在MM200摩擦磨损试验机上对高速电弧喷涂3Cr13涂层进行了干摩擦条件下的磨损寿命试验,通过恒定应力加速模型分别建立了载荷、涂层厚度、摩擦副转速与3Cr13涂层磨损寿命的关系图,并采用多元回归分析建立了预测3Cr13涂层磨损寿命的模型,对影响因素进行了相关度分析.结果表明:载荷的增大引起涂层内分层失效,涂层厚度的减小则引起涂层整层剥落,摩擦副的转速主要影响摩擦副间的犁沟和微切削程度.影响磨损寿命大小的因素依次顺序为:涂层厚度、载荷和摩擦副转速.
参考文献
| [1] | B.S.Xu,W.Zhang,S.N.Ma,B.H.Tian,X.B.Liang,Structure and properties of coatings deposited by high velocity arc spray technique,Journal of Tribology,122(6),646(2000) |
| [2] | G.Jin,B.S.Xu,H.D.Wang,Q.F.Li S.C.Wei,Microstructure and tribological properties of stainless steel coatings sprayed by two methods based on spraying,Surface ＆ Coating Technology,201(9-11),5261(2007) |
| [3] | D.L.Duan,S.Li,X.H.Duan,S.Z.Li,Wear behavior of thermally sprayed coatings under different loading conditions,Tribology Transactions,48(1),45(2005) |
| [4] | E.Fernandez,M.Cadenas,R.Gonzalez,C.Navas,R.Fernandez,J.Damborenea,Wear behaviour of laser clad NiCrBSi coating,Wear,259(7-12),870(2005) |
| [5] | LIU Weixin,Mechanical Reliability Design (Beijing,Tsinghua University Press,2000) p.93 (刘惟信,机械可靠性设计,(北京,清华大学出版社,2000)P.93 |
| [6] | LI Jianfeng,ZHOU Xiaming,DING Chuanxian,Statistical analysis of porosity variations in plasma sprayed Cr3C2-NiCr coatings,Journal of Aeronautical Materials,21(1),33(2000) (李剑锋,周霞明,丁传贤,等离子喷涂Cr3C2-NiCr涂层的气孔率统计分析,航空材料学报,21(1),33(2000)) |
| [7] | GE Shirong,SUO Shuangfu,Prediction on the reliable life of sliding wear by the accelerated wear test,Tribology,15(4),368(1995) (葛世荣,索双富,抗磨可靠性寿命的加速试验与预测,摩擦学学报,15(4),368(1995)) |
| [8] | ZHANG Xiancheng,Structural integrity of plasmasprayed coating-based systems aiming to life predition in remanufacturing engineering,Doctoral dissertation,Shanghai Jiao Tong University (2007) (张显程,面向再制造寿命预测的等离子喷涂涂层结构完整性研究,博士学位论文,上海交通大学(2007)) |
| [9] | CHEN Wenhua,CHENG Yaodong,Optimum design of accelerated life test plans for Weibull life distributions,Journal of Zhejiang University (Engineering Science),33(4),337(1999)(陈文华,程耀东,威布尔分布下恒定应力加速寿命试验方案的优化设计,浙江大学学报(工学版),33(4),337(1999)) |
| [10] | )) |
| [11] | R Ahmed,Contact fatigue failure modes of HVOF coatings,Wear,253(3),473(2002) |
| [12] | X.C.Zhang,B.S.Xu,F.Z.Xuan,S.D.Tu,H.D.Wang,Y.X.Wu,Fatigue resistance of plasma-sprayed CrC-NiCr cermet coatings in rolling contact,Applied Surface Science,254(13),3734(2008) |
| [13] | K P A F E J I b C K H H.H.B,Mechanism of Friction and Wear (Beijing,Machinery Industry Press,1982) p.72 (克拉盖斯基,摩擦磨损计算原理,(北京,机械工业出版社,1982)p.72) |
| [14] | WANG Subin,ZHENG Haitao,SHAO Qianqian,SPSS Statistical (Beijing,Machinery Industry Press,2003) p.120(王苏斌,郑海涛,邵谦谦,SPSS统计分析,(北京,机械工业出版社,2003)P.120) |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%