欢迎登录材料期刊网

材料期刊网

高级检索

采用等容法研究了机械球磨工艺制备的Li-Mg-N-H材料储氧性能,结果发现,在室温下采用氦气对样品室体积进行标定时,由于Li-Mg-N-H材料对氦气有一定量的物理吸附,造成准确Li-Mg-N-H材料样品体积标定误差,进而造成Li-Mg-N-H储氢材料在503 K下放氢容量随压力的降低而增加异常变化.为准确标定样品体积,通过对Li-Mg-N-H材料室温氮气吸附容量测定,并采用迭代计算方法获得准确的储氢材料样品体积,进而测定Li-Mg-N-H储氢材料503 K下放氢PCT曲线,其表现为放氢容量随压力降低而减小的正常变化规律.Li-Mg-N-H储氢材料503 K,9.6 MPa氢压下的最大储氢容量为4.81%(质量分数),放氢过程表现为单一放氢平台特性.

参考文献

[1] Zhou Li;Zhou Yaping;Sun Yah .Studies on the mechanism and capacity of hydrogen uptake by physisorption-based materials[J].International Journal of Hydrogen Energy,2006,31:259.
[2] 蒋于伟,刘晓鹏,李志念,张立冬,蒋利军,王树茂,李国斌.LaNi3.8Al0.75Mn0.45Zrx (x=0, 0.05, 0.1)合金的贮氢及抗粉化性能[J].稀有金属,2008(03):294-299.
[3] Antek G.Wong-Foy;Adam J.Matzger;Omar M.Yaghi .Exceptional H_2 Saturation Uptake in Microporous Metal-Organic Frameworks[J].Journal of the American Chemical Society,2006(11):3494-3495.
[4] Nakamori Y;Kitahara G;Miwa K;Ohba N,Noritake T,Towata S,Orimo S .Hydrogen storage properties of Li-Mg-N-H systems[J].Journal of Alloys and Compounds,2005,404-406:396.
[5] Ichikawa T;Lang H Y;Isobe S;Hanada N,Fujii H .Recent development on hydrogen storage properties in Metal-N-H system[J].Journal of Power Sources,2006,159(01):126.
[6] Keisuke Okamoto;Kazuhiko Tokoyoda;Takayuki Ichikawa .A process for synthesizing the Li-Mg-N-H hydrogen storage system from Mg and LiNH_2[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2007(1/2):289-292.
[7] Luo Weifang;Wang Jim;Ken Stewart;Miles Clift Karl Cross .Li-Mg-N-H:Recent investigations and developroent[J].Journal of Alloys and Compounds,2007,446-447:336.
[8] 钱晓静,黄国强,林波.Mg-Ni系贮氢合金的改性[J].稀有金属,2008(01):107-114.
[9] Jianjiang Hu;Yongfeng Liu;Guotao Wu .Improvement of Hydrogen Storage Properties of the Li-Mg-N-H System by Addition of LiBH4[J].Chemistry of Materials: A Publication of the American Chemistry Society,2008(13):4398-4402.
[10] Belmabkhont Y;Frere M;Weireld G De .High-presanre adsorption measurements.A comparative study of the volumetric and gravimetric methods[J].Measurement Science and Technology,2004,15:848.
[11] Kiyobayashi Tetsu;Hiroyuki T;Tanaka Hideaki;Takeichi Nobuhiko,Zuttel Andreas,Schlapbach Louis,Kuriyamaet Nobuhiro .Hydrogen adsorption in carbonaceous materials-how to determine the storage capacity accurately[J].Journal of Alloys and Compounds,2002,330-332:666.
[12] Anson A;Benham M;Jagiello J;Callejas M A Benito A M Maser W K Zuttel Z Sudan P Martinez M T .Hydrogen adsorption on a single-walled carbon nanotube material:a comparative study of three different adsorption techniques[J].NANOTECHNOLOGY,2004,15:1503.
[13] Lee Yong-Won;Clemens Bruce M;Gross Karl J .Novel Sieverts'type volumetric measurements of hydrogen storage properties for very small sample quantities[J].Journal of Alloys and Compounds,2008,452:410.
[14] Zlotea Claudia;Moretto Pietro;Steriotis Theodore .A round robin characterization of the hydrogen sorption properties of a carbon based material[J].International Journal of Hydrogen Energy,2009,34:3044.
[15] Zhang Chao;Lu Xuesheng;Gu Anzhong .How to accurately determine the uptake of hydrogen in carbonaceous materials[J].International Journal of Hydrogen Energy,2004,29:1271.
[16] Blach T P;Gray E M .Sieverts apparatus and methodology for accurate determination of hydrogen uptake by light-atom hosts[J].Journal of Alloys and Compounds,2007,446-447:692.
[17] Zhou Li;Zhou Yaping .Determination of compressibility factor and fugacity coefficient of hydrogen in studies of adsorptive storage[J].International Journal of Hydrogen Energy,2001,26:597.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%