以硫铝酸盐水泥为基体,铌镁锆钛酸铅(PMN)陶瓷颗粒为功能体制备了水泥基压电复合材料.重点讨论了复合材料的介电性能和压电性能.结果表明:水泥基压电复合材料的介电温谱在-30℃~150℃范围内较平坦,表现出优良的介电温度稳定性,而介电损耗随着温度的升高而增加;水泥基压电复合材料的压电应变常数和介电常数均随着PMN含量的增加而增大.
参考文献
[1] | 黄世峰,徐荣华,刘福田,等.水泥基功能复合材料研究进展及应用[J]. 硅酸盐通报,2003,22(4):58 -63.Huang Shifen, Xu Ronghua, Liu Futian, et al. Development and application of cement-based functional composite[J].Bulletin of Chinese Ceramic Society, 2003,22(4): 58-63. |
[2] | 张东,吴科如,李宗津.水泥基压电机敏复合材料的可行性分析和研究[J].建筑材料学报,2002,5(2):141-146.Zhang Dong, Wu Keru,Li Zongjin. Feasibility study of cement based piezoelectric smart composites[J].Journal of Building Materials,2002,5(2): 141-146. |
[3] | Li Z J, Zhang D, Wu K R. Cement-based 0-3 piezoelectric composites[J]. Journal of American Ceramic Society,2002,85(2):305-313. |
[4] | 黄世峰, 常钧,程新,等. 0-3型压电陶瓷-硫铝酸盐水泥复合材料的压电性能[J].复合材料学报,2004,21(3):73-78.Huang Shifeng,Chang Jun,Cheng Xin,et al. Piezoelectric properties of 0-3 sulphoaluminate cement-based piezoelectric composites [J]. Acta Materiae Compositae Sinica, 2004,21(3): 73-78. |
[5] | Huang S F, Chang J, Cheng X. Piezoelectric properties of 0-3 PZT/Sulphoaluminate cement composites[J]. Smart Materials and Structures, 2004,13(2):270-274. |
[6] | IEEE Standard on Piezoelectricity[S].ANSI/IEEE Std 176-1987.New York:IEEE,1987. |
[7] | Tandon R P,Singh Ramadhar,Sinha R D P. Dielectric and piezoelectric behavior of lead titanate/polymer composites [J],Ferroelectrics,1991,120:293-297. |
[8] | Furukawa T,Ishida K,Fukada E. Piezoelectric properties in the composite systems of polymer and ceramics [J]. J Appl Phys,1979,50(7):4904-4907. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%