为了提高丁苯乳液涂膜力学性能,用硅烷偶联剂(KH-570)改性纳米TiO2,采用半连续种子乳液聚合法,制备TiO2/聚丁苯(PSB)复合乳液.采用FF-IR,TEM表征TiO2/PSB复合乳液乳胶粒子结构,结果表明合成了以TiO2为核的核壳结构纳米TiO2/PSB乳胶粒子.探讨了纳米TiO2、乳化剂、电解质、引发剂及增稠剂用量、聚合时间与温度、单体配比等对TiO2/PSB复合乳液性能的影响.确立了适宜的聚合工艺条件:纳米TiO2、乳化剂用量分别为总质量的0.5%和3.5%,电解质和引发剂用量为单体质量的0.4%,聚合温度和时间分别为64℃和3.5 h,可制备出高固高黏且性能优良的复合乳液.经纳米TiO2改性的PSB复合乳液涂膜性能较未改性的,在黏度、硬度、耐冲击性、耐洗刷性、附着力及耐水性等方面均有明显改善.
参考文献
| [1] | CHAUDHARI C V;BHARDWAJ Y K;PATIL N D et al.Radia-tion-induced vulcanisation of natural rubber latex in presence of styrene-butadiene rubber latex[J].Radiation Physics and Chemis-try,2005,72(05):613-618. |
| [2] | Gerardo Martinez Delfa;Alejandro Olivieri;Carlos E. Boschetti .Multiple response optimization of styrene-butadiene rubber emulsion polymerization[J].Computers & Chemical Engineering: An International Journal of Computer Applications in Chemical Engineering,2009(4):850-856. |
| [3] | Wei, R.;Luo, Y.;Li, Z. .Synthesis of structured nanoparticles of styrene/butadiene block copolymers via RAFT seeded emulsion polymerization[J].Polymer: The International Journal for the Science and Technology of Polymers,2010(17):3879-3886. |
| [4] | Tang, EJ;Tian, BY;Fu, CY .Apparent kinetic study of latex interpenetrating polymer networks P(ethyl acrylate)/P(styrene) and P(styrene)/P (ethyl acrylate) by two stage emulsion polymerization[J].Colloids and Surfaces, A. Physicochemical and Engineering Aspects,2009(1/3):7-11. |
| [5] | L. Jong;S.C. Peterson .Effects of soy protein nanoparticle aggregate size on the viscoelastic properties of styrene-butadiene composites[J].Composites. Part A, Applied science and manufacturing,2008(11):1768-1777. |
| [6] | 杨磊,沈高扬,傅丽君.核壳结构纳米TiO2/PMMA/PU复合基耐洗刷涂料的制备[J].涂料工业,2009(06):25-28. |
| [7] | K.K. Suma;Sinto Jacob;Rani Joseph .Studies on the effect of nano-TiO_2 on vinyl acetate-butyl acrylate latex-based surface coating[J].Materials Science & Engineering, B. Solid-State Materials for Advanced Technology,2010(1/3):254-258. |
| [8] | INES DE F A;MARIZ;JOSE C;DE LA CAI et al.Control of parry ticle size distribution for the synthesis of small particle size high solid content latexes[J].Polymer,2010,51(18):4044-4052. |
| [9] | Stuart C.Thickett;Robert G.Gilbert .Emulsion polymerization:State of the art in kinetics and mechanisms[J].Polymer: The International Journal for the Science and Technology of Polymers,2007(24):6965-6991. |
| [10] | Ai, Z.;Deng, R.;Zhou, Q.;Liao, S.;Zhang, H. .High solid content latex: Preparation methods and application[J].Advances in colloid and interface science,2010(1):45-59. |
| [11] | Alain Guyot;Katharina Landfester;F.Joseph Schork .Hybrid polymer latexes[J].Progress in Polymer Science,2007(12):1439-1461. |
| [12] | MAHDAVIAN A R;ABDOLLAHI M .The comparison between ini-tial charge,shot and modified shot processes and their effects on macrostructure of particles in emulsion copolymerization of styrene-butadiene-arylic acid[J].Reactive and Functional Polymers,2006,66(02):247-254. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%