基于电化学浸渗技术(ECI)在室温下制备了连续铜纤维、碳纤维和玻璃纤维增强铜基复合材料.实验结果表明,在本实验工艺条件下可获得致密的纤维/Cu基复合材料,并具有优良的力学性能.复合材料的断口形貌及显微结构的SEM观察表明,纤维与铜基体之间的界面结合良好,纤维不受任何损伤.证实了ECI在室温下快速制备纤维增强金属基复合材料的可行性.
参考文献
| [1] | 闵光辉,宋立,于化顺,等.高强度导电铜基复合材料[J].功能材料,1997,28(4):342-346. |
| [2] | 凤仪,应美芳,王成福,等.碳纤维含量对短碳纤维/铜复合材料性能的影响[J].复合材料学报,1994,11(1):37-41. |
| [3] | 万怡林,王玉林,李国俊,等.碳毡/铜复合材料的摩擦磨损特性研究[J].复合材料学报,1997,14(2):80-86. |
| [4] | Agbalyan S G,Petrosyan A S, Amalyan E S,et al. Powder metallurgy composite materials strengthened with fibers[J].Powder Metallurgy and Metal Ceramics,2001,40(11～12):595- 600. |
| [5] | Prakasan K,Seshan S.Microstructure and properties of squeeze cast Cu-carbon fiber metal matrix composite [J].Journal of Material Science,1999,34(20):5045-5049. |
| [6] | Zhang Z M,Wei K T.Interfaces in Metal-Ceramics Composites [M].New York: The Minerals,Metals and Materials Society,1989. 259. |
| [7] | 孙守金,张名大.用镀Cu-Fe碳纤维制备的铜基复合材料[J].材料工程,1991(1):21-24. |
| [8] | Zhu Z,Kuang X,Carotenuto G,et al.Nicolais L.Fabrication and properties of carbon fibre-reinforced copper composite by controlled three-step electrodeposition [J].J of Mater Sci,1997,32:1061-1067. |
| [9] | Tsakova V, Borissov D. Electrochemical deposition of copper in polyaniline film number density and spatial distribution of deposited metal clusters [J].Electrochemistry Communications,2000, 2(7) :511- 515. |
| [10] | Ortona A, Donato A, Filacchioni G, et al. SiC-SiCf, CMC manufacturing by hybrid CVI-PIP techniques: Process optimisation [J]. Fusion Engineering and Design, 2000,51 ～ 52:159-163. |
| [11] | Davies I J, Rawlings R D. Mechanical properties in compression of CVI densified porous carbon/carbon composite [J].Composites Science and Technology,1999,59(1):97-104. |
| [12] | Stankovic V D,Gojo M. Electrodeposited composite coatings of copper with inert,semiconductive and conductive particles [J].Surface and Coatings Technology,1996,81: 225-232 . |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%