为了提高复合材料的质量稳定性并降低成本,需要研究纤维密实状态的变化规律及其影响因素.采用密实指数Ic表征单向复合材料层板中纤维的密实程度,进而研究了热压工艺下压力、加压时机及铺层层数对密实指数的影响规律.结果表明,密实指数随压力的增大呈非线性增大,随加压点树脂粘度的增大而减小,随铺层层数的增大呈线性减小.该研究结果为优化热压成型工艺窗口和短程流动模型的建立提供了重要的实验依据.
参考文献
| [1] | 贺鹏飞,刘建萍,戴瑛,等.纤维分布不均匀对单向纤维增强复合材料横向拉伸强度的影响[J].机械工程材料,2000,24(1):8 10.He P F,Liu J P,Dai Y,et al.Influence of uneven distribution of the fibers in the matrix on the transverse tensile strength [J].Materials for Mechanical Engineering,2000,24(1):8-10. |
| [2] | Hubert P,Poursartip A.A review of flow and compaction modeling relevant to thermoset matrix laminate processing[J].Journal of Reinforced Plastics and Composites,1998,17(4):287-318. |
| [3] | Hubert P,Poursartip A.A method for the direct measurement of the fiber bed compaction curve of composition prepregs [J].Composites Part A,2001,32(2):179-187. |
| [4] | 扎姆阿茹娜,张佐光,王科,等.复合材料热压成型过程用光纤压力测试技术[J].复合材料学报,2004,21(1):45-50.Zhamu Aruna,Zhang Z G,Wang K,etal.Optical fiber pressure testing technology used in cure molding process for polymer matrix composites [J].Acta Materiae Compositae Sinica,2004,21(1):45-50. |
| [5] | Blesta D C,Duffyb B R,McKeeb S.Curing simulation of thermoset composites [J].Composites Part A,1999,30 (11):1289-1309. |
| [6] | 任骞,扎姆阿茹娜,张佐光.热压成型工艺单向铺层纤维密实状态研究[J].玻璃钢/复合材料,2004(4):20 23.Ren Q,Zhamu Aruna,Zhang Z G.Study on compaction of aligned fiber in hot pressing process [J].FRP/CM,2004(4):20-23. |
| [7] | 庄礼贤,尹协远.流体力学[M].合肥:中国科学技术大学出版社,1997.125-126. |
| [8] | Gutowski T G,Cai M T.The consolidation of laminate composites [J].Journal of Composite Material,1987 (21):173-188. |
| [9] | 郭烈锦.两相与多相流动力学[M].西安:西安交通大学出版社,2002.340-360. |
| [10] | Young W B.Compacting pressure and cure cycle for processing of thick composite laminates [J].Composites Science and Technology,1995,54(3):299-306. |
| [11] | Young W B.Consolidation and cure simulations for laminated composites [J].Polymer Composites,1996,17 (1):142-148. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%