在 TFT-LCD 行业,PECVD 设备主要用于 Array TFT 基板工艺中的气相沉积；产生的非金属膜层,为金属电路提供保护、开关作用；在 PECVD 工艺制程中,腔体设计复杂,反应条件苛刻,产生的制程物会造成产品不良,故需要定期进行 PM(pre maintenance 预防性维护)。本文以 PECVD PM 作业为背景,针对设备 PM 耗时长的问题,制定了改善方法,并着重介绍了腔体检漏工具的设计过程。设计制作了一台国产化检漏工具,成功运用于量产。通过测试,检漏工具3 min 内达到10 mT(1 mT＝0．133 Pa),漏率为0．45 mT/min,基本符合设备 Spec．(标准)要求。
In TFT - LCD industry,PECVD equipment is mainly used for the vapor deposition in the process of Array TFT to produce non-metal film layer,which protects and switches metal circuit .In PECVD process,cavity design is complex and reaction conditions are harsh,the process will lead to bad products,so we need to do pre-maintenance on a regular basis.On the background of PECVD PM,we improved the method and emphatically introduced the cavity check-up leak tool design process because of the time-consuming of PM.We designed a domestic leak detection tool,and applied it into mass producing successfully.Final test results showed that pressure reached to 10 mT in 3 min and the leakage rate is 0.45 mT/min,which accord with the equipment standard.
参考文献
| [1] | 谢振宇 .a-Si TFT用氮化硅薄膜的制备及其性能研究[D].电子科技大学,2007. |
| [2] | 陶涛,苏辉,谢自力,张荣,刘斌,修向前,李毅,韩平,施毅,郑有炓.PECVD法氮化硅薄膜生长工艺的研究[J].微纳电子技术,2010(05):267-272,303. |
| [3] | 张晓情,李沛林,王敬松,杨建红.PECVD淀积Si_3N_4作为光刻掩膜版的保护膜[J].半导体技术,2009(11):1096-1098. |
| [4] | 翟军华,苏通.液晶面板制造业中制造执行系统的设计与实现[J].液晶与显示,2014(01):60-64. |
| [5] | 王卫刚,周炳海.快速换模技术的实践研究[J].机床与液压,2007(05):4-6,32. |
| [6] | 姜波.真空检漏在维修中的应用[J].机械制造,2006(04):65-67. |
| [7] | 唐柱才 .冲击载荷下结构动态屈曲的数值研究[D].大连理工大学,2004. |
| [8] | 刘洋 .平板式PECVD设备布气系统的分析和优化[D].东北大学,2009. |
| [9] | 陈素君,杨静.真空镀膜设备真空系统主泵的配置[C].真空工程学术交流会,2009,33:156-163. Chen S J,Yang J.The configuration of main pump of vacuum system for vacuum coating equipment [C].Vacuum Engineering Academic Communication,2009,33:156-163.(in Chinese),2009. |
| [10] | 陈素君.真空镀膜设备抽气系统的性能要求及主泵的选择[D].中国真空学会第六届全国会员代表大会暨学术会议论文摘要集,2004,13:156-163. Chen S J.The performance requirements of extraction system for vacuum coating equipment and the selection of main pump.[C].Member of Chinese vacuum society the sixth national congress and academic conference paper sets of,2004,13:156-163.(in Chinese),2004. |
| [11] | 闫建云,张俊锋,李邵亮.介绍一种新型真空阀[J].中国铸造装备与技术,2007(02):50-51. |
| [12] | 陈同沛.新型的真空阀门与真空零部件[J].真空与低温,1988,18(5):170-173. Chen T P.New types of vacuum valves and components [J].J ournal of Vacuum and Low Temperature,1988, 18(5):170-173.(in Chinese),1988. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%