合金材料在超高周疲劳下具有与低周和高周疲劳不同的裂纹萌生和扩展行为以及不同的S-N曲线特征.材料的强度、循环加载的频率、所处的环境等都显著影响超高周疲劳的特性.本文综述了合金材料超高周疲劳行为的基本特征和影响因素的研究进展.
The research on very-high-cycle fatigue(VHCF)of metallic materials has become a new horizon in the field of metal research since 1980s.The behaviors of crack initiation and propagation,and the characteristics of S-N curve for metallic materials in the VHCF regrime all differ from those in the loW cycle and high cycle fatigue regimes.For VHCF,the cyclic stress is below the level of conventional fatigue 1imit and the crack initiation tends to shift from surface to interior.The defects of material,including inclusions,grain-boundary,phase interface and other miero-inhomogeneities may become interior crack initiation site.The S-N curve containing VHCF regime may present"duplex"or "step-wise"shape.The behaviors of VHCF for metallic materials are substantially affected by the strength of material,loading frequency,loading environment,etc.This paper attempts to review the research progress of essential characteristics and influential factors for VHCF behavior of metallic materials.In addition,the aspects for further research on VHCF of metallic materials are proposed,which are the process and mechanism of fatigue crack initiation and early growth,the effects of loading frequencv and the environment on VHCF property,and development of quantitative model for VHCF.
参考文献
| [1] | Wohler A.Engineering,1867;2:160 |
| [2] | ASTM Standard E468--90,Annual Book of ASTM Start-dards 2006,Section 3,vol.03.01,2006:556 |
| [3] | Kikukawa M,Ohji K,Ognra K.J Basic Eng,1965;87D:857 |
| [4] | Naito T,Ueda H,Kikuchi M.J Soc Mater Sci Jpn,1983;32:1162 |
| [5] | Naito T,Ueda H,Kikuchi M.Metall Mater Trabs,1984;15A:1431 |
| [6] | Takeuchi E,Furuya Y,Nagashima N,Matsuoka S.Fatigue Fract Eng Mater Struet,2008;31:599 |
| [7] | Ranc N,Wagner D,Paris P C.Acta Mater,2008;56:4012 |
| [8] | Marines-Garcia I,Paris P C,Tada H,Bathias C,Lados D.Eng Fract Mech,2008:75:1657 |
| [9] | Liu Y B,Yang Z G,Li Y D,Chen S M,Li S X,Hui W J,Weng Y Q.Mater Sci Eng,2008;A497:408 |
| [10] | Domingnez A G M.Mech Mater,2008;40:636 |
| [11] | Makino T.Int J Fatigue,2008;30:1409 |
| [12] | Akiniwa Y,Stanzl-Tschegg S,Mayer H,Wakita M,Tanaka K.Int J Fatigue,2008;30:2057 |
| [13] | Sohar C R,Betzwar-Kotas A,Gierl C,Weiss B,Danninger H.Int J Fatigue,2008;30:1137 |
| [14] | Stanzl S E,Tschegg E K,Mayer H.Int J Fatigue,1986;8:195 |
| [15] | Lukas P,Kunz L.Fatigue Fract Eng Mater Struct,2002;25:747 |
| [16] | Murakarni Y,Yokoyama N N,Nagata J.Fatigue Fract Eng Mater Struct,2002;25:735 |
| [17] | Bathias C,Paris P C.Gigacycle Fatigue in Mechanical Practice.New York:Marcel Dekker.2005:1 |
| [18] | Murakami Y,Nomoto T,Ueda T,Murakami Y.Fatigue Fract Eng Mater Struct,2000;23:903 |
| [19] | Murakami Y,Nomoto T,Ueda T,Murakami Y.Fatigue Fract Eng Mater Struct,2000;23:893 |
| [20] | Murakami Y,Nomoto T,Ueda T.Fatigue Fract Eng Mater Struct,1999;22:581 |
| [21] | Mughrabi H.Fatigue Fract Eng Mater Struet,1999;22:633 |
| [22] | Chapetti M D,Tagawa T,Miyata T.Mater Sei Eng,2003;A356:236 |
| [23] | Harlow D G,Wei R P,Sakai T,Oguma N.Int J Fatigue,2006;28:1479 |
| [24] | Shiozawa K,Lu L,Ishihara S.Fatigue Fract Eng Mater Struet,2001;24:781 |
| [25] | Sakai T,Sato Y,Ognma N.Fatigue Fract Eng Mater Struct,2002;25:765 |
| [26] | Zhou C E,Qian G A,Hong Y S.Key Eng Mater,2006;324-325:1113 |
| [27] | Wang Q Y,Berard J Y,Rathery S,Bathias C.Fatigue Fract Eng Mater Struct,1999;22:673 |
| [28] | Nishijima S,Kanazawa K.Fatigue Fract Eng Mater Struct,1999;22:601 |
| [29] | Shiozawa K,Lu L.Fatigue Fract Eng Mater Struct 2002;25:813 |
| [30] | Ochi Y,Matsumura T,Masaki K,Yoshida S.Fatigue Fract Eng Mater Struet,2002;25:823 |
| [31] | Takai K,Honma Y,Izutsu K,Nagumo M.J Jpn Inst Met,1996;60:1155 |
| [32] | Chapetti M D,Tagawa T,Miyata T.Mater Sci Eng,2003;A356:227 |
| [33] | Shiozawac K,Morii Y,Nishino S,Lu L.Int J Fatigue,2006;28:1521 |
| [34] | Yang Z G,Li S X,Liu Y B,Li Y D,Li G Y,Hlli W J,Weng Y Q.Int J Fatigue,2008;30:1016 |
| [35] | Umezawa O,Nagai K.Metall Mater Trans,1998;29A:809 |
| [36] | Chai G.Int J Fatigue,2006;28:1533 |
| [37] | Zhang J M,Li S X,Yang Z G,Li G Y,Hui W J,Weng YQ.Int J Fatigue,2007;29:765 |
| [38] | Bathias C.Fatigue Fract Eng Mater Struct,1999;22:559 |
| [39] | Zuo JH,Wang Z G,Han E H.Mater Sci Eng,2008;A473:147 |
| [40] | Yao W,Guo S.Int J Fatigue,2008;30:172 |
| [41] | Yang F,Yin S M,Li S X,Zhang Z F.Mater Sci Eng,2008;A491:131 |
| [42] | Zhou C.PhD Dissertation,Institute of Mechanics,Chi-nese Academy of Sciences.2005(周承恩.中国科学院力学研究所博士学位论文,2005) |
| [43] | Hong Y S,Qian G A,Zhou C E.Proc 12th Int Conf on Fract,Ottawa,2009(in press) |
| [44] | Asami K,Sugiyama Y.J Heat Treatment Tech Assoc,1985;25:147 |
| [45] | Abe T,Furuya Y,Matsuoka S.Fatigue Fract Eng Mater Struct,2004;27:159 |
| [46] | Sakai T,Sakai T,Okada K,Furuichi M,Nishikawa I,Sug-eta A.Int J Fatigue,2006;28:1486 |
| [47] | Qian G A,Hong Y S.Acta Metall Sin,2009;45(in press)(钱桂安,洪友士.金属学报,2009;45(待发表)) |
| [48] | Kobayashi H,Ebara R,Ogura A,Kondo Y,Hamaya S.In:Allison J E,Jones J W,Larsen J M,Ritchie R O eds.,Proc VHCF-4,Michigan:TMS,2007:319 |
| [49] | Hirukawa H,Furuya Y,Matsuoka S.JSME Int J Ser A-Solid Mech Mater Eng,2006;49:337 |
| [50] | Sakai T,Chen Q,Uchiyama A,Nakagawa A,Ohnaka T.In:Allison J E,Jones J W,Larsen J M,Ritchie R O eds.,Proc VHCF-4,Michigan:Learn·Network·Advance,TMS,2007:51 |
| [51] | Mayer H,Haydn W,SchuUer R,Issler S,Bacher-H(o)chst M.Int J Fatigue,2009;31:242 |
| [52] | Marines I,Dominguez G,Baudry G,Vittori J F,Rathery S,Doucet J P,Bathias C.Int J Fatigue,2003;25:1037 |
| [53] | Furuya Y,Matsuoka S.Metall Mater Trans,2002;33A:3421 |
| [54] | [641 Furuya Y,Matsuoka S.Metall Mater Trans,2004;35A:1715 |
| [55] | Wang H.PhD Dissertation,Southwest Jiaotong Univer-sity,Chengdu,2004(王弘,西南交通大学博士学位论文,成都,2004) |
| [56] | Furuya Y,Abe T,Matsuoka S.Fatigue Fract Eng Mater Struct,2003;26:641 |
| [57] | Wang Q Y,Berard J Y,Dubarre A,Baudry G,Rathery S,Bathias C.Fatigue Fract Eng Mater Struct,1999;22:667 |
| [58] | Bai B,Xu X,Yu Y,Cui W,Gu J.In:Allison J E,Jones J W,Larsen J M,Ritchie R O eds.,Proc VHCF-4,Michi-gan:Learn·Network·Advance,TMS,2007:107 |
| [59] | Zettl B,Stanzl-Tschegg S,Mayer H.In:Allison J E,Jones J W,Larsen J M,Ritchie R O eds.Proc VHCF-4,Michi-gan:Learn.Network.Advance,TMS,2007:123 |
| [60] | Yan G L.Master Thesis,Southwest Jiaotong University,Chengdu.2005(闫桂玲,西南交通大学硕士学位论文,成都,2005) |
| [61] | Bayraktar E,Garciaa I M,Bathias C.Int J Fatigue,2006;28:1590 |
| [62] | Li T,Liu Y J,Sriraman M R,Wang Q Y.In:Allison J E,Jones J W.Larflen J M,Ritchie R O eds.,Proc VHCF-4Michigan:Learn-Network-Advance,TMS,2007:247 |
| [63] | Wagner V,Ebel-Wolf B,Walther F,Eifler D.In:Alli-son J E,Jones J W,Larsen J M,Ritchie R O eds.,Proc VHCF-4.Michigan:Learn·Network·Advance,TMS,2007:137 |
| [64] | Zettl B,Mayer H,Ede C,Stanzl-Tschegg S.Int J Fatigue,2006;28:1583 |
| [65] | Marines-Garcia I,Paris P C,Tada H,Bathias C.Mater Sci Eng,2007;A468-470:120 |
| [66] | Kobayashi H,Todoroki A,Oomura T,Sano T,Takehana T.Int J Fatigue,2006;28:1633 |
| [67] | Zhang Z Y.Master Thesis,Southwest Jiaotong University,Chengdu,2007(张真源,西南交通大学硕士学位论文,成都,2007) |
| [68] | Nascimento M P,Sotma R C,Pigatin W L,Voorwald H J C.Int J Fatigue,2001;23:607 |
| [69] | Bathins C,Drouillac L,Le Francois P.Int J Fatigue,2001;23:S143 |
| [70] | Ebara R.Fatigue Fract Eng Mater Struct,2002;25:855 |
| [71] | Dieter G E.Engineering Design,New York:McGraw Hill,1983:377 |
| [72] | Marines I,Bin X,Bathias C.Int J Fatigue,2003;25:1101 |
| [73] | Furuya Y,Matsuoka S,Abe T,Yamaguchi K.Scr Mater,2002;46:157 |
| [74] | Liaw P K,Wang H,Jiang L,Wang B,Huang J Y,Kuo RC.Huang J G.Scr Mater,2000;42:389 |
| [75] | Laird C,Charsley P In:Wells J M,Buck O,Roth L D,Tien J K eds.,Ultrasonic Fatigue,Proc 1st Int Conf on Fatigue and Corrosion Fatigue up to Ultrasonic Frequen-cies.Philadelphia:The Metallurgical Society of the Amet-ican Institute of Mining,Metallurgical and Petroleum En-giseers(AIME),1982:187 |
| [76] | Buchinger L,Stanzl S,Laird C.Philos Mag,1984;50A:275 |
| [77] | Buchinger L,Stanzl S,Laird C.Philos Mag,1990;62A:633 |
| [78] | Basinski Z S,Korbei A S,Basinski S J.Acta Metall,1980;28:191 |
| [79] | Mughrabi H.Acta Metall,1983;31:1367 |
| [80] | Mughrabi H.Mater Sci Eng,1978;33:207 |
| [81] | Roth L D,Willertz L E,Leax T R.In:Wells J M,BuckO,Roth L D,Tien J K eds.,Ultrasonic Fatigue,Proc 1st Int Conf on Fatigue and Corrosion Fatigue up to Ultra-sonic Frequencies,Philadelphia:The Metallurgical Soci-ety of the American Institute of Mining,Metallurgical and Petroleum Engineers(AIME),1982:265 |
| [82] | Taylor D,Knott JF.In:Prac 6th Int Conf Fracture,New Delhi:Pergamon Press.1984;3:1759 |
| [83] | Lukas P,Kunz L,Knesl Z,Weiss B,Stickler R.Mater Sci Eng,1985;70:91 |
| [84] | Meininger J M,Gibeling J C.Metall Trans,1992;23A:3077 |
| [85] | Papakyriacou M,Mayer H,Pypen C,Plenk H Jr,Stanzl-Tschegg S.Mater Sci Eng,2001;A308:143 |
| [86] | Haberz K,Pippan R,Stuwe H P.In:Bailon J P,Dick-son J I eds..Proc of the 5th Int Conf on Fatigue and Fatigue Thresholds,Montreal:Engineering Materials Ad-visory Services(EMAS)Publishing,1993:525 |
| [87] | Stanzl S E.J soc Environ Eng,1986;25:11 |
| [88] | Sakamoto H,Saiki H.Eng Fract Mech,1994;49:317 |
| [89] | Sakamoto H,Takezono S.Eng Fract Mech,1988;31:463 |
| [90] | Ybkobori T,Sato K.Eng Fract Mech,1976;8:81 |
| [91] | Holper B,Mayer H,Vasudevan A K,Stanzl-Tschegg S E.Int J Fatigue.2003:25:397 |
| [92] | Holper B,Mayer H,Vasudevan A K,Stanzl-Tschegg S E.Int J Fatigue.2004;26:27 |
| [93] | shih Y S,Chen J J.Nucl Eng Design,1999;191:225 |
| [94] | Baik Y M,Kim K S.Int J Fatigue,2001;23:417 |
| [95] | Makhlouf K,Jones J W.Int J Fatigue,1993;15:163 |
| [96] | Stanzl S E,Tschegg E K.In:Lewis J C,Sines G eds.,Fracture Mechanics:14th Symposium Vol Ⅱ:Testing and Applications,ASTM STP 791、Philadelphia:American Society for Te8ting and Materiahs.1983:3 |
| [97] | Hoffelner W.In:Wells J M,Buck O,Roth L D,Tien J K eds.,Ultrasonic Fatigue,Proc 1st Int Conf on Fatigue and Corrosion Fatigue up to Ultrasonic Frequencies,Philadel-phia:The Metallurgical Society of the American Insti-tute of Mining,Metallurgical and Petroleunl Engineers (AIME),1982:461 |
| [98] | Boyce B L,Ritchie R O.Eng Fract Mech,2001;68:129 |
| [99] | Ni J G.J Aerospace Power,1995;10:245(倪金刚.航空动力学报,1995;10:245) |
| [100] | Marines I,Dominguez G,Baudry G,Vittori J F,Rathery S,Doucet J P,Bathias C.Int J Fatigue.2003;25:1037 |
| [101] | Nakajima M,Tokaji K,Itoga H,Ko H N.Fatigue Fract Eng Mater Struct,2003;26:1113 |
| [102] | Tokaji K,Ko H N,Nakajima M,Itoga H.Mater Sci Eng,2003;A345:197 |
| [103] | Petit J,Sarrazin-Baudoux C.Int J Fatigue,2006;28:1471 |
| [104] | Stanzl-Tschegg S E.Fatigue Fract Eng Mater Struct,1999;22:567 |
| [105] | Ebara R.Int J Fatigue,2006;28:1465 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%