管状纺织复合材料以翻衬的方法衬于管道,以"管中管"的形式修复管道,受到翻转压力和输送介质压力的作用,其强度直接影响修复效果.本文中采用材料力学和工程流体力学相关理论,对管状纺织复合材料翻衬时和衬于管道后的受力情况,建立了较为系统且完整的计算公式,并以修复燃气管道为例,对管状纺织复合材料经向和纬向的强度进行了设计.结果表明:管道内压引起的管状纺织复合材料的纬向应力是经向应力的2倍;而翻转压力引起的经向应力,还与翻转速度和温度有关.
参考文献
| [1] | 张平,桂良进,范子杰.编织复合材料圆管准静态轴向压缩吸能特性的试验研究[J].复合材料学报,2007,24(1):146-150.Zhang Ping,Gui LiangJin,Fan Zijie.Experimental investiga-tion on the energy absorption characteristic of braided composite circular tubes subjected to quasi-static axial compression[J].Acta Materiae Compositae Sinica,2007,24(1):146-150. |
| [2] | ASTM 1216-03.Standard practice for rehabilitation of exist-ing pipelines and conduits by the inversion and curing of a resin -impregnated tube[S].West Conshohocken,United States:ASTM International,2003. |
| [3] | ASTM F2207-02.Standard specification for cured-in-place pipe lining system for rehabilitation of metallic gas pipe[S].West Conshohocken,United States:ASTM International,2002. |
| [4] | ASTM F1743-03.Standard practice for rehabilitation of existing pipelines and conduits by pulled in-place installation of cured-in-place thermosetting resin pipe (CIPP)[S].West Conshohocken,United States:ASTM International,2003. |
| [5] | Zhang Shujie,Wang Rui.Research on tubing textile composite applied on pipeline rehabilitation technology[C]// Interna-tional Forum on Textile Science & Engineering for Doctoral Candidates.Shanghai:Donghua University,2006:161. |
| [6] | 刘雄亚,晏石林.复合材料制品设计及应用[M].北京;化学工业出版社,2006:34-36. |
| [7] | 米淇.刘殿博.采用翻转内衬技术修复管道[J].油气储运,2000,49(1):58-59.Mi Qi,Liu Dianbo.Repairing pipeline adopting inversion lining technology[J].Qil & Gas Storage and Transportation,2000,49(1),58-59. |
| [8] | 袁恩熙.工程流体力学[M].北京:石油工业出版社,1986:35-40. |
| [9] | 赵孝宝.工程流体力学[M].南京:东南大学出版社,2004:64-69. |
| [10] | 董久樟.翻转内衬法修复我国燃气旧管道技术的应用研究[D].北京:北京建筑工程学院,2001:47. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%