镍基GH761合金热模拟压缩实验表明,当变形温度Td一定时,随应变速率ε的降低,变形峰值应力σp和稳态流动开始应力σs日及与它们对应的应变εp和εs均降低;当应变速率一定时,随Td的升高,σp和σs以及εs均降低,但εp基本不变.细化原始晶粒可提高再结晶形核率,在此基础上降低变形温度和提高变形速率是细化最终晶粒的重要途径.当应变达到完全再结晶时,合金具有最均匀且细小的组织;超过这一应变值,晶粒开始长大.GH761合金的热变形本构方程为:ε=6.5×106σp4.86exp(-461×103/RT).
参考文献
| [1] | Wang L A,Manufacturing Engineering for Hard Wrought Alloy Forgings.Beijing:National Defence Industry Press,2005:28(王乐安.难变形合金锻件生产技术.北京:国防工业出版社,2005:28) |
| [2] | Li C G,Zeng F c.Aeronaut Sci Technol,1996;(5):32(李成功,曾凡昌.航空科学技术,1996;(5):32) |
| [3] | Li Q,Han Y F,Xiao C B,Song J X.Mater Rev,2004;18(4):9(李青,韩雅芳,肖程波,宋尽霞.材料导报,2004;18(4):3) |
| [4] | Wang S Y,Li H Q,Li H Z,Ji C,Cui J.Chin J Rare Met,2003;27:452(王淑云,李惠曲,李辉中,计晟,崔健.稀有金属,2003;27:452) |
| [5] | Long Z D,Ma P L,Zhong Z Y.J Iron Steel Res,1996;8(2):31(龙正东,马培力,仲增墉.钢铁研究学报,1996;8(2):31) |
| [6] | Ducki K J,Rodak K,Hetmaficzyk M,Kuc D.Mater Chem Phys,2003;81:493 |
| [7] | Park N K,Kim I S,Na Y S,Yeom J T.J Mater Process Technol.2001:111:98 |
| [8] | Ha T K,Jung J Y.Mater Sci Eng,2007;A449-451:139 |
| [9] | Hardwick D,McTegart W J.J lnst Met,1961-62;90:17 |
| [10] | Yuan H,Liu W C.Mater Sci Eng,2005;A408:281 |
| [11] | Kupka M,Prewendowski M.J Alloys Compd,2007;437:367 |
| [12] | Lyszkowski R,Bystrzycki J.Intermetallics,2006;14:1231 |
| [13] | Imayev R,Evangelista E,Tassa O,Stobrawa J.Mater Sci Eng,1995;A202:128 |
| [14] | Zhou L X,Baker T N.Mater Sci Eng,1995;A196:89 |
| [15] | Zhou L X,Baker T N.Mater Sci Eng,1994;A177:1 |
| [16] | Roberts W,Boden H,Ahlblom B.Met Sci,1979;13:195 |
| [17] | Sellars C M,McTegart W J.Acta Metall,1966;14:1136 |
| [18] | McQaeen H J,Ryan N D.Mater Sci Eng,2002;A322:43 |
| [19] | Medeiros S C,Prasad Y V R K,Frazier W G,Srinivasan R.Mater Sci Eng,2000;A293:198 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%