热固性树脂体系在贮存期间会发生物理或化学变化,这会影响树脂体系的流变特性,进而影响其成型工艺性.本文中针对几种典型热压工艺用高性能热固性树脂体系,采用平板流变仪研究了贮存期对树脂体系流变特性的影响,并利用差示扫描量热法、红外光谱法和凝胶色谱法分析了流变特性变化的具体原因;同时以流动度为表征参数,考察了树脂体系工艺性随贮存期的变化规律.结果表明,树脂体系的贮存特性主要由其固化反应特性和添加剂的贮存特性决定.该研究结果为热压工艺参数的选择和优化提供了重要实验依据.
参考文献
| [1] | Halley Peter J,Mackay Michael E.Chemorheology of thermosets:An overview[J].Polymer Engineering and Science,1996,36(5):593-608. |
| [2] | Jones R S,Oakely D.Interpretation of rheological data in terms of model systems[J].Composites Part A,1990,21(5):415-418. |
| [3] | Hintrichs R J,Hoier S N,Wade B E.Modeling rheological data for use in engineering process and development[C]// National SAMPE Technical Conference.Albuquerque:SAMPE,1984:513-528. |
| [4] | Hu X,Fan J,Chee Yoon Yue.Rheological study of crosslinking and gelation in bismaleimide/cyanate ester interpenetrating polymer network[J].Journal of Applied Polymer Science,2001,80(13):2437-2445. |
| [5] | 王斌,杨建奎,方东红,等.湿法缠绕用环氧配方适用期研究[J].固体火箭技术,1999,22(4):61-64.Wang Bin,Yang Jiankui,Fang Donghong,et al.Pot life of epoxy formula for wet winding[J].Journal of Solid Rocket Technology,1999,22(4):61-64. |
| [6] | 沈超.3232树脂预浸料的贮存试验研究[J].航空材料学报,2003,23(增刊):167-170.Shen Chao.Investigations on the storage of 3232 resin prepreg[J].Journal of Aeronautical Material,2003,23(Suppl):167-170. |
| [7] | 石凤,段跃新,梁志勇,等.RTM专用双马来酰亚胺树脂体系化学流变特性[J].复合材料学报,2006,23(1):56-62.Shi Feng,Duan Yuexin,Liang Zhiyong,et al.Rheological behavior of a bismaleimide resin system for RTM process[J].Acta Materiae Compositae Sinica,2006,23(1):56-62. |
| [8] | 郭战胜,杜善义,张博明,等.先进复合材料用环氧树脂的固化反应和化学流变[J].复合材料学报,2004,21(4):146-151.Guo Zhansheng,Du Shanyi,Zhang Boming,et al.Cure kinetics and chemorheological behavior of epoxy resin used in ad vanced composites[J].Acta Materiae Compositae Sinica,2004,21(4):146-151. |
| [9] | 邓卫华,冀克俭,张银生,等.双马来酰亚胺树脂固化过程的红外光谱分析[J].化学分析计算,2001,10(2):24-26.Deng Weihua,Ji Kejian,Zhang Yinsheng,et al.IR analysis of the curing process of bismaleimide resin[J].Journal of Chemical Analysis Measurement,2001,10(2):24-26. |
| [10] | Yao Yuan,Zhao Tong,Yu Yunzhao.Novel thermosetting resin with a very high glass-transition temperature based on bismaleimide and allylated novolac[J].Journal of Applied Polymer Science,2005,97(2):443-448. |
| [11] | Martin G C,Tungare A V.Modeling the rheological and dielectric properties during thermoset cure[J].Polymeric Materials Science and Engineering,1988,59:980-984. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%