真空注射成型工艺是一种制备大型、几何形状复杂构件的复合材料液体模塑成型新技术,对高渗透介质型真空注射成型工艺开展了实验研究,通过可视化实验优选出了较好的高渗透介质,对影响充模过程的各种因素进行了详细的讨论,并以模型船制作为实例描述了高渗透介质型真空注射工艺的成型过程.
参考文献
| [1] | Kosmatka, John B, Hornbeck, et al. Overview of the Development of the ARPA/BIR Composite Assault Bridge [J]. International SAMPE Technical Conference, 1996, 28(4-en, 8): 1228-1239. |
| [2] | Lewit, Scott M, Jakubowski, et al. Low cost VARTM process for commercial and military applications [J]. International SAMPE Symposium and Exhibition (Proceedings), 1997, 42(2):1173-1187. |
| [3] | Pike T, McArthur M, Schade D. Vacuum assisted resin transfer molding of a layered structural laminate for application on ground combat vehicles [J]. International SAMPE Technical Conference, 1996, 28(4-7):374-380. |
| [4] | Elias J. Rigas, Shawn M. Walsh, William A. Spurgeon. Development of a novel processing technique for vacuum assisted resin transfer molding (VARTM) [A].In: SAMPLE [C]. 2001, 1086. |
| [5] | Andersson M, Lundstron S, Gebart B R,et al. Development of guidelines for the vacuum infusion process [A]. ln: Proceedings of FRP-2000 [C]. 2000. |
| [6] | Sun X D, Li S J, Lee L J. Mold filling analysis in vacuum-assisted resin transfer molding, Part Ⅰ: SCRIMP Based on High-Permeable Medium [J]. Polymer Composites, 1998,19(6):807-817. |
| [7] | Sun X D, Li S J, Lee L J. Mold filling analysis in vacuum-assisted resin transfer molding, Part Ⅱ: SCRIMP Based on High-Permeable Medium [J]. Plymer Composites, 1998,19(6):818-829. |
| [8] | Mathur R, Heider D, Hoffmann C, et al. Flow front measurements and model validation in the vacuum assisted resin transfer molding process [J]. Polym Compos, 2001,22(4):477-490. |
| [9] | Lacy G E, Eng P. Gall B B. Fabrication of a large FRP deck with longitudinal and transverse stiffeners in a single infusion [J]. Composites, 2000, 27-30:141-149. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%