欢迎登录材料期刊网

材料期刊网

高级检索

利用碳热还原法成功制备了碳包覆Li3V2(PO4)3正极材料.X射线衍射研究表明材料具有纯相单斜结构.高分辨透射电子显微镜观察到材料表面存在5~ 10 nm的包覆碳层.碳包覆Li3V2(PO4)3材料在3.0~4.3V电压区间内可提供120 mA· h/g(C/4倍率)、115mA·h/g(1C倍率)和110mA·h/g(2C倍率)的可逆容量,并且在循环300次后容量保持率超过97%,显示出良好的应用前景.该材料在充放电循环初期经历了不可逆容量损失.高分辨透射电子显微镜研究表明,该不可逆容量损失来源于材料表面生成的固体电解质中间相(SEI膜),红外光谱分析表明,SEI膜的成份主要包括ROCO2Li和RCO2Li等有机物,以及Li2CO3、LixPFy和LixPOyFz等无机物.表面SEI膜经历初期电化学循环后趋于稳定,从而保证碳包覆Li3V2(PO4)3正极材料优良的电化学性能.

参考文献

[1] Yamada A,Chung S C,Hinokuma K.Optimized LiFePO4 for Lithium Battery Cathodes[J].J Electrochem Soc,2001,148:A224-A229.
[2] Yin S C,Strobel P S,Grondey H,et al.Li2.5V2 (PO4)3:A Room-temperature Analogue to the Fast-ion Conducting High-temperature Gamma-phase of Li3V2 (PO4) 3[J].Chem Mater,2004,16:1456-1465.
[3] Chen Q Q,Wang J M,Tang Z,et al.Electrochemical Performance of the Carbon Coated Li3V2 (PO4) 3 Cathode Material Synthesized by a Sol-gel Method[J].Electrochim Acta,2007,52:5251-5257.
[4] Chen Z Y,Dai C S,Wu G,et al.High Performance Li3V2 (PO4)3/C Composite Cathode Material for Lithium Ion Batteries Studied in Pilot Scale Test[J].Electrochim Acta,2010,55:8595-8599.
[5] Rui X H,Yesibolati N,Chen C H.Li3V2 (PO4)3/C Composite as An Intercalation-type Anode Material for Lithium-ion Batteries[J].J Power Sources,2011,196:2279-2282.
[6] Matsuta S,Kato Y,Ota T,et al.Electron-spin-resonance Study of the Reaction of Electrolytic Solutions on the Positive Electrode for Lithium-ion Secondary Batteries[J].J Electrochem Soc,2001,148:A7-A10.
[7] Dupré N,Martin J F,Oliveri J,et al.Aging of the LiNi1/2 Mn1/2O2 Positive Electrode Interface in Electrolyte[J].J Electrochem Soc,2009,156:C180-C185.
[8] Yang L,Ravdel B,Lucht B.Inhibition of Electrolyte Oxidation in Lithium Ion Batteries with Electrolyte Additives[J].Electrochem Solid-State Lett,2010,13:A95-A97.
[9] Koltypin M,Aurbach D,Nazar L F,et al.More on the Performance of LiFePO4 Electrodes-The Effect of Synthesis Route,Solution Composition,Aging,and Temperature[J].J Power Sources,2007,174:1241-1250.
[10] Fu P,Zhao Y M,An X N,et al.Structure and Electrochemical Properties of Nanocarbon-coated Li3V2 (PO4)3 Pepared by Sol-gel Method[J].Electrochim Acta,2007,52:5281-5285.
[11] Rui X H,Li C,Chen C H.Synthesis and Characterization of Carbon-coated Li3 V2 (PO4) 3 Cathode Materials with Different Carbon Sources[J].Electrochim Acta,2009,54:3374-3380.
[12] Jiang T,Pan W C,Wang J,et al.Carbon Coated Li3 V2 (PO4)3 Cathode Material Prepared by a PVA Assisted Sol-gel Method[J].Electrochim Acta,2010,55:3864-3869.
[13] Burba C M,Frech R.Vibrational Spectroscopic Studies of Monoclinic and Rhombohedra Li3V2 (PO4)3[J].Solid State Ionics,2007,177:3445-3354.
[14] Koltypin M,Aurbach D,Nazar L F,et al.On the Stability of LiFePO4 Olivine Cathodes Under Various Conditions (Electrolyte Solutions,Temperatures)[J].Electrochem Solid-State Lett,2007,10:A40-A42.
[15] Aurbach D,Gamolsky K,Markovsky B,et al.The Study of Surface Phenomena Related to Electrochemical Lithium Intercalation into LixMOy Host Materials(M =Ni,Mn)[J].J Electrochem Soc,2000,147:1322-1331.
[16] Shu J.Study of the Interface Between Li4Ti5O12 Electrodes and Standard Electrolyte Solutions in 0.0 ~ 0.5 V[J].Electrochem Solid-State Lett,2008,12:A238-A240.
[17] Dupre N,Martin J F,Oliveri J,et al.Relationship Between Surface Chemistry and Electrochemical Behavior of LiNi1/2Mn1/2O2 Positive Electrode in A Lithium-ion Battery[J].J Power Sources,2011,196:4791-4800.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%