以工程实际中应用较广的Al-Cu-Mg铝合金作为研究对象, 用Al-Cu-Mg铝合金气体雾化粉末作为原材料, 通过低温液氮球磨获得纳米晶后, 再经真空热压和热挤压制备了致密的大块体纳米材料. 通过力学性能测试, 挤压态的纳米晶Al-Cu-Mg块体材料抗拉强度达470 MPa, 经过T4处理后, 抗拉强度达到590 MPa, 远远超过常规方法制备的Al-Cu-Mg铝合金抗拉强度. 对纳米晶Al-Cu-Mg块体材料进行微观组织观察, 分析了材料强度提高的原因.
参考文献
| [1] | Perez R J;Huang B;Lavernia E J .Thermal stability of nanocrystalline Fe-10wt.% Al produced by cryogenic mechanical alloying[J].Nano-Structured Materials,1996,7(05):565. |
| [2] | David Witkin;Z. Lee;R. Rodriguez;S. Nutt;E. Lavernia .Al-Mg alloy engineered with bimodal grain size for high strength and increased ductility[J].Scripta materialia,2003(4):297-302. |
| [3] | 王尔德,胡连喜.机械合金化纳米晶材料研究进展[J].粉末冶金技术,2002(03):135-139. |
| [4] | Zhang X;Wang H;Scattergood R O;Narayan J Koch C C .Mechanical properties of cryomilled nanocrystalline Zn studied by the miniaturized disk bend test[J].Acta Materialia,2002,50:3527. |
| [5] | Lu L;Sui M L;Lu K .Cold rolling of bulk nanocrystalline copper[J].Acta Materialia,2001,49:4127. |
| [6] | Sun XC.;Reglero R.;Sun XK.;Yacaman MJ. .Microhardness of bulk and higher density nanocrystalline copper obtained by hot compaction[J].Materials Chemistry and Physics,2000(1):82-87. |
| [7] | Han B Q;Mohamed F A;Bampton C;Lavernia E J.Mechanical properties of a cryomilled nanostructured Al-Mg alloy[A].,2004:791. |
| [8] | Han B Q;Han A;Lavernia E J;Mohamed F A,Farghalli A.Mohamed .On the mechanical behavior of a cryomilled Al-Ti-Cu alloy[J].Materials and Engineering,2003,A358:318. |
| [9] | 王祝堂;田荣璋.铝合金及其加工手册[M].长沙:中南大学出版社,2000 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%