用空间辐照环境模拟设备对甲基硅橡胶进行了质子辐照.辐照能量为200keV,辐照剂量范围为1014～1016cm-2.用热发光和热激电流分析方法,研究了硅橡胶质子辐照前后载流子陷阱能级△E及载流子类型的变化规律结果表明:当辐照剂量小于1015cm-2时,△E下降;当辐照剂量超过1015cm-2后,△E上升硅橡胶原始样品中主要载流子类型是电子型.当质子辐照剂量超过5×1014cm-2后,主要载流子类型转变为空穴型.辐照剂量继续增加,载流子类型又有向电子型转变的趋势.
参考文献
| [1] | P.A.Gierow,J.P.Paxton,T.L.Cost,Journal of Spacecraft and Rockets,32(2),317(1995) |
| [2] | A.I.Akishin,I.B.Teplov,Physics and Chemics in the Material Process,3,47(1992) |
| [3] | L.X.Zhang,S.Q.Yang,S.Y.He,Q.Wei,A Study on Damage of Methyl Silicone Rubber Induced by Proton Radiation,Sixth International Space Conference(Toroto-Canada,Science Press,May 1～3,2002) |
| [4] | L.X.Zhang,S.Q.Yang,S.Y.He,Chinese Journal of Polymer Science,21(5),563(2003) |
| [5] | L.X.Zhang,S.Q.Yang,S.Y.He,Journal of Spacecraft and Rockets.(in press) |
| [6] | ZHANG Lixin(张丽新),YANG Shiqin(杨士勤),HE Shiyu(何世禹),High Power Laser and Particle Beams(强激光与粒子束),14(14),629(2002) |
| [7] | Yong Fan,Xuan Wang,Weguo Zhang,J.Phys.D:Appl.Phys.,32,2809(1999) |
| [8] | H.Shimizu,T.Kitano,K.Natayama,Proc.Shanghai,1996,ISE9:552 |
| [9] | Y.Fan,X.Wang,J.Mater.Sci.Technol.,14(2),357(1998) |
| [10] | XIA Zhongfu(夏钟福),Electret(驻极体)(Beijing,Science Press,2001)p.225 |
| [11] | QIAN Baogong(钱保功),XU Guanfan(许观藩),YU Fusheng(余赋生),Translation and Flab of HighPolymer(高聚物的转变与松弛)(Beijing,Science and Technology Press,1986)p.120 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%