采用溶液混合法制备PZT/PVDF压电复合材料.首先用水热法制备出适合溶液混合的PZT陶瓷粉末,并根据陶瓷粉末对PVDF的吸收量,选择乙醇作为PVDF的溶剂进行混合,然后烘干制备PZT/PVDF复合粉末,再成型极化.实验结果表明,这种复合方法提高了PZT陶瓷颗粒在PVDF有机基体中的分散度,使材料内部均匀,结构致密,从而提高了PZT/PVDF压电复合材料的压电和介电性能.
参考文献
[1] | 李小兵,田莳,张跃. 0-3型压电陶瓷/聚合物复合材料的制备工艺新进展[J]. 功能材料,2001,32(4):356-358. |
[2] | 李小兵,田莳,李宏波. PZN-PZT压电陶瓷及其PVDF压电复合材料的制备和性能[J]. 复合材料学报,2002,19(3):70-74. |
[3] | 王树彬,徐延献,韩杰才,等. PZT/PVDF压电复合材料的制备及其性能研究[J]. 复合材料学报, 2000, 17(4):1-5. |
[4] | 严继康,张建成,吴文彪,等.工艺对0-3复合材料介电和压电性能的影响[J]. 上海大学学报(自然科学版),1999,5(2):119-122. |
[5] | Cheng H,Ma J, Zhu B,et al. Reaction mechanisms in the formation of lead zirconate titanate solid solution under hydrothermal condion[J]. J Am Ceram,1993,76(3): 625-629. |
[6] | Kwonhoon A S,Riman R E.Colloidal processing for improved piezoelectric properties of flexible 0-3 ceramic-polymer composites[J]. J Am Ceram Soc,1991,74(7): 1699-1703. |
[7] | Duscha K J. Effects of Mn doping on (Pb,Bi)(Tix(Fe1-x)O3/polymer 0-3 composite for hydrophone application[D].Philadelphia:The Pennsylvania State university, State College,1986.34-38. |
[8] | Hank K H, Riman R E,Safari A. Dielectric and piezoelectric properties of flexible 0-3 piezoelectric composite prepared with co-precipitated (Pb0.5Bi0.5)(Ti0.5(Fe1-xMnx)0.5)O3 ceramic powders[A].In:Davison L W, ed.International Symposium on Application of Ferroelectrics[C].Amsterdam:Elsevier Science Publishers,1987.985-987. |
[9] | Safari A, Lee Y H, Halliyal A, et al.Poling of flexible piezo-electric composite[J]. Ferroelectrics Lett,1986,131(5): 345-349. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%