真空注射成型工艺是一种新型的复合材料液体模塑成型工艺,对沟槽型真空注射成型工艺开展了实验研究,通过充模实验确定了引流槽的宽度、深度和槽间距及主槽的槽间距等工艺参数并进行了优化;对影响充模过程的各种因素进行了详细的讨论,并以夹芯面板的制作实例阐述了沟槽型真空注射成型的工艺过程.
参考文献
| [1] | Kosmatka, John B, Hornbeck, et al. Overview of the development of the ARPA/BIR composite assault bridge [J].International SAMPE Technical Conference, 1996, 28(4-en, 8): 1228-1239. |
| [2] | Pike T, McArthur M, Schade D. Vacuum assisted resin transfer molding of a layered structural laminate for application on ground combat vehicles [J]. International SAMPE Technical Conference, 1996, 28(4-7):374-380. |
| [3] | Lewit, Scott M, Jakubowski, et al. Low cost VARTM process for commercial and military applications [J]. International SAMPE Symposium and Exhibition (Proceedings), 1997, 42(2):1173-1187. |
| [4] | Andersson M, Lundstron S, Gebart B R, et al. Development of guidelines for the vacuum infusion process [A]. ln:Proceedings of FRP [C]. 2000. |
| [5] | 邓京兰, 祝颖丹, 王继辉. SCRIMP成型工艺的研究 [J]. 玻璃钢/复合材料,2001, 5: 40-43. |
| [6] | Rigas E J, Wanlsh S M, William A S. Development of a novel processing technique for vacuum assisted resin transfer molding (VARTM) [A]. ln: SAMPLE [C]. 2001. 1086. |
| [7] | Hammami A, Gebart B R.Experimental investigation of the vacuum infusion process [A]. ln: Proceedings of ECCM-8 [C]. 1998. |
| [8] | Lacy G E, Eng P. Gall B B. Fabrication of a large FRP deck with longitudinal and transverse stiffeners in a single infusion [J]. Composites, 2000, 27-30:141-149. |
| [9] | Hoebergen A, Van H E, Labordus M. Practical injection strategies using vacuum injection techniques for boat building [A]. ln: IWOMS 99: Third International Workshop on Materials Science, Part Ⅱ--Trends in Materials Science and Technology [C]. 1999.721-726. |
| [10] | 祝颖丹, 李新华, 王继辉, 等. 高渗透介质型真空注射成型工艺的研究. 复合材料学报,2003,20(4): 136-140. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%