用CO2脉冲激光扫描AISI304-喷塑涂层的表面,分析喷塑涂层的破坏特征和断裂行为,研究了激光热效应下喷塑涂层的结合强度.结果表明,可用吸收的激光能量定量地表征涂层和基体之间的结合强度,聚烯烃喷塑涂层-AISI304的理论结合强度为19.9 MPa,当涂层中塑料与基体的溶度参数相近时,涂层与基材的结合界面附着力较强.
参考文献
| [1] | DONG Jianpeng,TIAN Zhirui,Analysis of the fracture mechanisms of plastic coatings under tensile stress,China Surface Engineering,34(1),41(1997)(董剑鹏,田芝瑞,拉应力作用下塑料涂层断裂机理分析,中国表面工程,34(1),41(1997)) |
| [2] | SHAO Shuying,FAN Zhengxiu,FAN Ruiying,Study of residual stress in ZrO2 thin films,Acta Optical Sinica,24(4),437(2004)(邵淑英,范正修,范瑞瑛,ZrO2薄膜残余应力实验研究,光学学报,24(4),437(2004)) |
| [3] | ZHAN Meiqiong,ZHANG Dongping,HE Hongbo,Influence of process conditions on properties of ZrO2 coatings prepared by electron beam evaporation,Chinese Journal of Lasers,31(11),1356(2004)(占美琼,张东平,贺洪波,电子束蒸发沉积工艺条件对ZrO2薄膜性能的影响,中国激光,31(11),1356(2004)) |
| [4] | Hongbin YU,Haiqing CHEN,Jun LI,An in situ growth method for property control of LPCVD polysilicon film,Chinese Optics Letters,2(8),489(2004) |
| [5] | LIU Jie,LIU Yang,LIANG Jieying,Thermal stress and strain of modified PAN fiber during thermal-oxidation stabilization process,Chinese Journal of Materials Research,19(4),389(2005)(刘杰,刘扬,梁节英,改性PAN共聚纤维在预氧化过程中的热应力应变,材料研究学报,19(4),389(2005)) |
| [6] | CHU Shuangjie,The tensile strength and fracture properties of the coated carbon fibers,Journal of Applied Sciences,13(1),74(1995)(储双杰,涂层碳纤维的抗拉强度与断裂特性,应用科学学报,13(1),74(1995)) |
| [7] | ZHAO Ruofei,DAI Gance,Polypropylene composites reinforced with combinations of mica and fiber Ⅱ.investigation on interfacial properties,Chinese Journal of Materials Research,16(2),141(2002)(赵若飞,戴干策,云母和纤维组合增强聚丙烯复合材料Ⅱ.界面性能研究,材料研究学报,16(2),141(2002)) |
| [8] | YU Jiuming,FANG Xiaoying,XIAO Yunzhen,Liquid and solid bonding strength of Cu/Fe interface in copper clad steel,Chinese Journal of Materials Research,14(6),661(2000)(于九明,方晓英,孝云桢,铜/钢液固相复合界面的结合强度,材料研究学报,14(6),661(2000)) |
| [9] | QI Ming,GU Mingyuan,The effect of discontinuous interrace on fiber-reinforced composites,Chinese Journal of Materials Research,14(Suppl.),87(2000)(齐明,顾明元,树枝状非连续界面对纤维增强复合材料强度的影响,材料研究学报,14(增刊),87(2000)) |
| [10] | SU Bing,YU Xudong,ZHANG Wenguang,WANG Chengtao,Characterisation and mechanical adhesion of HAP/TiO2 composite films on Ti6A14V processed by solgel method,Journal of Functional Materials Contents,36(7),1075(2005)(苏冰,于旭东,张文光,王成焘,Ti6A14V表面HAP/TiO2生物活性复合涂层的表征及结合强度分析,功能材料,36(7),1075(2005)) |
| [11] | TANG Changguo,ZHU Jinhua,ZHENG Xiulin,Measurement of interface strength of tin coating/substrate by laser spallation,Chinese Journal of Materials Research,lO(4),393(1996)(唐长国,朱金华,郑修麟,激光层裂法测涂层/基体结合力,材料研究学报,10(4),393(1996)) |
| [12] | HOU Zhende,TANG Lingxia,FU Donghui,ZHANG Zengfu,TIAN Xinli,Measurement of bond strength of coating using stress wave,Acta Armamentar Ⅱ,27(2),306(2006)(侯振德,汤灵霞,富东慧,张增福,田欣利,利用应力波测量涂层的结合强度,兵工学报,27(2),306(2006)) |
| [13] | KUANG Ziqi,DAI Mingjiang,XIONG Guogang,Tungsten coating on Mo substrate by vacuum plasma spray,Journal of Vacuum Science and Technology,25(5),381(2005)(邝子奇,代明江,熊国刚,钼基体上真空等离子体喷涂钨涂层的研究,真空科学与技术学报,25(5),381(2005)) |
| [14] | XU Weipu,XU Binshi,ZHANG Wei,Tribological properties of high velocity arc sprayed FeAICr/Ni wraped Cr3C2 coatings,The Chinese Journal of Nonferrous Mebals,14(10),1671(2004)(徐维普,徐滨士,张伟,高速电弧喷涂FeAlCr/Ni包Cr3C2复合涂层摩擦学特性,中国有色金属学报,14(10),1671(2004)) |
| [15] | S.J.Howard,Y.C.Tsui,T.W.Clyne,The effect of residual stresses on the debonding of coatings I.A model for delamination at a bimaterial interface,Acta Metall.Mater.,42,2823(1994) |
| [16] | MA Wei,PAN Wenxia,ZHANG Wenhong,WU Chengkang,Progress in research on the material propeties and failure mechanisms of thermal barrier coatings,Advances in Mechanics,32(1),41(2002)(马维,潘文霞,张文宏,吴承康,热喷涂涂层中残余应力分析和检测研究进展,力学进展,32(1),41(2002)) |
| [17] | ZHOU Genshu,ZHENG Maosheng,JING Xinli,The influence of heat treatment temperature on the properties of organically modified ceramics coating on optical plastics,Journal of Xi'an Jiaotong University,31(3),92(1997)(周根树,郑茂盛,井新利,热处理温度对光学塑料耐磨涂层性能的影响,西安交通大学学报,31(3),92(1997)) |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%