欢迎登录材料期刊网

材料期刊网

高级检索

综述了近年来国内外对环氧树脂及涂料的增韧改性的研究进展及应用动态,探讨了几种增韧改性工艺的机理和特点.

This article has reviewed the research progress and the application status in modification of tenacity of epoxy resin and paint at home and abroad recently,and discussed the mechanism and features of some modifications of tenacity.

参考文献

[1] Chun Wei;Song Ting Tan;Xia Yu Wang;Ming Qiu Zhang;Han Min Zeng .Effects of liquid crystalline polyurethane on the structure and properties of epoxy[J].Journal of Materials Science Letters,2002(9):719-722.
[2] 李桂林.环氧树脂与环氧涂料[M].北京:化学工业出版社,2003:96-97,374.
[3] 吴宗汉.高性能防腐涂料的进展及应用[J].涂料工业,2007(01):45-49.
[4] 常鹏善,左瑞霖,王汝敏,陈立新.环氧树脂增韧改性新技术[J].中国胶粘剂,2002(02):37-40.
[5] 谭周琴.低黏度环氧树脂增韧固化剂[J].涂层新材料,2005(06):1-3.
[6] 李子东.快速固化的聚醚胺固化剂[J].粘接,2006(04):16.
[7] BENNETF G S;FARRIS R J;THOMPSON S A .Amine terminated poly (aryl ether ketone)-epoxy amine resin systems as tough high performance[J].POLYMER,1991,32:1633.
[8] 张海鹏,郑佩,张崇耿.绝热层环氧树脂体系增韧和低温性能研究[J].粘接,2006(06):20-21.
[9] 罗延龄,薛丹敏.活性瑞基液体橡胶增韧环氧树脂研究概况[J].石化技术与应用,2001(05):316-320.
[10] QCHI M;TAKEMIYA K;KIYOHARA O et al.Effect of the addition ofaramid-silicome block copolymer on the phase struture and toughhess of cured expoxy resins modified with RTV silicone[J].Polymer,2004,41:195.
[11] GARY T DECKER;GERALD A GORNOWICZ .High modulus siilcones as toughening agents for epoxy resin[P].US,5262 507,1993-11-16.
[12] 黎艳,刘伟区,宣宜宁.硅烷/聚硅氧烷化学改性双酚A型环氧树脂研究[J].中国塑料,2004(08):40-43.
[13] 张斌,刘伟区.聚硅氧烷共聚改性环氧树脂[J].广州化学,2002(03):54-58.
[14] Harani H.;Bakar M.;Fellahi S. .Toughening of epoxy resin using synthesized polyurethane prepolymer based on hydroxyl-terminated polyesters[J].Journal of Applied Polymer Science,1998(13):2603-2618.
[15] MAHESH K P O;ALAGAR M;ANANDA KUMAR S .Mechanical and morphological behavior of bismaleimide modified polyurethaneepoxy IPN matrictus[J].Polymers For Advanced Technologies,2003,14:137-146.
[16] 孙涛,官建国,余剑英,苏良碧.端氨基聚氨酯的合成及增韧环氧树脂的研究[J].高分子材料科学与工程,2005(01):117-120,124.
[17] 李瑛,茅素芬.环氧树脂/聚氨酯半互穿网络聚合物的研究Ⅰ.玻璃化转变行为及其形态结构[J].高分子材料科学与工程,1997(02):72-75.
[18] Mimura K. .Improvement of thermal and mechanical properties by control of morphologies in PES-modified epoxy resins[J].Polymer: The International Journal for the Science and Technology of Polymers,2000(12):4451-4459.
[19] SEUNGHAN SHIN;JYONGSIK JANG .Toughhess improvement of high-performance epoxy resin using aminated polyetherimide[J].Journal of Applied Polymer Science,1987,65:2237-2246.
[20] WU H.;XU J.;LIU Y.;HEIDEN P. .Inestigation of Readily Processable Thermoplastic-Toughened Thermosets. V. Epoxy Resin Toughened with Hyperbranched Polyester[J].Journal of Applied Polymer Science,1999(2):151-163.
[21] 戴李宗.热塑性工程塑料对环氧树脂增韧改性研究[J].热固性树脂,1997(04):37.
[22] 王晓洁,张炜,谢群炜.热塑性树脂改性环氧基体配方研究[J].宇航材料工艺,1999(02):21-23.
[23] ZHANG BAOLONG;LIAO S W.Modification of EP by acrylic copolymers with side chained mesogenic units[J].Science,1999(71):177-184.
[24] ADAMS J H .Analysis of the nonvolatile oxidation products of polypropylene thermal oxidation[J].Polym Sci Polymchem,1970,8(05):1077-1090.
[25] 韦春,谭松庭,王霞瑜.反应型液晶聚合物改性环氧树脂性能的研究[J].高分子材料科学与工程,2003(01):168-171.
[26] 黄增芳,谭松庭,王霞瑜.热致性液晶聚酯的合成及与环氧树脂共混物的性能研究[J].中国塑料,2003(12):32-35.
[27] 常鹏善 .液晶环氧增韧环氧树脂基体的研究[D].西北工业大学,2001.
[28] CAO Y M;SUN J;YU D M.[A].,2000:903-904.
[29] Ke Wang;Ling Chen;W Jingshen Wu;Mei Ling Tov;Chaobin He;Albert F.Yee .Epoxy Nanocomposites with Highly Exfoliated Clay:Mechanical Properties and Fracture Mechanisms[J].Macromolecules,2005(3):788-800.
[30] 刘竞超,李小兵,张华林,杨亚辉,傅万里.纳米二氧化硅增强增韧环氧树脂的研究[J].胶体与聚合物,2000(04):15-17.
[31] 董元彩,孟卫,魏欣,杨绪杰,陆路德,汪信.环氧树脂/二氧化钛纳米复合材料的制备及性能[J].塑料工业,1999(06):37-38.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%