采用硬度测试、透射电镜(TEM)和差示扫描量热分析(DSC)等方法,研究了多级断续时效对高Cu/Mg比Al-Cu-Mg-Ag-Zr合金组织和性能的影响.结果表明,断续时效第二级低温时效对合金硬度无明显影响,第三级高温时效对硬度影响较大,随着时间的延长,硬度先增大且在160℃时效20 h左右达到最大值后减小.透射电镜和DSC证明在断续时效的不同阶段,合金的沉淀析出特征:在第一阶段高温时效中,Ω相和θ'相同时析出,两种析出相的数量无明显差别;在第二阶段低温时效中,θ'相持续析出,无明显的Ω相析出特征;在第三阶段高温再时效中,Ω相和θ'相同时析出长大,Ω相为主要强化相,θ'相相对较少.
参考文献
| [1] | L.Reich;M.Murayama;K.Hono .Evolution of Ω phase in an Al-Cu-Mg-Ag alloy- a three-dimensional atom probe study[J].Acta materialia,1998(17):6053-6062. |
| [2] | 熊益民,张永安,朱宝宏,王锋,刘红伟,熊柏青.Al-4.8Cu-0.5Mg-0.3Ag-0.15Zr合金的热变形研究[J].稀有金属,2009(01):6-11. |
| [3] | Hirosawa S.;Kamio A.;Sato T. .Effects of Mg addition on the kinetics of low-temperature precipitation in Al-Li-Cu-Ag-Zr alloys[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1998(1/2):195-201. |
| [4] | Ringer S P;Hono K;Pohnear I;Sakurai T .Nucleation of pre-cipitates in aged Al-Cu-Mg-(Ag)alloys with high Cu:Mg ratios[J].Acta Materialia,1996,44:1883. |
| [5] | Suh I S;Park J K .Influence of the elastic strain-energy on the nucleation of Ω-phase in Al-Cu-Mg(-Ag)alloys[J].Scripta Metallurgica et Materialia,1995,33:205. |
| [6] | Kerry S;Scott V D .Structure an orientation relationship of pre-cipitates fromed in Al-Cu-Mg-Ag alloys[J].Metal Science Journal,1984,18:289. |
| [7] | Donnell R G O';Lumley R N;Pobnear I J.Observations of de-formation in secondary aged aluminium alloys[A].Australia,2004:975. |
| [8] | Lumley R N;Buha J;Pohmear I J;Morton A J Crosby A G .Secondary precipitation in aluminium alloys ＆ its role in modern heat treatmrem[J].Materials Science Forum,2006,519-521:283. |
| [9] | Sonwra A;Macehi C E;Lumley R N;Pohnear I J Dupasquier A Ferragut R.Role of vacancies during creep and secondary precipitation in m underaged Al-Cu-Mg-Ag alloy[J].Physical Status Solidi C,2007(04):3473. |
| [10] | Lumley R N;Pohnear I;Morton A.Temper developments using secondary ageing[A].Melboume:Institute of Mate-rials Engineering Australia Ltd,2004:85. |
| [11] | 张坤,戴圣龙,黄敏,杨守杰,颜鸣皋.高纯Al-Cu-Mg-Ag合金的多级断续时效工艺研究[J].航空材料学报,2007(04):1-5. |
| [12] | Beffort O.;Uggowitzer PJ.;Speidel MO.;Solenthaler C. .HIGH TOUGHNESS AND HIGH STRENGTH SPRAY-DEPOSITED ALCUMGAG-BASE ALLOYS FOR USE AT MODERATELY ELEVATED TEMPERATURES[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1995(1/2):121-134. |
| [13] | Taylor J A;Parker B A;Polmear I J .Precipitation in Al-Cu-Mg-Ag casting alloy[J].Metal Science Journal,1978,12:478. |
| [14] | Hono K;Sano N;Bsbu S S;Okano R Sakurai T .Atom probe study of the precipitation process in Al-Cu-Mg-Ag alloys[J].Acta Metallurgica Et Materialia,1993,41:829. |
| [15] | Li Q.;Shenoy RN. .DSC AND TEM CHARACTERIZATIONS OF THERMAL STABILITY OF AN AL-CU-MG-AG ALLOY[J].Journal of Materials Science,1997(13):3401-3406. |
| [16] | Jena A K;Gupta A K;Chaturvedi M C .A differential scanning calorimetric investigation of precipitation kinetics in the Al-1.53wt% Cu-0.79wt% Mg alloy[J].Acra Mefall,1989,37:885. |
| [17] | Abis S;Mengucei P;Riontino G .Influence of Si additions on the ageing process of an Al-Cu-Mg-Ag alloy[J].Philosophical Magazine A:Physics of Condensed Matter:Structure,Defects and Mechanical Properties,1994,70:851. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%