复合材料的固化有着复杂的内部过程,传统的工艺条件难以保障产品的质量,发展智能化的在线监控技术是个有效途径,在线监控系统需要有先进的传感器.研制了一种新型光纤传感器,提出通过测量光纤末端近场模斑谱反映光纤埋置周围树脂折射率的变化.给出了利用这种传感器进行复合材料固化监测的实验结果.发现这种光纤传感器的信号能反映固化凝胶点、固化结束点及树脂粘度的最低点,又由于光纤与复合材料的兼容性好以及装置简单、廉价、可靠性高,因此可以应用于复合材料固化过程的在线监控系统.
参考文献
[1] | Ciriscioli P R,Springer G S.Smart autoclave cure of composites[M].Lancaster: Tech Pub Co Inc,1990. |
[2] | Kline, Ronald A, Altan Cengiz M, The intelligent processing of laminated composite materials[A]. Ceramic matrix composites and other systems. Vol.Ⅱ[C].Proceedings of the Ninth International Conference on Composite Materials, Madrid, Spain.1993.441-448. |
[3] | Milkovich S M.In situ sensors for intelligent process control for fabrication of polymer-matrix composite materials[J].SPIE,1994,2191:349-358. |
[4] | Lou K A. Combined sensor system for process and in-service health monitoring of composite structures[J]. SPIE,1994,2191:32-45. |
[5] | Udd Eric.Overview of fiber optic smart structure for aerospace application[J].SPIE,1988,986:2-5. |
[6] | Udd Eric.Fiber optic sensor overview[A]. In:(Eric Udd ed.)Fiber Optic Smart structures[C]. John Wiley & Sons Inc, 1994. 155-170. |
[7] | Rawson E G,Goodman J W,Norton R E.Frequency dependence of modal noise in multimode optical fibers[J]. J Opt Soc Am, 1980,70(8):968-976. |
[8] | Afromowitz M A.Fiber optic polymer cure sensor[J]. J of Lightwave Technology, 1988,6(10):1591-1598. |
[9] | 张博明.埋多功能光纤传感器智能材料与结构的研究[D].哈尔滨:哈尔滨工业大学,1998.55,10\|11. |
[10] | Ciriscioli P R, Springer G S.Dielectric cure monitoring-A critical review[J].SAMPE Journal,1989,25:35-42. |
[11] | 李玉华. 动态介电法在航空结构制造工艺参数制定中的应用[A].第九届全国复合材料会议论文集(下)[C].1996. 555-560. |
[12] | 张博明,王殿富,杜善义,等.多功能光纤智能复合材料研究[J].复合材料学报,2000,17(1):37-41. |
[13] | Ciriscioli P R, Springer G S.An expert system for autoclave curing of composite[J]. Journal of Composite Materials,1991,25:1542-1587. |
[14] | 张博明.智能复合材料中光纤与基体的相容性的研究[J].功能材料,1998,29(3):240-245. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%