以纳米TiO2为原料, 通过煅烧反应制备了纳米KTi6O13晶须, 对晶须合成中温度和时间诱导的相变、形态演化和生长机理等进行了原位研究. 结果表明: 纳米TiO2作原料可显著降低晶须合成温度, 适宜的煅烧温度为900~1100℃. 形态演化观察和高温XRD分析表明: KTi6O13晶须的相变及生长对温度极为敏感, 形态演化是基于初期爆发式的相变和随后串并联式的长大. KTi6O13晶须的生长遵守本研究提出的串并联机制, 晶须轴向的生长台阶是串并联生长的直接结果.
The present work was aimed at in-situ studies of temperature and time induced phase transition, morphologic evolution, growth mechanism, and microstructure of KTi6O13 nano-whiskers synthesized by calcination reaction using nanometer TiO2 as the starting material. The experimental results indicate that the use of nanometer TiO greatly reduces calcination temperature with a suitable calcination temperature range of 900~1100℃. Observation of morphologic evolution and dynamic HTXRD analysis show that the phase transition and growth of KTi6O13 whiskers are quite sensitive to calcination temperature, and the morphologic evolution of KTi6O13 whiskers is mainly based on the fulminous phase transition at the initial stage and subsequent concatenation-parallel growth in length and diameter. The growth of KTi6O13 whiskers follows the concatenation-parallel growth mechansim developed in this study, which directly results in the formation of growth steps along the axis of the whiskers.
参考文献
| [1] | Bao N Z, Shen L M, Feng X, et al. Journal of the American Ceramic Society, 2004, 87 (3): 326--330. [2] Choy J H, Han Y S. Materials Letters, 1998, 34: 111--118. [3] 刘玉明(LIU Yu-Ming). 无机材料学报(Journal of Inorganic Materials), 1994, 9 (1): 83--88. [4] 韩培德, 梁建, 于愿, 等. 稀有金属材料与工程, 2005, 34 (1): 56--59. [5] Sun X M, Chen X, Li Y D. Inorganic Chemistry, 2002, 47: 4996--4998. [6] 付敏, 江志东, 马紫峰(FU Min, et al).无机材料学报(Journal of Inorganic Materials), 2005, 20 (4): 808--814. [7] 刘峰, 向兰, 金涌(LIU Feng, et al). 无机材料学报(Journal of Inorganic Materials), 2004, 19 (4): 784--788. [8] Lee C T, Um M H, Kumazawa H. Journal of the American Ceramic Society, 2000, 83 (5): 1098--1102. [9] Bao N Z, Feng X, Lu X H, et al. Journal of Materials Science, 2002, 37: 3035--3043. [10] Li G L, Liu M, Wang G H. Journal of materials research, 2001, 16 (12): 3614--3620. [11] 申玉田. KTinO2n+1/Ti合金的制备、微结构及其生物医学特性研究. 天津: 河北工业大学博士毕业论文, 2003. 66--68. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%