采用Gleeble-1500热模拟机进行恒温和恒速压缩变形实验,变形温度范围为400～460 ℃,应变速率为0.001～0.1 s-1.研究了Al-Cu-Mg-Ag-Zr合金在高温塑性变形过程中流变应力的变化规律,确定了合金的变形激活能Q和应力指数n.结果表明:流变速率和变形温度对合金流变应力的大小有显著影响,流变应力随变形温度的升高而降低,随应变速率的提高而增大.可用包含Arrhenius项的Zener-Hollomon参数描述该合金高温塑性变形时的流变行为.
参考文献
| [1] | Polmear I J;Pongs G .After Concorde:evaluation of creep resistance Al-Cu-Mg-Ag alloys[J].Journal of Materials Science and Technology,1999,15(08):861. |
| [2] | Kazanjian S M;Wang Ning .Creep behavior and microstructural stability of Al-Cu-Mg-Ag and Al-Cu-Li-Mg-Ag alloys[J].Materials Science and Engineering,1997,A234-236:571. |
| [3] | Pantelkis S;Kyrsandi A .Creep resistance of aluminum alloys for the next generation super-sonic civil aircrfts[J].Theoretical and Applied Fracture Mechanics,1999,31:31. |
| [4] | Polmear I J;Couper M J .Design and development of an experimental wrought aluminum alloy for use at elevated temperature[J].Metallurgical and Materials Transactions,1988,19A(04):1027. |
| [5] | Polmear I J;Chester R J .Abormal age hardening in an Al-Cu-Mg alloy containing silver and lithium[J].Scripta Metallurgica,1989,23:1213. |
| [6] | Xiao D H;Wang J N;Ding D Y;Yang H L .Effect of rare earth Ce addition on the microstructure and mechanical properties of an Al-Cu-Mg-Ag alloy[J].Journal of Alloys and Compounds,2003,352:84. |
| [7] | 宋旼,陈康华,黄兰萍.Al-Cu-Mg-（Ag）合金中时效析出相的析出及生长动力学[J].中国有色金属学报,2006(08):1313-1319. |
| [8] | 陈大钦,郑子樵,李世晨,陈志国,刘祖耀.外加应力对Al-Cu及Al-Cu-Mg-Ag合金析出相生长的影响[J].金属学报,2004(08):799-804. |
| [9] | 肖代红,王健农,丁冬雁.预拉伸处理对Al-5.3Cu-0.8Mg-0.3Ag合金性能和时效过程影响[J].热加工工艺,2003(04):1-2,5. |
| [10] | 夏卿坤,刘志义,余日成,李云涛.时效制度对Al-CU-Mg-Ag合金组织和性能的影响[J].热加工工艺,2006(18):22-24. |
| [11] | Sellars C M;McTegart W J .On the mechanism of hot deformation[J].Acta Metallurgica,1966,14(09):1136. |
| [12] | McQueen H J;Yue S;Ryan N D;Fry E .Hot working characteristics of steels in austenitic state[J].Journal of Materials Processing Technology,1995,53(1/2):293. |
| [13] | H.J. McQueen;E. Fry;J. Belling .Comparative Constitutive Constants for Hot Working of Al-4.4Mg-0.7Mn (AA5083)[J].Journal of Materials Engineering and Performance,2001(2):164-172. |
| [14] | 郑璇 .关于铝箔化学成分的探讨[J].轻合金加工技术,1993,21(01):18. |
| [15] | 李慧中,张新明,陈明安,周卓平.2519铝合金热变形流变行为[J].中国有色金属学报,2005(04):621-625. |
| [16] | 沈健.AA7005铝合金的热加工变形特性[J].中国有色金属学报,2001(04):593-597. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%