对国内外短纤维增强泡沫塑料力学行为的研究进展进行了综述.简要介绍了纤维增强泡沫塑料的制备方法和结构形态;重点报道了短纤维增强泡沫塑料力学行为的研究成果和作者的一些工作,其中包括纤维增强泡沫塑料拉压、弯剪基本力学性能、纤维增强机理和材料破坏机理、温度效应、纤维长度、纤维填充量和表面处理对力学行为的影响等.展望了未来的研究趋势.
参考文献
| [1] | Hilyard N C, ed. Mechanics of Cellular Plastics [M]. London: Applied Science Publisher, 1982. 323-356. |
| [2] | 闻荻江,陈再新,李国忠.玻璃纤维增强灌注型聚氨酯泡沫塑料的拉伸、压缩性能和破坏机理[J].复合材料学报,1999,16(4):64-67. |
| [3] | 方禹声,朱吕民,编著.聚氨酯泡沫塑料(第二版)[M].北京:化学工业出版社,1994.497. |
| [4] | 卢子兴,王仁,黄筑平,等.泡沫塑料力学性能研究综述[J].力学进展,1996,26(3):306-323. |
| [5] | 闻荻江,陈再新.增强泡沫塑料的特性和应用[J].玻璃钢/复合材料,1998(2):49-51. |
| [6] | 林桂,刘力,张建春,等.纤维增强聚合物发泡体的研究进展[J].中国塑料,2002,16(1):7-11. |
| [7] | 朱海静,杨伟,李忠明,等.玻纤增强硬质聚氨酯泡沫塑料研究进展[J].工程塑料应用,2003,31(7):62-64. |
| [8] | 卢子兴,李怀祥,田常津,等.不同载荷作用下泡沫塑料的变形和失效机理分析[J].塑料,1996,25(2):38-41. |
| [9] | 陈再新,闻荻江,李国忠.玻璃纤维增强灌注型聚氨酯泡沫塑料的微观结构和增强机理[J].高分子材料科学与工程,1999,15(5):102-104. |
| [10] | 王建华,芦艾,周秋明,等.高密度增强硬质聚氨酯泡沫塑料的复合泡体结构[J].中国塑料,2001,15(4):28-31. |
| [11] | Shen Hongbin, Nutt S, Hull D. Direct observation and mea surement of fiber architecture in short fiber-polymer composite foam through micro-CT imaging [J]. Composites Science and Technology, 2004, 64(13-14): 2113-2120. |
| [12] | Cotgreave T C, Shortall J B. The mechanism of reinforcement of polyurethane foam by high-modulus chopped fibers[J]. J Mater Sci, 1977, 12(4): 708-717. |
| [13] | Cotgreave T C, Shortall J B. The fracture toughness of reinforced polyurethane foam [J]. J Mater Sci, 1978, 13(4):722-730. |
| [14] | Morimoto K, Suzuki T, Yosomiya R, etal. Stress relaxation of glass-fiber-reinforced rigid polyurethane foam [J]. Polymer Engineering and Science, 1984, 24(12): 1000- 1005. |
| [15] | Morimoto K, Suzuki T. Adhesion between glass-fiber and matrix of glass-fiber reinforced rigid polyurethane foam under tension [J]. Polymer-Plastics Technology and Engineering, 1984, 22(1): 55-76. |
| [16] | Morimoto K, Toshio S, Yosomiya R, et al. Flexural properties of glass fiber reinforced rigid polyurethane foam [J]. Industrial and Engineering Chemistry, Product Research and Development, 1984, 23(1): 81-85. |
| [17] | Yosomiya R, Morimoto K. Compressive properties of glass fiber reinforced rigid polyurethane foam [J]. Industrial and Engineering Chemistry, Product Research and Development, 1984, 23(4): 605-608. |
| [18] | Yosomiya R, Morimoto K. Effect of interaction between fiber and matrix on impact properties of glass fiber reinforced rigid polyurethane foam [J]. Polymer-Plastics Technology and Engineering, 1985, 24(1): 11 26. |
| [19] | 卢子兴,高镇同,田常津,等.两种增强泡沫塑料静动态力学性能的比较[J].北京航空航天大学学报,1996,22(3):358-362. |
| [20] | 卢子兴,田常津,王仁.玻璃纤维增强聚氨酯泡沫塑料的压缩力学性能研究[J].实验力学,1995,10(1):45-50. |
| [21] | 卢子兴,王建华,谢若泽,等.增强聚氨酯泡沫塑料力学行为的研究[J].复合材料学报,1999,16(2):39-45. |
| [22] | 卢子兴,田常津,韩铭宝,等.聚氨酯泡沫塑料在应力波加载下的压缩力学性能研究[J].爆炸与冲击,1995,15(4):374-380. |
| [23] | 李国忠.玻璃纤维增强硬质聚氨酯泡沫塑料的微观结构及破坏机理研究[J].复合材料学报,1996,13(2):17-21. |
| [24] | 朱海静,杨伟,杨鸣波,等.增强硬质聚氨酯泡沫塑料的压缩破坏行为[J].高分子材料科学与工程,2003,19(4):133-143. |
| [25] | 张瑞珠.硬质聚氨酯泡沫塑料的力学特性[A].96中国材料研讨会论文集(材料设计与加工)[C].北京:化学工业出版社,1997.173-176. |
| [26] | 王伟力.RPU力学性能的实验分析[J].化工生产与技术,2002,9(1):21-25. |
| [27] | 林桂,张建春,张秀娟,等.短纤维对橡胶发泡复合材料增强机理的细观分析[J].橡胶工业,2004,51(1):5-13. |
| [28] | Shen Hongbin, Nutt S. Mechanical characterization of short fiber reinforced phenolic foam [J]. Composites Part A,2003, 34(9): 899-906. |
| [29] | Bledzki A K, Kurek K, Gassan J. Influence of micropores on the dynamic-mechanical properties on reinforced epoxy foams[J]. Journal of Materials Science, 1998, 33(12): 32073211. |
| [30] | 李国忠,于衍真.玻璃纤维对硬质聚氨酯泡沫塑料增强机理的探讨[J].高分子材料科学与工程,1997,13(4):130-133. |
| [31] | 许鑫华,方洞浦,陈贻瑞,等.纤维增强环氧发泡复合材料的研究[J].化学工业与工程,1997,14(1):36-40. |
| [32] | 乌云其其格.偶联剂对玻璃纤维增强塑料的界面作用[J].玻璃钢/复合材料,2000(4):12-15. |
| [33] | 徐涛,王建华,傅强,等.玻纤增强聚氨酯泡沫塑料界面形成特性及对其力学性能的影响[J].含能材料,2002,10(2):84-87. |
| [34] | 王建华,芦艾,周秋明,等.短切玻璃纤维增强硬质聚氨酯泡沫塑料的压缩性能[J].高分子材料科学与工程,2001,17(3):150-156. |
| [35] | Gupta'N, Karthikeyan C S, Sankaran S, et al. Correlation of processing methodology to the physical and mechanical prop erties of syntactic foams with and without fibers [J]. Mater Characterization, 1999, 43(4): 271-277. |
| [36] | Karthikeyan C S, Sankaran S, Kumar N J, et al. Processing and compressive strengths of syntactic foams with and with out fibrous reinforcements [J]. J Appl Polym Sci, 2001,81(2): 405-411. |
| [37] | Karthikeyan C S, Sankaran S, Kishore. Elastic behaviour of plain and fibre-reinforced syntactic foams under compression[J]. Materials Letters, 2004, 58(6): 995-999. |
| [38] | Karthikeyan C S, Kishore, Sankaran S. Effect of absorption in aqueous and hygrothermal media on the compressive properties of glass fiber reinforced syntactic foam [J]. Journal of Reinforced Plastics and Composites, 2001, 20(11): 982-993. |
| [39] | 管云林,刟蕾,刘晓非.纤维素纤维增强聚氨酯/酚醛环氧树脂互穿网络硬质泡沫塑料的研究[J].中国塑料,1996,10(5):31-35. |
| [40] | Bledzki A K, Gasson J, Zhang W Y. Impact properties of natural fiber-reinforced epoxy foams [J]. Journal of Cellular Plastics, 1999, 35(6): 550-562. |
| [41] | Stokke D D, Shaler S M, Hawke R N. Modification of polyurethane foams with cellulose fibers[J]. SAMPE Quarterly,1992, 23(4): 58-66. |
| [42] | Matuana L M, Park C B, Balatinecz J J. Effect of cell morphology on the properties of microcellular foamed PVC/wood fiber composites [A]. Proceedings of the 1996 ASME Inter national Mechanical Engineering Congress and Exposition[C]. New York: ASME, 1996, 76: 1-16. |
| [43] | 卢子兴. 微孔泡沫塑料力学行为的研究综述 [J]. 力学进展, 2002, 32(3): 365 378. |
| [44] | Matuana L M, Park C B, Balatinecz J J. Processing and cell morphology relationships for microcellular foamed PVC/wood-fiber composites [J]. Polymer Engineering and Science, Soc of Plastics Engineers, 1997, 37(7): 1137-1147. |
| [45] | Matuana L M, Park C B, Balatinecz J J. Characterization of microcellular foamed plastic/cellulosic fiber composites[A].Proceedings of the 1998 56th Annual Technical Conference,ANTEC [C]. Brook-field, USA: SocPlastEng, 1998, 2:1968-1974. |
| [46] | Cotgreave T, Shortall J B. Failure mechanisms in fibre reinforced rigid polyurethane foam [J]. J Cell Plast, 1977, 13(4): 240-244. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%