采用真空烧结方法,在不同烧结温度下制备Ti-Mo(9:1)多孔合金,对材料的表面形貌和微观结构进行研究.结果表明,随着温度升高,样品由松散颗粒逐渐烧结形成多孔合金.高分辨透射电镜(HRTEM)观察发现,870和890℃烧结的样品中都有α相从β相中析出,同时还可以观察到B/βremain分解为β1+β2两相.随后的室温吸氢性能测试结果表明,大量β相的析出利于提高Ti-Mo样品的吸气性能.
参考文献
[1] | 万金玉.吸气材料[M].南京:江苏科学技术出版社,1983:9. |
[2] | 赵振梅,尉秀英,熊玉华,杜军,秦光荣.钛粉粒度对Ti-Mo吸气剂性能的影响[J].稀有金属,2008(02):185-188. |
[3] | Giogri T A;Ferraio B;Storey B .An updated review of getters and gettering[J].Journal of Vacuum Science and Technology A,1985,A3(02):417. |
[4] | 张艳,尉秀英,秦光荣,熊玉华.钛基非蒸散型吸气剂的性能研究[J].稀有金属,2006(01):52-55. |
[5] | ZHOU Hong-guo,WEI Xiu-ying,MAO Chang-hui,XIONG Yu-hua,QIN Guang-rong.Effects of Mo on the Microstructure and Hydrogen Sorption Properties of Ti-Mo Getters[J].中国航空学报(英文版),2007(02):172-176. |
[6] | Shi L Q;Zhou Z Y;Zhan G Q;He M H .Hydrogenation characteristics and observation of disintegration conditions of Ti-Mo and Ni-ceated Ti-Mo thin films[J].Vacuum Science & Technology A,2001,19(01):240. |
[7] | 郑华,刘实,赵越,王隆保.Ti-10Mo双相合金的吸氢性能[J].金属学报,2003(05):526-529. |
[8] | 赵越,郑华,刘实,杨锐,王隆保.Ti-Mo合金的结构及吸放氢性能研究[J].金属学报,2003(01):89-93. |
[9] | 黄培云.粉末冶金学[M].北京:冶金工业出版社,1997 |
[10] | Ho WF;Ju CP;Lin JH .Structure and properties of cast binary Ti-Mo alloys.[J].Biomaterials,1999(22):2115-2122. |
[11] | 林肇琦.有色金属材料学[M].沈阳:东北工学院出版社,1986 |
[12] | FuruharaT;Maki T;MakinoT .Microatructure control by thermomechanical processing in β-Ti-15-3 alloy[J].Journal of Materials Processing Technology,2001,117:318. |
[13] | 吴安如,夏长清,戴晓元.钛合金表面渗钼涂层的组织和性能研究[J].矿冶工程,2005(03):76-80. |
[14] | 沈桂琴;王世洪;梁佑明;罗国珍 谢丽英 .Ti-15V-3Cr-3Sn-3Al合金的等温转变研究[J].金属热处理学报,1996,17(01):10. |
[15] | Benoit Appolaire;Ludovic Herichcr;Elisabeth Aeby-Gantier .Modelling of phase transformation kinetics in Ti alloys-Isthermal treatments[J].ACTA MATERIALIA,2005,53:3001. |
[16] | X. D. Zhang .Precipitation of ordered ?2 phase in Ti-6-22-22 alloy[J].Acta materialia,1998(13):4485-4496. |
[17] | 周玉;武高辉.材料分析测试技术[M].哈尔滨:哈尔滨工业大学出版社,1998 |
[18] | Sugano M;Tsuchida Y;Satake T;Ikeda M .A microstructural study of fratigue fracture in titanium-molybenum alloys[J].Materials Science and Engineering,1998,243A:163. |
[19] | 翟甲友,王锋华,罗联,马蓦,林建国.钼含量对Ti-xMo-7.5Nb-1Sn合金力学性能的影响[J].稀有金属,2008(06):684-688. |
[20] | Xiong H P;Zhang L M;Shen Q;Yuan R Z .Frabrication of Mo-Ti functionally graded materials[J].Transactions of Nonferrous Metals Society of China,1999,9(03):582. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%