOI:10.1007/s00170-007-0971-6 |
| [19] | Zhao Y H,Lin S B,He Z Q,Wu L.Sci Technol Weld Joining,2006; 11:178 |
| [20] | Schmidt H,Hattel J.ModeU Simul Mater Sci Eng,2005;13:77 |
| [21] | Buffa G,Hua J,Shivpuri R,Fratini L.Mater Sei Eng,2006; A419:389 |
| [22] | Dong P,Lu F,Hong J K,Cao Z.Sci Technal Weld Join-ing,2001; 6:281 |
| [23] | Bastier A,Maitournam M H,Dang Van K,Roger F.Sci Technol Weld Joining,2006; 11:278 |
| [24] | Zhang H W,Zhang Z.J Mater Sci Technol,2007; 23:73 |
| [25] | HKS Co.Ltd.ABAQUS User Manual.Version 6.4,2003 |
| [26] | Guerra M,Schmidt C,McClure J C,Murr L E,Nunes A C.Mater Charact,2003; 49:95 |
| [27] | Zhang H W,Zhang Z.In:Hu P,Reddy J N,eds.,Int Conf on Enhancement and Promotion of Computational Meth-ods in Engineering Science and Mechanics,Changchun:Jinlin University press,2006:52 |
| [28] | Zhang Z,Zhang H W.Aeta MetaU Sin,2006; 42:998(张昭,张洪武.金属学报,2006;42:998) |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%