欢迎登录材料期刊网

材料期刊网

高级检索

针对蜂窝夹层板的共固化工艺,以玻纤/环氧648复合材料为面板,以Nomex蜂窝为夹芯材料,采用真空袋法研究了树脂流动对胶瘤面积和面板孔隙缺陷的影响,并通过平拉强度的测试考察了胶接强度与胶瘤面积之间的关系.结果表明:胶瘤面积随加压时机的推迟先增大后减小,并且下面板/芯材胶瘤面积要大于上面板/芯材胶瘤面积;在树脂黏度变化的不同阶段,面板中的孔隙消除机制不同,并与密封袋内抽气通路的分布有关.力学测试结果发现,胶瘤面积的增大有利于平拉强度的提高,但当胶接强度超过蜂窝抗拉强度时,平拉强度的测试方法存在局限性.

参考文献

[1] Ryo O,Kortschot M T.The role of the resin fillet in the delamination of honeycomb sandwich structures[J].Composites Science and Technology,2002,62(14) 1811-1819.
[2] Kishi H,Nishimura A,Odagiri N."TORAYCA" T700 fabric/3680 self-adhesive type honeycomb co-cure prepreg[J].SAMPE Journal,2001,37(2):89-92.
[3] Vadakke V,Carlsson L A.Experimental investigation of compression failure of sandwich specimens with face/core debond[J].Composites Part B,2004,35(6/8):583-590.
[4] Young Wenbin.Resin flow analysis in the consolidation of multi-directional laminated composites[J].Polymer Composites,1995,16(3):250-257.
[5] Grove S M,Popham E,Miles M E.An investigation of the skin/core bond in honeycomb sandwich structures using statistical experimentation techniques[J].Composites Part A,2006,37(5):804-812.
[6] Nam J D,Sefferis J C.Gas permeation and viscoelastic deformation of prepregs in composite manufacturing processes[J].Polymer Composites,1995,16(5):370-377.
[7] Wood J R.Bader M G.Void control for polymer-matrix composites Ⅰ:Theoretical and experimental methods for determining the growth and collapse of gas bubbles[J].Composites Manufacturing,1994,5(3):139-147.
[8] Campbell F C,Mallow A R.Porosity in carbon fiber composites an overview of causes[J].Journal of Advanced Materials,1995,26(4):18-33.
[9] 赵卫娟,张佐光,王景明.树脂流动对气泡运动特性的影响[J].复合材料学报,2006,23(2):25-29.Zhao Weijuan,Zhang Zuoguang,Wang Jingming.Effects of the resin flow on the bubble moving behavior[J].Acta Materiae Compositae Sinica,2006,23(2):25-29.
[10] 张广成,赵景利.蜂窝夹层结构复合材料的力学性能研究[J].机械科学与技术,2003,22(2):280-282.Zhang Guangcheng,Zhao Jingli.Study on mechanical properties of honeycomb sandwich structure composite[J] Mechanical Science and Technology,2003,22(2):280-282.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%