复合材料由于其优良的性能而拥有广泛的应用领域,但其成型工艺复杂,成本高使其应用受到限制.针对成型过程开发智能化技术是提高生产效率和产品质量的有效手段,其中包括建立数学模型,以专家系统、神经网络或分步预测优化的模型系统为中心的在线监控系统.本文作者针对这些智能化工艺技术进行了总结分类和比较,对智能成型工艺系统进行了阐述,包括其功能、结构和辅助部件.分析了关于复合材料智能化生产技术的发展方向和社会效益.
参考文献
| [1] | Springer G S, Keynote J, Address R.The Role of Models in Manufacturing Thermosetting and Thermoplastic Matrix Composites [A]. In Proceedings of Mannfacturing International, Ⅵ [C]. Atlanta, GA.1998,2(88):1-5. |
| [2] | Martinez G M.Fast cures for thick laminated organic matrix composites [J].Chem Eng Sci,1991,46(2):439-450. |
| [3] | LeClair S R, Abrams F L.Qualitative Process Automation [A].Proceedings of the 27th IEEE Conference on Decision and Control [C].Austin,TX, 1988:197-209. |
| [4] | Ciriscioli P R, Springer G S, Wang Q.An Expert System for Controlling Autoclave Temperature,in Tomorrows Materials Today [A].Proceedings of the 34th International SAMPE Symposium [C].Reno, NY,1989: 205-220. |
| [5] | Kalra L, Perry M J, Lee L J. Automation of autoclave cure of graphite-epoxy composites [J]. Journal of Composite Materials, 1992,26(10):2567-2584. |
| [6] | Manzini R A, Roehl E A.Flexible Control of an Organic Matrix Composite Cure Process Using Object-Oriented Control Concepts [A].Proceedings of the American Control Conference(IEEE Cat.Number 90CH2896-9) [C].1990:1980-1985. |
| [7] | Wu H T, Joseph B.A blackboard architecture for model-based reased reasoning and plan refinement in real-time process control [J].Cltem Eng Sci,1992,47(4):917-928. |
| [8] | Bogetti T A, Gillespie J W. Process-induced stress and deformation in thick section thermoset composite laminates [J].Journal of Composite Materials,1992, 26(5):626-660. |
| [9] | Pillal V, Antony N, Dhurjatj P. Intelligent curing of thick composites using a knowledge-based system [J].Journal of Composite Materials,1997, 31(1):22-51. |
| [10] | Dementyev V S, Petuhov M, Torkunov A.On the Optimization of the Fiber Reinforced Composites Manufacturing Process with Two pressure Steps [A].In CADCOMP92-3rd International Conference on Copmuter-Aided Design in Composite Material Technology [C]. 1992: 37-47. |
| [11] | Pillai V.Use of Simulations in Optintzation of and Design of Knowledgc Based Control System for a Composites Fabrication [A].In CADCOMP92-3rd International Conference on Computer Aided Design in Composite Material Technology [C]. Newark.DE, 1992:529-544. |
| [12] | Kardos J L, Dudukovic J P, Mckague E L, Lehman M W.Void Formation and Transport during Composite Assurance and Processing [A].In Composite Materials, Quality Assurance and Processing, C E [C]. Browning ed, ASTM STP 797,1983:96-109. [14] Jeenson S. Optimal Cure Cycle Design of Resin-Fiber Composite Laminate [D].Master's thesis. Old Dominion University.1986:8-13.[15] Kenny J M.Integration of Processing Models with Control and Optimization of Polymer Composites Fabrication [A].In CADCOMP92-3rd International Conference on Computer Aided Design in Composite Material Technology [C].Newark. DE,1992:529-544. [16] Tam A S, Gutowski T G.A Nonlinear Process Controller for Curing a Thermoset Composite,in Tomorrow's Materials:Today [A].Proceedings of the 34th International SAMPE Symposium [C].Reno. |
| [13] | Nagendra S, Loos A C.Optimization of the Curing Process of Filament Wound Composites, in Tomorrow's Materials:Today [A].Process of the 34th International SAMPE Symposium [C].Reno.NV,1989:1853-1867. |
| [14] | Bogtti Ta, Gillespoe Jr J W.Two-dimensional cure simulation of thick thermosetting composites [J]. Journal of Composite Materials,1991, 25(3):239-273. |
| [15] | Pillai V K, Bris A N, Dhuujati P.Heuristics Guided Optimization of a Batch Autoclave Curing Process [J].Comp Chem Eng in Press,1995:27-32. |
| [16] | Johnson S A, Robrets N K.Production Implementation of Fully Automated Closed Loop Cure Control for Advanced Composite Structures [A].In Proceedings of the 34th International SAMPE Symposium [C].Reno. NV,1989:373-384. |
| [17] | Joseph R, Frieda W, Hanratty G.Predictive control of quality in a batch manufacturing process using artificial neural network models [J]. Industrial and Engineering Chemistry Research,1993, 32(9):1951-1961. |
| [18] | Pillai V A, Beris N, Dhurjati P.Implementation of model-based optimal temperature profiles for autoclave curing of composites using a knowledge-based system [J].Ind Eng Chem Res,1994,33(10):2443-2452. |
| [19] | 梁滨, 马蕊然.中温固化环氧树脂体系的研究 [J].复合材料学报,1993, 10(2): 85-88. |
| [20] | 周志强, 何平笙,吴人洁.非收缩共聚环氧树脂基体固化的反应动力学 [J].高分子材料科学与工程,1990, 7(4):13-19. |
| [21] | 李玉华.QY8911-Ⅲ高韧性双玛来酰亚胺树脂固化工艺规范的研究 [J].化学世界,1996,37(7):249-251. |
| [22] | Wang A, Lee S Y.Sapphire-fiber-based intrinsic fabry-perot interferometer [J].Optic Letter,1992,17(14):1021-1023. |
| [23] | Ram L, Levy G, Scott D, Schwab R.Fluorescence optrode sensors for composite processing control and smart structure applications [A].Fiber Optic Smart structures(Eric Udd ed) [C].John Wiley & Sons, Inc.1994:361-372. |
| [24] | Lam K Y, Afromowitz M A.Fiber-optic epoxy composite cure sensor,I: Dependence of refractive index of an autocatalytic reaction epoxy system at 850 nm on temperature and extent of cure [J].Applied Optics,1995,34(9):5635-5638. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%