采用ECAP技术和常规冷轧复合变形工艺制备了高强度工业纯钛,研究了复合变形后试样的力学性能与显微组织的关系.结果表明,工业纯钛经室温单道次ECAP和冷轧复合变形后,晶粒被严重拉长,形成了明显的纤维状组织,试样的抗拉强度高达805MPa;随着冷轧变形量的增大,变形组织的细化程度和均匀性提高,使试样的强度和塑性进一步提高.位错滑移和孪生是工业纯钛室温ECAP和冷轧复合变形的主要变形机制.
参考文献
[1] | V.Latysh,Gy.Krallics,I.Alexandrov,A.Fodor,Application of bulk nanostructured materials in medicine,Current Applied Physics,6,262(2006) |
[2] | ZHANG Yumei,GUO Tianwen,The researches on titanium and titanium alloy in dental use,Journal of Biomedical Engineering,17(2),206(2000)(张玉梅,郭天文,钛及钛合金在口腔科应用的研究方向,生物医学工程学杂志,17(2),206(2000)) |
[3] | NING Chongqin,ZHOU Yu,Development and research status of biomedical titanium alloys,Material Science and Technology,3(10),100(2002)(宁聪琴,周玉,医用钛合金的发展及研究现状,材料科学与工艺,3(10),100《div》《/div》(2002)) |
[4] | M.Long,H.J.Rack,Titanium alloys in total joint replacement-a materials science perspective,Biomaterials,19,1621(1998) |
[5] | B.S.Lee,M.H.Kim,S.K.Hwang,S.I.Kwun,S.W.Chae,Grain refinement of commercially pure zirconium by ECAP and subsequent intermediate heat treatment,Mater.Sci.Eng,303,1087(2007) |
[6] | R.Z.Valiev,R.K.Islamgaliev,I.V.Alexandrov,Bulk nanostructured materials from severe plastic deformation,Progress in Materials Science,45,103(2000) |
[7] | M.Furnkawa,Z.Horita,M.Nemoto,T.G.Longdon,Review processing of metals by equal channel angular pressing,Journal of Mater.Sci.,36,2835(2001) |
[8] | ZHENG Lijing,CHEN Changqi,ZHOU Tietao,LIU Peiying,ZENG Meiguang,Grain-refining mechanism of ECAP and its effect on microstructures and mechanical properties of pure Al,Rare Metal Materials and Engineering,33(12),1325(2004)(郑立静,陈昌麒,周铁涛,刘培英,曾梅光,ECAP细晶机制及对纯铝显微组织和力学性能的影响,稀有金属材料与工程,33(12),1325(2004)) |
[9] | SHI Fengjian,WANG Jianmin,XU Xiaojing,Study on recrystallization behavior of ultra-fine grain Copper fabricated by equal channel angular pressing,Hot Working Techonology,(12),24(2005)(石凤健,汪建敏,许晓静,ECAP法制备超细晶铜的再结晶行为研究,热加工工艺,(12),24(2005)) |
[10] | ZHAO Xicheng,YAO Xiaochun,LIU Xiaoyan,Effects of ECAP on microstructures and mechanical properties of 20mnsi steel,Journal of Materials Science and Engineering,24(3),396(2006)(赵西成,姚筱春,刘晓燕,ECAP变形对钢组织与性能的影响,材料科学与工程学报,24(3)396(2006)) |
[11] | V.V.Stolyarov,Y.T.Zhu,I.V.Alexandrov,T.C.Lowe,R.Z.Valiev,Influence of ECAP routes on the microstructure and properties of pure Ti,Mater.Sci.Eng.,299A,59(2001) |
[12] | V.V.Stolyarov,Y.T.Zhu,T.C.Lowe,R.Z.Valiev,Microstructure and properties of pure Ti processed by ECAP and cold extrusion,Mater.Sci.Eng.,303A,82(2001) |
[13] | V.V.Stolyarov,Y.T.Zhu,I.V.Alexandrov,T.C.Lowe,R.Z.Valiev,Grain refinement and properties of pure Ti processed by warm ECAP and cold rolling,Mater.Sci.Eng.,343A,43(2003) |
[14] | I.Kim,J.Kim,D.H.Shin,C.S.Lee,S.K.Hwang,Effects of equal channel angular pressing temperature on deformation structures of pure Ti,Mater.Sci.Eng.,342A,302(2003) |
[15] | FU Wenjie,ZHAO Xicheng,YANG Xirong,ZHENG Yanxia,Microstructure and properties of titanium processed by equal channel angular pressing at room temperature,Hot Working Techonolog,36(18),21(2007)(付文杰,赵西成,杨西荣,郑艳霞,室温等径弯曲通道变形工业纯钛的组织及性能研究,热加工工艺,36(18),21(2007)) |
[16] | Y.Iwahashi,J.Wang,Z.Horita,Principle of equal channel angular pressing for the processing of ultrafine grained materials,Scr.Mater.,35,143(1996) |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%