通过改装毛细管流变仪建立了专门的实验装置,研究高温高压下熔体在纤维床层中的流动行为.采用一维恒压流动实验分别测量了不饱和及饱和流动状况下玻纤毡厚度方向聚丙烯熔体的渗透率,考察了玻纤毡空隙率、单丝直径、针刺等几何结构对渗透率的影响.根据实验结果进一步讨论了GMT片材熔融浸渍过程中的气泡形成以及浸渍工艺参数的选择.
参考文献
| [1] | Bigg D M. Processing characteristic of thermoplastic sheet composites[J]. Intern Polymer Processing, 1992, Ⅶ(2): 172-185 . |
| [2] | Wang X M, Mayer C, Neitzel M.Some issues on impregnation in manufacturing of thermoplastic composites by using a double belt press[J].Polym Comp, 1997,18(6): 701-710. |
| [3] | Mayer C, Wang X M, Neitzel M. Macro- and micro-impregnation phenomena in continuous manufacturing of fabric reinforced thermoplastic composites[J].Composites,1998,29(7),783-793. |
| [4] | Luce T L, et al.Permeability characterization Part 2:Flow behavior in multiple-layer preforms[J]. Polym Comp, 1995, 16(6): 446-458. |
| [5] | Lai Y, Khomami B, Kardos J L. Accurate permeability characterization of preforms used in polymer matrix composite fabrication processes[J]. Polym Comp, 1997,18(3):368-377. |
| [6] | Rohatgi V, Patel N, Lee J L. Experimental investigation of flow-induced microvoids during impregnation of unidirectional stitched fiberglass mat[J].Polym Comp, 1996, 17(2): 161-170. |
| [7] | Parnas R S, Flynn K M, Dal-Favero M E. A permeability database for composites manufacturing[J]. Polym Comp, 1997,18(5): 623-633. |
| [8] | Cogswell F N. Polymer melt rheology[M].London:George Godwin Limited,1981. |
| [9] | Skartsis L, Khomami B, Kardos J L.Polymeric flow through fibrous media[J]. J Rheol, 1992, 36(4): 589-620. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%