提出了三维纤维弯曲模型,基于有限元法和周期性边界条件建立了缝合层板压缩强度分析方法,采用桥联模型和最大应力判据分析损伤扩展并获得压缩强度,预报结果与试验吻合较好.详细探讨了缝合参数对层合板压缩强度的影响规律,结果表明: 缝合方向与表面纤维方向一致时,较小的缝合针距和行距、较大的缝合线半径对压缩强度较为有利; 缝合方向与表面纤维方向垂直时,较小的缝合针距和缝合线半径、较大的缝合行距对压缩强度较为有利.
参考文献
| [1] | 陈纲,郦正能,程小全,等.厚度对缝合层合板力学性能的影响[J].复合材料学报,2005,22(6):135-138.Chen Gang,Li Zhengneng,Cheng Xiaoquan,et al.Effect of thickness on the mechanical properties of the stitched laminates[J].Acta Materiae Compositae Sinica,2005,22(6):135-138. |
| [2] | 陈纲,郦正能,寇长河.T300帘子布/QY9512缝纫含孔板拉伸性能[J].复合材料学报,2005,22(4):108-111.Chen Gang,Li Zhengneng,Kou Changhe.Behavior of stitched uniweave T300/QY9512 laminates(with a hole)under in-plane tension[J].Acta Materiae Compositae Sinica,2005,22(4):108-111. |
| [3] | Mouritz A P,Cox B N.A mechanistic approach to the properties of stitched laminates[J].Composites Part A,2000,31:1-27. |
| [4] | Mouritz A P,Leong K H,Herszberg I.A review of the effect of stitching on the in-plane mechanical properties of fibre-reinforced polymer composites[J].Composites Part A,1997,28A:979-991. |
| [5] | Farley G L.A mechanism responsible for reducing compression strength of through-the-thickness reinforced composite material[J].Journal of Composite Materials,1992,26:1784-1795. |
| [6] | Farley G L,Dickinson L C.Removal of surface loop from stitched composites can improve compression and compression-after-impact strengths[J].Journal of Reinforced Plastics and Composites,1992,11(6):6-33. |
| [7] | Kyriakides S,Ruff A E.Aspects of the failure and postfailure of fibre composites in compression[J].Journal of Composite Materials,1997,31(20):2000-2037. |
| [8] | Vogler T J,Hsu S Y,Kyriakides S.On the initiation and growth of kink bands in fiber composites Ⅱ:Analysis[J].International Journal of Solids and Structures,2001,38:2653-2682. |
| [9] | 桂良进,范子杰,陈宗渝,等.缝纫层合板的本构关系研究Ⅰ:缝纫单层板有效弹性常数分析[J].复合材料学报,2002,19(1):95-100.Gui Liangjin,Fan Zijie,Chen Zongyu,et al.Study on constitutive relationship of stitched laminates Ⅰ:Analysis of effective elastic constants of stitched lamina[J].Acta Materiae Compositae Sinica,2002,19(1):95-100. |
| [10] | Harris B.Engineering composite materials[M].London:Institute of Metals,1986:15-18. |
| [11] | Xia Z H,Zhang Y F,Ellyin F.A unified periodical boundary condition for representative volume elements of composites and applications[J].International Journal of Solids and Structures,2003,40:1907-1921. |
| [12] | Huang Z M.Simulation of the mechanical properties of fibrous composites by the bridging micromechanics model[J].Composites Part A,2001,32:143-172. |
| [13] | 李晨,许希武,汪海.缝合复合材料层板面内力学性能试验与分析[J].南京航空航天大学学报,2005,37(2):192-197.Li Chen,Xu Xiwu,Wang Hai.Experimental and analytical study on mechanical properties of stitched laminates[J].Journal of Nanjing University of Aeronautics and Astronautics,2005,37(2):192-197. |
| [14] | 汪海.复合材料缝合结构静强度研究[D].大连:大连理工大学,2001.Wang Hai.A study on static strength of stitched composite structures[D].Dalian:Dalian University of Technology,2001. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%