用一种将粉末冶金和原位合成相结合的全新方法原位合成了V8C7颗粒增强铁基复合材料,对其微观组织、耐磨性及其磨损机理进行了分析,并探讨了FE-V-C三元体系原位合成V8C7的机理.结果表明:石墨的存在降低了σ-(FeV)相的稳定性,使其分解为固溶大量V的α-Fe, C与V发生碳化反应生成V8C7;原位合成的V8C7颗粒增强铁基复合材料由增强相V8C7和α-Fe相组成,V8C7颗粒均匀分布在珠光体基体上;在重载干滑动摩擦条件下,V8C7颗粒增强铁基复合材料显示出良好的耐磨性能.
参考文献
| [1] | JongMin Lee,KwangJun Euh,Jun Cheol Oh,Microstructure and hardness improvement of TiC/stainless steel surface composites fabricated by high-energy electron beam,Materials Science & Engineering,A233,201(2002) |
| [2] | Y.C.Lin,S.W.Wang,Microstructure of TiC-W cladding on steel in nanoscale,Wear,256,720(2004) |
| [3] | L.Bourithis,Ath.Milonas,G.D.Papadimitriou,Plasma transferred are surface alloying of a construction steel to produce a metal matrix composite tool steel with TiC as reinforcing particles,Surface & Coatings Technology,165,286(2003) |
| [4] | Patrik Persson,Anders E.W.Jarfors,Steven Savage,Self-propagating high-temperature synthesis and liquid-phase sintering of TiC/Fe composites,Materials Processing Technology,127,131(2002) |
| [5] | XI Gan,LEI Ying,HU Kejun,Application of vanadium in foreign countries,World Non-Ferrous Metal,(2),13(2002)(锡淦,雷鹰,胡克俊,国外钒的应用概况,世界有色金属,(2),13(2002)) |
| [6] | YAO Xiurong,HAN Jiecai,LIU Zhaojing,GAO Yuegang,LI Fengzhen,REN Shanzhi,Optimized preparation process of spherical VCp stainless steel-based composites by in-situ synthesis,Journal of Materials Engineering,(8),59(2005)(姚秀荣,韩杰才,刘兆晶,高跃岗,李凤珍,任善之,原位生成球状VC颗粒增强不锈钢基复合材料的制备工艺优化,材料工程,(8),59(2005)) |
| [7] | Yisan Wang,Wen Huang,Fengchuan Li,In situ production of Fe-VC and Fe-TiC surface composites by cast-sintering,Composites Part A,32,281(2001) |
| [8] | Yisan Wang,Zhiping Sun,Yichao Ding,In-situ production of VC-SiO2-Fe surface composite by cast-sintering,Materials and Design,25,69(2004) |
| [9] | YE Dalun,HU Jianhua,Practical Data Hand Book of Inorganic Thermodynamics (Beijing,Metallurgical Industry Press,2002) p.285(叶大伦,胡建华,实用无机物热力学数据手册(北京,冶金工业出版社,2002)p.285) |
| [10] | YOU Xinghe,GB/T10418-2002,Steel Bonded Tungsten Carbides-Determination of Transverse Rupture Strength (Beijing,The Press Beijing University,2002) p.14)(游兴河,GB/T10418-2002,碳化钨钢结硬质合金横向断裂强度的测定(北京,北京大学出版社,2002)p.14) |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%