欢迎登录材料期刊网

材料期刊网

高级检索

热障涂层(TBCs)具有良好的隔热性能,是航空发动机和燃气轮机高温部件的关键材料.在高温服役状态,涂层的剥落会导致严重的问题,因此涂层的失效机理是热障涂层研究中急需解决的关键问题.除了受到热应力的影响以外,涂层的失效还受到热生长氧化物(TGO)的生成和长大的影响,本文介绍了粘结层的氧化、TGO的生成和长大以及微裂纹的产生、扩展、直到剥离脱落的整个失效过程;探讨了影响热障涂层失效的若干因素,并对其进行的各种改性研究进行了概述,分析总结了热障涂层失效相关研究的发展趋势.

参考文献

[1] Byon E S,Zhang S H,Lee S H,et al.Effect of ion implantation on growth of thermally grown oxide in MCrAlY coating for TBC.Surf.Coat.Technol.,2010,205:S435-S438.
[2] Xin W,Atkinson A,Chirivì L,et al.Nicholls,evolution of stress and morphology in thermal barrier coatings.Surf.Coat.Technol.,2010,204(23):3851-3857.
[3] Chen Z B,Wang Z G,Zhu S J.Tensile fracture behavior of thermal barrier coatings on superalloy.Surf Coat.Technol.,2011,205(15):3931-3938.
[4] Yu Q H,Abdul R,Wang N,et al.Thermal properties of plasma-sprayed thermal barrier coating with bimodal structure.Ceram.Int.,2011,37(3):1093-1099.
[5] Trunova O,Beck T,Herzog R,et al.Damage mechanisms and lifetime behavior of plasma sprayed thermal barrier coating systems for gas turbines-Part Ⅰ:experiments.Surf.Coat.Technol.,2008,202(20):5027-5032.
[6] He J H,Schoenung J M.Nanostructured coatings.Mater.Sci.Eng.A,2002,336(1/2):274-319.
[7] David R Clarke.Materials selection guidelines for low thermal conductivity thermal barrier coatings.Surf.Coat.Tech.,2003,163-164:67-74.
[8] LIANG Bo,CAI An,CHEN Huang,et al.Thermophysical properties of air plasma sprayed zirconia coating deposited by reconstituted nanosize particles.Journal of Inorganic Materials,2010,25(7):695-699.
[9] Zhao H B,Yu F,Bennett T D,etal.Morphology and thermal conductivity of yttria-stabilized zirconia coatings.Acta.Mater.,2006,54(19):5195-5207.
[10] Cernuschi F,Ahmaniemi S,Vuoristo P,et al.Modelling of thermal conductivity of porous materials:application to thick thermal barrier coatings.Z Eur.Ceram.Soc.,2004,24(9):2657-2667.
[11] Jang B K,Matsubara H.Influence of porosity on thermophysical properties of nano-porous zirconia coatings grown by electron beamphysical vapour deposition.Scripta.Mater.,2006,54(9):1655-1663.
[12] LIANG Bo,DING Chuan-Xian.Microstructure of nanostructured zirconia coating and its thermal shock resistance.Journal oflnorganic Materials,2006,21(1):250-256.
[13] Kitazawa R,Tanaka M,Kagawa Y,et al.Damage evolution of TBC system under in-phase thermo-mechanical tests.Mater.Sci.Eng.B,2010,173(1/2/3):130-134.
[14] 周洪,李飞,何博.热障涂层材料研究进展.材料导报,2006,20(10):40-44.
[15] Karaoglanli A C,Altuncu E,Ozdemi I,et al.Structure and durability evaluation of YSZ+Al2O3 composite TBCs with APS and HVOF bond coats under thermal cycling conditions.Surf.Coat.Technol.,2011,205:S369-S373.
[16] Sampath S,Jiang X.Splat formation and microstructure development during plasma spraying deposition temperature effects,.Mater.Sci.Eng.,2001,304-306:144-150.
[17] Friis M,Persson C,Wigren J.Influence of particle in-flight characteristics on the microstructure of atmospheric plasma sprayed Yttria stabilized ZrO2.Surf Coat.Technol.,2001,141(2/3):115-127.
[18] 胡浩炬,张建宇,杨晓光.等离子热障涂层失效机理的数值分析研究.航空动力学报,2010,5(25):1085-1091.
[19] Xie W G,Jordan E,Gell M.Stress and cracking behavior of plasma sprayed thermal barrier coatings using an advanced constitutive model.Mater.Sci.Eng.A,2006,419(1/2):50-58.
[20] Bartsch M,Baufeld B,Dalkilic S,et al.Fatigue cracks in a thermal barrier coating system on a superalloy in multiaxial thermomechanical testing.Int.Z Fatigue,2008,30(2):211-218.
[21] 周益春,刘奇星,杨丽,等,热障涂层的破坏机理与寿命预.固体力学学报,2010,5:504-530.
[22] Courcier C,Maurel V,Rémy L,et al.Interfacial damage based life model for EB-PVD thermal barrier coating.Surf.Coat.Technol.,201 1,205(13/14):3763-3773.
[23] Kakuda T R,Limarga A M,Bennett T D,et al.Evolution of thermal properties of EB-PVD YSZ thermal barrier coatings with thermal cycling.Acta Mater.,2009,57:2583-2591.
[24] Tzimsas E,Mullejans H,Peteves S D,et al.Failure of thermal barrier coating systems under cyclic thermo mechanical loading.Acta Mater,2000,48:4699-4707.
[25] B(a)ker M,R(o)sler J,Affeldt E.The influence of axial loading on the interface stresses of thermal barrier coatings.Comput.Mater.Sci.,2009,47(2):466-470.
[26] 胡传顺,王福会,吴维.热障涂层研究进展.腐蚀科学与防护技术,2000,12(3):160-163.
[27] 霍晓,沈文雁,陈孟成,等.静态氧化过程中热障涂层的剥落机理.航空材料学报,1999,19(2):20-26.
[28] Fox A C,Clyne T W.Oxygen transport by gas permeation through the zirconia layer in plasma sprayed thermal barrier coatings.Surf.Coat.Technol.,2004,184(2/3):311-321.
[29] Beck T,Herzog R,Trunova O,et al.Damage mechanisms and lifetime behavior of plasma-sprayed thermal barrier coating systems for gas turbines-Part Ⅱ:modeling.Surf.Coat.Technol.,2008,202(24):5901-5908.
[30] Kim D J,Shin I H,Koo J M,et al.Failure mechanisms of coin-type plasma-sprayed thermal barrier coatings with thermal fatigue.Surf.Coat.Technol.,2010,205:S451-S458.
[31] Strangman T E.Ceramic Thermal Barrier Coating with Alumina Interlayer.US Patent,4880614.1990.
[32] 李美栓,孙晓峰,张重远,等.EB-PVD热障涂层热循环过程中粘结层的氧化和相结构.金属学报,2002,38(1):79-83.
[33] 李美栓.金属的高温腐蚀.北京:冶金工业出版社,2001:167-178.
[34] 王洪,张坤,陈光南.界面形貌对热障涂层界面残余应力影响的数值模拟.金属热处理,2001,26(9):44-46.
[35] Dong Z L,Khor K A.Microstructure formation in plasma-sprayed functionally graded NiCoCrAlY yttria-stabilized zirconia coatings.Surf.Coat.Technol.,1999,114(2/3):181-186.
[36] Teixeira V.Numerical analysis of the influence of coating porosity and substrate elastic properties on the residual stresses in high temperature graded coatings.Surf.Coat.Technol.,2001,79(2):146-147.
[37] 刘社宁.热障涂层TGO生长机制与涂层失效机制的研究.天津:河北工业大学硕士论文,2008.
[38] 陈和兴.镍基合金基体热障涂层界面扩散和反应的研究.长沙:中南大学博士论文,2004.
[39] Tolpygo V K,Clarke D R,Murphy K S.Oxidation-induced failure of EB-PVD thermal barrier coatings.Surf.Coat.Technol.,2001,146-147:124-131.
[40] Nusier S Q,Newaz G M,Chaudhury Z A.Experimental and analytical evaluation of damage processes in thermal barrier coatings.Int.J.Solid Struct.,2000,37(18):2495-2506.
[41] Mumm D R,Evans A G.On the role of imperfections in the failure of a thermal barrier coating made by electron beam deposition.Acta mater.,2000,48(8):1815-1827.
[42] Bi X F,Xu H B,Gong S K.Investigation of the failure mechanism of thermal barrier coatings prepared by electron beam physical vapor deposition.Surf.Coat.Technol.,2000,130(2):122-127.
[43] Trunova O,Beck T,Herzog R,et al.Damage mechanisms and lifetime behavior of plasma sprayed thermal barrier coating systems for gas turbines-Part Ⅰ:experiments.Surf.Coat.Technol.,2008,202(20):5027-5032.
[44] 2hou Z H,Guo H B,Wang J,et al.Microstructure of oxides in thermal barrier coatings grown under dry/humid atmosphere.Corros.Sci.,2011,S3(8):2630-2635.
[45] Quadakkers W J,Shemet V,Sebold D,et al.Oxidation characteristics of a platinized MCrAlY bond coat for TBC systems during cyclic oxidation at 1000℃.Surf.Coat.Technol.,2005,199(1):77-82.
[46] Yanar N M,Pettit F S,Meier G H.Failure characteristics during cyclic oxidation of Yttria stabilized zirconia thermal barrier coatings deposited via electron beam physical vapour deposition on platinum aluminide and on NiCoCrAlY bond coat with processing modifications for improved performances.Metall.Mater.Trans.,2006,37:1563-1580.
[47] Guo H B,Sun L D,Li H F,et al.High temperature oxidation behaviour of hafnium modified NiAl bond coat in EB-PVD thermal barrier coating system.Thin Solid Films.,2008,516(16):5732-5735.
[48] Guo H B,Cui Y J,Peng H,et al.Improved cyclic oxidation resistance of electron beam physical vapour deposited nano-oxide dispersed b-NiAl coatings for Hf-containing superalloy.Corros.Sci.2010,52(4):1440-1446.
[49] Schulz U,Fritscher K,Ebach-Stahl A.Cyclic behavior of EB-PVD thermal barrier coating systems with modified bond coats.Surf.Coat.Technol.,2008,203(5/6/7):449-455.
[50] Guo H B,Wang X Y,Li J,et al.Effects of Dy on cyclic oxidation resistance of NiAl alloy.T.Nonferrous Metal.Soc.,2009,19(5):1185-1189.
[51] Liu J,Byeon J W,Sohn Y H.Effects of phase constituentS/microstructure of thermally grown oxide on the failure of EB-PVD thermal barrier coating with NiCoCrAlY bond coat.Surf.Coat.Technol.,2006,200(20/21):5869-5876.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%