欢迎登录材料期刊网

材料期刊网

高级检索

通过实海暴露实验,研究了H62黄铜,QA19-2铝青铜和QSn6.5-0.1锡青铜在中国南海海域800和1200m深海环境下浸泡3a的腐蚀行为.结果表明:H62黄铜的腐蚀速率最高,达到0.042 mm/a; QA19-2铝青铜最低,仅为0.003mm/a;QSn6.5-0.1锡青铜居中,约为0.004-0.007 mm/a.分析表明:随着水深的增加,H62黄铜的腐蚀速率呈线性降低;QA19-2铝青铜和QSn6.5-0.1锡青铜的腐蚀速率随水深的增加先降低后升高,腐蚀速率的最小值出现在水深800-1200m之间.采用SEM,EDS和XRD技术,进行了腐蚀形貌观察和腐蚀产物成分及相组成分析,结果表明:H62黄铜发生了严重的脱锌腐蚀,腐蚀产物由Cu,ZnO,Zn5(OH)8Cl2H2O和Cu(OH)2H2O组成,符合溶解-再沉积机制;QA19-2铝青铜和QSn6.5-0.1锡青铜发生了脱成分(Al,Sn)腐蚀,QA19-2铝青铜的腐蚀产物由Cu2O和CuCl2组成,QSn6.5-0.1锡青铜的腐蚀产物由Cu2O,CuCl2和Cu2Cl(OH)3组成.

参考文献

[1] David A,Shi X.Corros Sci,2005; 47:2335
[2] Zhou J L,Li X G,Cheng X Q,Dong C F,Du C W,Lu L.Corros Sci Prot Technol,2010; 22:47(周建龙,李晓刚,程学群,董超芳,杜翠薇,卢琳.材料腐蚀与防护技术,2010; 22:47)
[3] Schumacher M.Sea Water Corrosion Handbook.New Jersey:Park Ridge,1979:150
[4] Dexter S C.Handbook of Oceanographic Engineering Materials.New York:Whiley-Interscience,1979:23
[5] Dexter S C.Corrosion,1980; 36: 423
[6] Sparks C P,Cabillic J P,Schawann J C.J Energy ResourTrans ASME,1983; 105:282
[7] Laque F L.Marine Corrosion.London:John Wiley and Sons Inc.,1975:40
[8] Chandler K A.Marine and Offshore Corrosion (Marine Engineering Series).London:Butter worth,1985:72
[9] Warren A B.J Mar Res,1982; 40:823
[10] Sawant S S,Venkat K,Wagh A B.Indian J Technol,1993;31:862
[11] Venkatesan R,Venkataswamy M A,Bhaskaran T A,Dwarakadasa E S,Ravindran M.Br Corros J,2002; 37:257
[12] Venkatesan R,Dwarakadasa E S,Ravindran M.Corros Prev Control,2004; 51:98
[13] Heiser J,Soo P.Corrosion of Barrier Materials in Seawater Environments.New York:Long Island,1995:23
[14] Fischer K P,Espelid B,Schei B.Corrosion 2001.Houston:NACE,2001:Paper No.01013
[15] Fischer K P.Corrosion 99.Houston:NACE,1999:Paper No.361
[16] Chen S,Hatt W,Wolfson S.Corrosion,2003; 59:721
[17] Akio K.Corros Sci,2005; 47:2361
[18] Mohammed R,Timothy J D.Int J Fatigue,2008; 30:2220
[19] Blundy R F,Shreir L L.Corros Sci,1977; 17:509
[20] Venkatesan R.PhD Dissertation,Indian Institute of Science,Bangalore,2000
[21] Beccaria A M,Fiordiponti P,Mattogno G.Corros Sci,1989; 29:403
[22] Beccaria A M,Poggi G,Arfelli M,Mattogno G.Corros Sci,1993; 34:989
[23] Beccaria A M,Poggi G,Gingaud D,Castello P.Br Corros J,1994; 29:65
[24] Beccaria A M,Poggi G.Br Corros J,1985; 20:183
[25] Zhu X L,Li L Y,Xu J.Chin J Nonferrous Met,1998; 8(suppl 1):210(朱小龙,林乐耘,徐杰.中国有色金属学报,1998;8(增刊1):210)
[26] Langenegger E E,Robinson F P A.Corrosion,1969; 25:137
[27] Namboodhirl T K G,Chaudhary R S,Prakash B,Agrawal M K.Corros Sci,1982; 22:1037
[28] Li Y,Zhu Y L.Corros Prot,2006; 27:222(李勇,朱应禄.腐蚀与防护,2006; 27:222)
[29] Kear G,Barker B D,Stokes K R,Walsh F C.Electrochim Acta,2007; 52:2343
[30] Strandberg H,Johansson L G.J Electrochem Soc,1998;145:1093
[31] Nunea L,Reguera E,Corvo F,Gonzalez E,Vazquez C.Corros Sci,2005; 47:461
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%