用W粉和Ti粉作原料, 采用惰性气体热压法制备W/Ti合金靶材. 研究了靶材致密性、富Ti的β相含量、微观结构均匀性与工艺条件的关系. 结果表明, 控制温度在1250~1450 ℃之间, 压力在20 Mpa左右, 保温时间在30 min左右可制备高性能的W/Ti合金靶材.
参考文献
[1] | 翁寿松 .铜布线及其设备[J].电子工业专用设备,1999,28(03):13. |
[2] | 张国海,夏洋,龙世兵,钱鹤.ULSI中铜互连线技术的关键工艺[J].微电子学,2001(02):146-149. |
[3] | 王弘英,刘玉岭,郝景晨,魏碧华.ULSI制备中铜布线的两步抛光技术[J].半导体学报,2003(04):433-437. |
[4] | 庞恩文,林晶,汪荣昌,戎瑞芬,宗祥福.铜布线工艺中阻挡层钽膜的研究[J].固体电子学研究与进展,2002(01):78-81. |
[5] | Glebovsky VG.;Baranov VV.;Sackovich EL.;Yaschak VY. .PROPERTIES OF TITANIUM-TUNGSTEN THIN FILMS OBTAINED BY MAGNETRON SPUTTERING OF COMPOSITE CAST TARGETS[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,1995(1):1-6. |
[6] | Jonsson L B;Hedlund C;Katardjiev I V et al.Compositional variations of sputter deposited Ti/W barrier layers on substrates with pronounced surface topography[J].Thin Solid Films,1999,348:227. |
[7] | Lai Jianwen;Pan Hongfang .The barrier characteristics on silicon of titanium-tungsten films of different compositions[J].Journal of Electronic Materials,1987,16(03):195. |
[8] | 张青来,贺继弘.溅射靶材综述[J].上海钢研,2002(04):30-41. |
[9] | Udler D;Marpx D;Murphy G.Tungsten-titanium sputtering target technology[J].MRC Technical Note,1990 |
[10] | Daniel R;John C;Jinghong Shi.Tungsten titanium targets for VLSI device fabrication[J].MRC Technical Note,1994 |
[11] | Wickersham C E.Particle contamination during sputter deposition of W-Ti films[J].Journal of Vacuum Science and Technology,1992 |
[12] | Wickersham C E et al.Method of producing tungsten-titanium sputter targets and targets produced thereby[P].US 685789,1993. |
[13] | Massalski T B.Binary Alloy Phase Diagrams[M].Metals Park Ohio:American Society for Metals,1990 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%