对比研究了单重时效、低温-高温双重时效、时效加热速度等工艺对经热变形后的Ti-10V-2Fe-3Al合金显微组织和力学性能的影响.结果表明:经过高温变形后的合金,在双重时效处理过程中,先析出的ω相为α相的沉淀析出提供了均匀的形核位置,使合金获得了比单重时效处理更加均匀细小的α+β显微组织,使得强度获得了较大幅度的提高;合金在较低的升温速度(0.1℃·s-1)加热过程中,细小弥散分布的等温ω相有充足的时间析出,从而为后续α相的析出提供有利的形核位置,产生细小盘状α相,获得了与双重时效相同的强化效果.
参考文献
| [1] | Srinivasan R;Weiss I;Eylon D;Boyer R R,Koss D A.Beta Titanium Alloys in the 1990's[M].PA:TMS,Warrendale,1993:283. |
| [2] | Boyer RR.;Venkatesh V.;Rack HJ. .The influence of thermomechanical processing on the smooth fatigue properties of Ti-15V-3Cr-3Al-3Sn[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1998(1/2):97-102. |
| [3] | Peng Yiqun .Mechanical Properties and Weld Properties of Beta-21S[J].are Metals,1996(2):95-100. |
| [4] | Parris W M;Bania P J;Froes F H;Caplan I.Titanium '92:Science and Technology[M].PA:TMS,Warrendale,1993:153. |
| [5] | 《稀有金属材料加工手册》编委会.稀有金属材料加工手册[M].北京:冶金工业出版社,1984:38. |
| [6] | 于兰兰,毛小南,赵永庆,张鹏省,袁少冲.热变形行为与BT22钛合金的组织演变[J].稀有金属材料与工程,2007(03):505-508. |
| [7] | Weiss I.;Semiatin SL. .Thermomechanical processing of beta titanium alloys - an overview[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1998(1/2):46-65. |
| [8] | Karasevskaya OP.;Ivasishin OM.;Semiatin SL.;Matviychuk YV. .Deformation behavior of beta-titanium alloys[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):121-132. |
| [9] | Furuhara T;Poorganji B;Abe H;Maki T Dynamic.Recovery and recrystallization in titanium alloys by hot deformation[J].JOM-Journal of the Minerals Metals and Materials Society,2007(01):64. |
| [10] | Raghuna Than S L;Stapleton A M;Dashwood R J;Jackson M Dye D.Micromechanics of Ti-10V-2Fe-3Al:In-situ synchrotron characterisation and modeling[J].Acta Mateialia,2007(55):6861. |
| [11] | 杨健.钛合金在飞机上的应用[J].航空制造技术,2006(11):41-43. |
| [12] | 曹春晓.钛合金在大型运输机上的应用[J].稀有金属快报,2006(01):17-21. |
| [13] | Allen P G;Bania P J;Hutt A J;Combres Y.Beta titanium alloya[A].London:The Institute of Materials,1996:2177. |
| [14] | 张树松.钢的强韧化机理与技术途径[M].北京:兵器工业出版社,1995 |
| [15] | 周兆锋,甘卫平.Al-Li合金强韧化机理及途径[J].轻合金加工技术,2003(06):46-49. |
| [16] | Ivasishin O M;Markovsky P E;Matviychuk Yu V;Semiatin S L Ward L H Fox S .A comparative study of the mechanical properties of high-strength β-titanium alloys[J].Journal of Alloys and Compounds,2007,14:1. |
| [17] | Bhattacharjee A;Varma V K;Kamat S V;Gogia A K Bhargava S .Influence of β grain size on tensile behavior and ductile fracture toughness of titanium alloy Ti-10V-2Fe-3Al[J].Metallurgical and Materials Transactions,2006,37A:1423. |
| [18] | Ivasishin O M;Markovsky P E;Semiatin S L;Ward C H .Aging response of coarse-and fine-grained β titanium alloys[J].Materials Science and Engineering,2005,A354:296. |
| [19] | Furuhara T;Maki T;Makino T .Microstructure control by thermomechanical processing in β-Ti-15-3 alloy[J].Journal of Materials Processing Technology,2001,117:318. |
| [20] | Clement N;Lenain A;Jacques P J.Mechanical property optimization via microstructural control of new metastable beta titanium alloys[A].JOM-Journal of the Minerals Metals and Materials Society,2007:50. |
| [21] | Wang Bo;Liu Ziquan;Gao Yuan et al.Microstructural evolution during aging of Ti-10V-2Fe-3Al titanium alloy[J].Journal of University of Science and Technology Beijing,2007,14:335. |
| [22] | William J C;Bleckbutn M J .[J].Transactions AIME,1969,245:2352. |
| [23] | 罗媛媛 .Ti-B19钛合金时效过程中的相变研究[D].西北工业大学,2006. |
| [24] | 常辉 .Ti-B19合金的固态相变动力学及其组织演变规律[D].西安:西北工业大学,2006. |
| [25] | 徐祖耀.相变原理[M].北京:科学出版社,2000 |
| [26] | 张少卿;陶春虎.Ti-10V-2Fe-3Al与Ti-10V-1Fe-1Cr-3Al合金的淬火相变及微观组织特征研究[A].北京:原子能出版社,1987:193. |
| [27] | 张喜燕;赵永庆;白晨光.钛合金及应用[M].北京:化学工业出版社,2005 |
| [28] | D'yakonova N B;Lyasotskii I V;Rodionov Yu L.Orthorhombic martensite and the ω phase in quenched and deformed titanium alloys with 20～24at.% Nb[J].Russian Metallurgy (Metally),2007(01):51. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%