为了定量分析聚合反应挤出过程中各种物理量之间的复杂关系,进而调控化学反应和材料结构,采用有限体积方法与半隐式迭代算法,对紧密啮合同向旋转双螺杆挤出机内的苯乙烯阴离子聚合反应挤出过程进行数值模拟,研究了单体浓度,转化率、平均相对分子质量、流体粘度等物理量的影响并获得了其变化规律,该模拟结果与实验结果基本一致.
参考文献
| [1] | D.B.Todd,Consider reactive extrusion,Chemical Engineering Progress,88,72(1992) |
| [2] | DONG Jianhua,MA Jin,YIN Jinghua,AN Lijia,ZHENG Anna,SHENG Jing,ZHOU Chixing,The fundamentals of reactive polymer processing,Bulletin of National Natural Science Foundation of China,(1),12(2003)(董建华,马劲,殷敬华,安立佳,郑安呐,盛京,周持兴,高分子材料反应加工的基本科学问题,中国科学基金,(1),12(2003)) |
| [3] | ZHANG Guofang,JIA Yuxi,WU Lili,AN Lijia,Progress in numerical simulation and mathematical formulations of reactive extrusion processes for polymerization,Polymer Materials Science and Engincering,21(2),33(2005)(张国芳,贾玉玺,吴莉莉,安立佳,聚合反应挤出过程的数学描述及数值模拟进展,高分子材料科学与工程,21(2),33(2005)) |
| [4] | W.Michaeli,A.Grefenstein,U.Berghaus,Twin-screw extruders for reactive extrusion,Polymet Engineering and Science,35,1485(1995) |
| [5] | H.A.Jougbloed,J.A.Kiewiet,J.H.Vandijk,L.P.B.M.Janssen,The self-wiping co-rotating twin-screw extruder as a polymerization reactor for methacrylates,Polymer Engineering and Science,35,1569(1995) |
| [6] | J.Gimenez,M.Boudris,P.Cassagnau,A.Michel,Control of bulk ε-caprolactone polymerization in a twin screw extruder,Polymer Reaction Engineering,8,135(2000) |
| [7] | H.Kye,J.L.White,Simulation of continuous polymerization in a modular intermeshing co-rotating twin screw extruder with application to caprolactam conversion to polyamide 6,International Polymer Processing,11,129(1996) |
| [8] | L.P.B.M.Janssen,On the stability of reactive extrusion,Polymer Engineering and Science,38,2010(1998) |
| [9] | W.Zhu,Y.Jaluria,Steady and transient flow of a non-Newtonian chemically reactive fluid in a twin-screw extruder,Polymer Engineering and Science,42,2120(2002) |
| [10] | T.Fukuoka.Numerical analysis of a reactive extrusion process.Part Ⅱ:Simulations and verifications for the twin screw extrusion,Polymer Engineering and Science,40,2524(2000) |
| [11] | L.Zhu,K.A.Narh,K.S.Hyun,Evaluation of numerical simulation methods in reactive extrusion,Advances in Polymer Technology,24,183(2005) |
| [12] | Gao Shishuang,Zhang Ying,Zheng Anna,Xiao Huining,Polystyrene prepared by reactive extrusion:kinetics and effect of processing parameters,Polymer for Advanced Technologies,15,185(2004) |
| [13] | Si Linxu,Zheng Anna,Yang Haibo,Guo Renyi,Zhu Zhongnan,Zhang Yongming,A study on new polymerization technology of styrene,Journal of Applied Polymer Science,85,2130(2002) |
| [14] | SI Linxu,ZHENG Anna,ZHU Zhongnan,Studies on modeling of reactive extrusion in twin screws,Polymer Materials Science and Engineering,18(1),26(2002)(司林旭,郑安呐,朱中南,双螺杆反应挤出模型的研究,高分子材料科学与工程,lS(1),26(2002)) |
| [15] | YAN Wei,ZHANG Zhao,XU Yun,ZHENG Anna,LIU Honglai,Simulation of the reactive extrusion process of styrene in a modular intermeshing co-rotating twin screw extruder,Journal of East China University of Science and Technology(Natural Science Edition),30(4),414(2004)(烟伟,张昭,徐云,郑安呐,刘洪来,苯乙烯反应挤出过程模拟及数值计算,华东理工大学学报(自然科学版),30(4),414(2004)) |
| [16] | S.David,T.Costas,A.D.Thomas,Mixing analysis of reacrive polymer flow in conveying elements of a co-rotating twin screw extruder,Advances in Polymer Technology,19,22(2000) |
| [17] | LI Peng,GENG Xiaozheng,MA Xiuqing,Threedimensional flow modeling of the flight element in a co-rotating twin screw extruder,China Plastics,15(6),73(2001)(李鹏,耿孝正,马秀清,啮合同向双螺杆挤出机螺纹元件三维流场分析,中国塑料,15(6),73(2001)) |
| [18] | C.Rauwendaal.The geometry of self-cleaning twinscrew extruders,Advances in Polymer Technology,15,127(1996) |
| [19] | WU Qiye,wu Jinglan,Polymer Rheology(Beijing,Higher Education Press,2002)(吴其晔,巫静安,高分子材料流变学(北京,高等教育出版社,2002)) |
| [20] | LIANG Zhiming,ZHOU Chixing,YU Wei,WANG Gang,WEN Shaoguo.Numerical simulation of non-isothermal planar contraction flow of polymer melts,Polymer Materials Science and Engineering,19(1),15(2003)(梁志明,周持兴,俞炜,王刚,温绍国,聚合物熔体的非等温平板收缩流动的数值模拟,高分子材料科学与工程,19(1),15(2003)) |
| [21] | PAN Zuren,Polymer Chemistry(Beijing,Chemical Industry Press,2003)(潘祖仁,高分子化学(北京,化学工业出版社,2003)) |
| [22] | JIA Yuxi,YUAN Bo,YANG Junying,AN Lijia,Progress in numerical simulation and mathematical formulations of resin transfer molding processes,Chinese Journal of Materials Research,19(5),449(2005)(贾玉玺,原波,杨俊英,安立佳,树脂传递模塑过程的数学描述和数值模拟进展,材料研究学报,19(5),449(2005)) |
| [23] | W.D.Richards,R.K.Prud'homme,The viscosity of concentrated polymer solutions containing low molecular weight solvents,Journal of Applied Polymer Science,31,763(1986) |
| [24] | J.D.Anderson.Computational Fluid Dynamics:the Basics With Applications(Beijing,Tsinghua University Press and McGraw-Hill Beijing Omce,2002) |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%