欢迎登录材料期刊网

材料期刊网

高级检索

将聚碳硅烷(PCS)纤维在1-己炔气氛中进行化学气相交联不熔化处理,与空气不熔化相比,能大大降低纤维的氧含量.PCS纤维在1-己炔气氛中反应,其组成和结构都发生了变化.结果表明,在1-己炔气氛中,PCS分子的Si-H键的反应程度和纤维的凝胶含量随温度的升高而逐渐增加.反应机制为1-己炔受热引发PCS分子中的Si-H和Si-CH3键断裂生成Si自由基和Si-CH2自由基,促进PCS分子间形成Si-CH2-Si交联结构,最终实现不熔化.反应中有少量己基引入到PCS分子结构中.制得的SiC纤维拉伸强度达到2.79 GPa,氧含量降低到5 wt%~6 wt%,并且纤维的耐高温性能明显优于Nicalon纤维.在Ar气中处理至1300℃,纤维强度保留率约为80%,处理至1400℃,纤维的强度保留率为60%,并且在1300~1600 ℃的处理过程中,纤维中β-SiC微晶的晶粒尺寸变化只有2.18 nm.

参考文献

[1] Mah T,Hecht N L,Mc Cullum D E.Thermal stability of SiC fibers(Nicalon)[J].J Mater Sci,1984,19(4):1191-1201.
[2] 王军,冯春祥,宋永才.聚碳硅烷纤维的空气不熔化处理[J].化学学报,1998,56(1):77-80.Wang Jun,Feng Chunxiang,Song Yongcai.The oxidative stabilization of polycarbosilane fibers in air[J].Acta Chimica Sinica,1998,56(1):77-80.
[3] Takeda M,Urano A,Sakamoto J.Microstructure and oxidation behavior of silicon carbide fibers derived from polycarbosilane[J].J Am Ceram Soc,2000,83(5):1171-1176.
[4] Ly H Q,Taylor R,Day R J.Conversion of polycarbosilane(PCS) to SiC-based ceramic,Part Ⅰ:Characterisation of PCS and curing products[J].J Mater Sci,2001,36:4037-4043.
[5] Shimoo T,Okamura K,Morisada Y.Active-to-passive oxidation transition for polycarbosilane-derived silicon carbide fibers heated in Ar-O2 gas mixtures[J].J Mater Sci,2002,37:1793-1800.
[6] 楚增勇,宋永才,冯春祥.先驱体转化法连续SiC纤维国内外研究与开发现状[J].无机材料学报,2002,17(2):193-201.Chu Zengyong,Song Yongcai,Feng Chunxiang.Advances in the polymer-derived continuous SiC fibers[J].J Inorg Mater,2002,17(2):193-201.
[7] 程祥珍,肖加余,谢征芳.聚碳硅烷纤维的不熔化与SiC纤维制备研究[J].材料工程,2004(1):29-37.Cheng Xiangzhen,Xiao Jiayu,Xie Zhengfang.Research on curing of polycarbo silane fiber and preparation of SiC fiber[J].J Mater Engin,2004(1):29-37.
[8] Ochiaia S,Kimurab S,Tanakab H.Degradation of SiC/SiC composite due to exposure at high temperatures in vacuum in comparison with that in air[J].Composites Part A,2004,35:33-40.
[9] William T,Christopher D B,Michael D S.Polymer-derived SiC fibers with low oxygen content and improved thermomechanical stability[J].Compos Sci Technol,1994,51:145-159.
[10] Chu Zengyong,Song Yongcai,Xu Yunshu,et al.Enhanced irradiation cross-linking of polycarbosilane[J].J Mater Sci Lett,1999,18:1793-1795.
[11] Idesaki A,Narisawa M,Okamura K.Application of electron beam curing for silicon carbide fiber synthesis from blend polymer of polycarbosilane and polyvinylsilane[J].Radiat Phys Chem,2001,60(4/5):483-487.
[12] 楚增勇,宋永才,冯春祥,等.电子束辐射交联制备低氧含量SiC纤维的研究[J].复合材料学报,2002,19(5):22-27.Chu Zengyong,Song Yongcai,Feng Chunxiang,et al.SiC fibers with a low oxygen content prepared by electron beam radiation curing[J].Acta Materiae Compositae Sinica,2002,19(5):22-27.
[13] Hasegawa Y.SiC fiber prepared from polycarbosilane cured without oxygen[J].J Inorg Organomet Polym,1992,2(1):161-169.
[14] Hasegawa Y.New curing method for polycarbosilane with unsaturated hydrocarbons and application to thermally stable SiC fiber[J].Compos Sci Technol,1994,51:161-166.
[15] 毛仙鹤,宋永才,李伟.由聚碳硅烷纤维通过化学气相交联法制备低氧含量碳化硅纤维[J].硅酸盐学报,2006,34(1):16-20.Mao Xianhe,Song Yongcai,Li Wei.Preparation of low oxygen silicon carbide fiber by the chemical vapor curing for polycarbosilane fibers[J].Journal of the Chinese Ceramic Society,2006,34(1):16-20.
[16] 张德恒,刘绍文,赵强,等.自由基反应在硅氢加成中的应用[J].河南科学,1997,15(4):395-401.Zhang Deheng,Liu Shaowen,Zhao Qiang,et al.The application of free radical reaction to hydrosilylation[J].Henan Science,1997,15(4):395-401.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%