在Gleeble1500热模拟实验机上对Ti-45Al-7Nb-0.15B-0.4W合金进行了恒应变速率热压缩实验. 热模拟参数分别如下: 温度为1050～1230 ℃, 变形速率为0.01 s-1, 变形量为30%. 测试了不同温度下的位移-载荷曲线, 观察了变形后的宏观与微观组织. 结果表明: 使用45#碳钢作为包套时, TiAl合金的包套热压缩温度不能低于1050 ℃, 也不能超过1230 ℃, 最优温度为1180 ℃;当包套TiAl合金的名义相对压缩量为30%时, TiAl合金块的实际最大相对压缩量为50%, TiAl合金和微观组织被拉长、压扁.
参考文献
| [1] | Slim Zghal;Marc Thomas;Alain Couret .Structural transformations activated during the formation of the lamellar microstructure of TiAl alloys[J].Intermetallics,2005(9):1008-1013. |
| [2] | Yoshihara M;Kim Y W .Oxidation behavior of gamma alloys designed for high temperature applications[J].Intermetallics,2005,13(09):952. |
| [3] | A. M. Hodge;L. M. Hsiung;T. G. Nieh .Creep of nearly lamellar TiAl alloy containing W[J].Scripta materialia,2004(5):411-415. |
| [4] | 朱浩,曹睿,张继,陈剑虹.不同卸载应力对层状TiAl基合金损伤程度的影响[J].稀有金属,2006(03):313-318. |
| [5] | Hsiung L M;Nieh T G .Microstructures and properties of powder metallurgy TiAl alloys[J].Materials Science and Engineering A-structural Materials Properties Microstructure and Processing,2004,364(1-2):1. |
| [6] | Gerling R.;Schimansky FP.;Leitgeb R. .Porosity and argon concentration in gas atomized gamma-TiAl powder and hot isostatically pressed compacts[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1998(2):239-247. |
| [7] | Beddoes J.;Au P.;Wallace W.;Zhao L. .THE BRITTLE-DUCTILE TRANSITION IN HIP CONSOLIDATED NEAR GAMMA-TIAL+W AND TIAL+CR POWDER ALLOYS[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1995(0):324-332. |
| [8] | H.Hashimoto;T.Abe .Nitrogen-induced powder formation of titanium aluminides during mechanical alloying[J].Intermetallics,2000(7):721-728. |
| [9] | Rainer Gerling;Arno Bartels;Helmut Clemens .Structural characterization and tensile properties of a high niobium containing gamma TiAl sheet obtained by powder metallurgical processing[J].Intermetallics,2004(3):275-280. |
| [10] | D. Hu .Effect of boron addition on tensile ductility in lamellar TiAl alloys[J].Intermetallics,2002(9):851-858. |
| [11] | T.T. Cheng .The mechanism of grain refinement in TiAl alloys by boron addition －－an alternative hypothesis[J].Intermetallics,2000(1):29-38. |
| [12] | Maziasz P J;Ramanujan R V;Liu C T .Effects of B and W alloying additions on the formation and stability of lamellar structures in two-phase γ-TiAl[J].Intermetallics,1997,5(02):83. |
| [13] | Jie Yang;J.N. Wang;Yong Wang .Refining grain size of a TiAl alloy by cyclic heat treatment through discontinuous coarsening[J].Intermetallics,2003(9):971-974. |
| [14] | Wang JN.;Yang J.;Xia QF.;Wang Y. .On the grain size refinement of TiAl alloys by cyclic heat treatment[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2002(0):118-123. |
| [15] | Jie Yang;J.N. Wang;Yong Wang .Control of the homogeneity of the lamellar structure of a TiAl alloy refined by heat treatment[J].Intermetallics,2001(5):369-372. |
| [16] | Zhang W J;Francesconi L;Evangelista E .A novel heat treatment to develop very fine lamellar structure in cast gamma-base TiAl alloys[J].Materials Letters,1996,27(4-5):135. |
| [17] | Bartels A.;Kestler H.;Clemens H. .Deformation behavior of differently processed gamma-titanium aluminides[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2002(0):153-162. |
| [18] | Nakamura M;Nobuki M;Tanabe T .Microstructure control and high temperature properties of TiAl base alloys[J].Intermetallics,1998,6(7-8):637. |
| [19] | Appel F;Oehring M;Paul J D H .Physical aspects of hot-working gamma-based titanium aluminides[J].Intermetallics,2004,12(7-9):791. |
| [20] | 徐丽华,徐向俊,林均品,王艳丽,宋西平,林志,陈国良,李树索,苏喜孔,韩雅芳.包套锻造对高Nb-TiAl基合金组织的影响[J].材料工程,2004(08):21-24. |
| [21] | 刘咏;黄伯云;周科朝 .TiAl基合金包套锻造工艺[J].中国有色金属学报,2000,10(z1):6. |
| [22] | Toshimitsu Tetsui;Kentaro Shindo;Satoru Kobayashi .Strengthening a high-strength TiAl alloy by hot-forging[J].Intermetallics,2003(4):299-306. |
| [23] | Toshimitsu Tetsui .Effects of high niobium addition on the mechanical properties and high-temperature deformability of gamma TiAl alloy[J].Intermetallics,2002(3):239-245. |
| [24] | Korznikova G.;Korznikov A.;Dimitrov O. .Structure and property changes in intermetallic compounds during severe plastic deformation[J].Annales de Chimie-Science des Materiaux,2002(3):35-44. |
| [25] | Li S;Han X;Xu Y .Simulation of hot deformation of TiAl based alloy containing high Nb[J].Intermetallics,2005,13(3-4):323. |
| [26] | 蒙肇斌,王延庆,尹法杰,乔雪璎,张旭瑶.GH98 合金的热加工性能[J].钢铁研究学报,2003(06):54-57,63. |
| [27] | 崔文芳,洪权,刘春明,周廉.Ti-1100/0.1Y高温钛合金等温热压缩变形行为[J].东北大学学报(自然科学版),2003(06):572-575. |
| [28] | 梁皖伦,方金凤,曹军.热模拟试验在金属热变形研究中的应用[J].理化检验-物理分册,2001(11):470-473. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%